
•Place the light box on a dry, flat working surface.
•Connect to the power by either using the USB cable or the supplied DC
power adapter.
•To turn on –touch the power button gently and the lighted area will light
and gradually brighten.
•To turn off –touch the power button again and the lighted area will turn
off gradually.
•To adjust the brightness, hold the power button and release your finger at
the desired brightness. If you hold the button and the light box is at
maximum brightness, it will not brighten any further.
Care and maintenance
Clean the light box surface with a soft cloth and a nonabrasive cleaner if
necessary. Never apply cleaner directly onto the light box as it may seep inside
the unit.
Environmental Protection
Products bearing the symbol shown above means that used electrical and electronic equipment (WEEE) should not be mixed
with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection
points where it will be accepted free of charge. Disposing of this product correctly will help save valuable resources and prevent
any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste
handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be
applicable for incorrect disposal of this waste, in accordance with your national legislation.
USER MANUAL Model No: 4127
USER MANUAL Model No: 4127
USER MANUAL Model No: 3920
USER MANUAL Model No: 4127
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 3920
USER MANUAL Model No: 4040