RITFIT BLP01 Use and care manual

OWNER’S MANUAL & ASSEMBLY INSTRUCTIONS
LEG PRESS MACHINE
BLP01

SAFETY & PRECAUTIONS
1
13. If you have any questions, please e-mail our
customer service at [email protected].
8. Keep hands and feet away from any moving parts
that are not intended to have body parts nearthem
while in use.
9. Do not insert any object into any openings unless
object is supposed to be inserted into a par
ticularplace(such as a pin in a weight stack).
10. Use this equipment only for its intended use as
describedin manual.
11. Always wear appropriate workout clothing and
shoes when exercising.DO NOT WEAR ROBES
OR OTHER CLOTHING THAT COULD BECOME
CAUGHT IN THE EOUIPMENT.
12. BEFORE BEGINNING ANY EXERCISE PROGRAM,
CONSULT YOUR PHYSICIAN.
1. Keep children and pets away from this equipment.
2. Always inspect equipment prior to use to assure
the structualintegrity. Some parts may need
occasionalmaintenance dueto wearand tear.
3. Lubricate moving parts as needed ( depends on
use but once a month is a good rule to follow).
4. One person at a time should use this equipment
unless otherwise designed for safety (example:
spotter stand on some weight benches).
5. lf dizziness, nausea, chest pains, or any other
abnormalsymptoms are experienced while using
this equipment, stop the workout at once.
CONSULTAPHYSICIANIMMEDIATELY.
6. Always use this equipment on a level surface. Do
not use outdoors ornear water.
7. Before using this equipment, always do stretching
exercise to warm up.
Note: This item is shipped in an unusualshaped box. Please hold on to the box until
you feel there's no need to return the product. Place the manual in a safe place in
your home or office.
RETAIN OWNER'S MANUAL FOR FUTURE REFERENCE.
IMPORTANT: READ ALL PRECAUTIONS CAREFULLY BEFORE USING THIS PRODUCT.
In the event should you find this product has either a defective or a missing part, do not use substitute
partsor try to use the unit in an incomplete form. Please contact RITFIT for a replacement.
Additionalfeatures on products may be added during seasonal production but may not be featured in lineart
diagrams at time of production. Changes of such will not affect the performance or assembly of the unit.f
vou would like further clarification during vour assembly process please feel free to contact RITFIT
for direction.
This product has been designed for light commercial or home use only. Light commercial can be defined
asa location with multiple users but not in a membership setting. Examples would be hotels, fire
departmentshigh schools, etc. Commercial use would include, but not limited to, locations that accept
membership foruse of equipment.
This exercise equipment was designed and built for optimum safety. However certain operator precautions
apply whenever you operate a piece of exercise equipment. Please note the following safety procedures:
THE MAXIMUM WEIGHT CAPACITY SHALL NOT EXCEED 1200 LBS.
KEEP CHILDREN UNDER 13 AND PETS AWAY FROM THE LEG PRESS MACHINE.
INSPECT AND TIGHTEN ALL PARTS EACH TIME AND REPLACE ANY WORN PARTS IMMEDIATELY.
WARNING
PRODUCT USE AND MAINTENANCE
The RitFit Leg Press Machine should be repaired only by authorized persons. NEVER
modify the RitFit Leg Press Machine or attempt to repair the unit equipment without first
calling our Customer Service Department. Always notify authorized personnel to make
such repairs.

Leg Press Machine Warranty
Basic Warranty
B. Who Is Covered?
You are covered by the Basic Warranty if you are a purchaser for use of the
RitFit Leg Press Machine.
C. What’s Covered?
The Basic Warranty covers the cost of all parts and labor needed to repair any item
on your Leg Press Machine when it left the manufacturing plant that is defective in
material, workmanship or factory preparation. These warranty repairs or adjustments
will be made by RitFit at no charge, using new or remanufactured parts.
D. When It Begins?
The Basic Warranty begins on the day of order.
E. When It Ends?
The Basic Warranty lasts for 36 months from the date it begins, but the following items
are covered only for 12 months: bolts; nuts; washers; tube bushings; foot covers;
pulley sleeve; pulleys; chains; gourd buckles; cables; top beam; J-hooks; plate carriage;
pulley brace; plate storage pegs.
F. What’s Not Covered?
Please note that while the standard Basic Warranty applies to defects in material
and/or workmanship, it does not cover the Leg Press Machine’s matte finish appearance.
Maintaining the matte finish appearance is solely the responsibility of the owner.
Basic Warranty doesn’t cover damage caused by environmental factors such as
airborne fallout, insect damage, chemicals, salt, and ocean spray. Nor do your
warranty cover damage caused by hailstorms, windstorms, tornadoes, sandstorms,
lightning, floods, and earthquakes. Your warranty does not cover conditions resulting
from anything impacting the multifunctional Leg Press Machine.
G. How To Contact Us?
To ensure you receive the best technical support, please visit our website:
www.ritfitsports.com and register your warranty. Customers with registered
warranties are given a profile that allows for easier support and for us to contact
you with important product notifications. If any parts are missing, worn, damaged
or broken before the assembly, or you ever need to replace the parts, please contact
us at [email protected].
2
WARRANTY
A. What’s Covered Under RitFit LLC’s Basic Warranty?

BEFORE YOU BEGIN
For your benefit, read this manual carefully before using the Multifunctional Leg Press Machine.
If you have additional questions, please email our Customer Service Department at
[email protected]. To help us assist you, please note the product model number
and serial number before calling. The model number is BLP01.
Handle
Limit Holder
Seat
Plate Storage
CAPACITY: 1200 LBS
3
Thank you for selecting the versatile RITFIT®Leg Press Machine. RITFIT®Leg Press Machine
is designed to be used with weight training system to help you develop your lower muscle
group of the body.
BEFORE READING FURTHER, PLEASE REVIEW THE DRAWING BELOW AND FAMILIARIZE
YOURSELF WITH THE PARTS THAT ARE LABELED.
Back
Left Side
Right Side
Front

·FASTENER AND TOOLS
PARTS LIST
4
M10x90 Square Neck Bolt
6x
a
M10x70 Square Neck Bolt
48x
b
M10x70 Hexagon Socket Button Head Bolt
4x
c
M10x90 Square Neck Bolt
M10x70 Square Neck Bolt
M10x70 Hexagon Socket Button Head Bolt
M10x35 Hexagon Socket Button Head Bolt
M10x25 Hexagon Socket Button Head Bolt
M8x90 Hexagon Socket Button Head Bolt
M8x70 Hexagon Socket Button Head Bolt
M8x30 Hexagon Socket Button Head Bolt
M10x35 Hexagon Socket Button Head Bolt
2x
d
M10x25 Hexagon Socket Button Head Bolt
8x
e
6
NO. DESCRIPTION QUANTITY
48
4
2
8
2
4
2
a
b
c
d
e
f
g
h
M8x90 Hexagon Socket Button Head Bolt
2x
f
M8x70 Hexagon Socket Button Head Bolt
4x
g
M8x30 Hexagon Socket Button Head Bolt
2x
h

5
·FASTENER AND TOOLS
PARTS LIST
Open-Ended Wrench
1x
q
L-Pin
1x
n
M6 Allen Key
1x
o
M10 Large Washer
M10 Washer
M8 Washer
M10 Nut
NO. DESCRIPTION QUANTITY
60
2
68
8
i
j
k
l
L-Pin
M6 Allen Key
Collar 2
1
1
m
n
o
M5 Allen Key 1
p
Open-Ended Wrench 1
q
M10 Nut
60x
i
Collar
2x
m
M10 Washer
68x
k
M8 Washer
8x
l
M10 Large Washer
2x
j
M5 Allen Key
1x
p

6
·Packed in the box
PARTS LIST
Backrest
1x
1Back Cushion
1x
2Slide Frame Base
2x
3
Slider
1x
4Reinforced Frame
1x
5Upper Cross Beam
1x
6
Weldment Frame
1x
7Bottom Cross Beam
1x
8Support frame
1x
9
Bottom Adjusting Frame
1x
10 Connection Frame (Right)
1x
11 Connection Frame (Left)
1x
12
Backrest
Back Cushion
Slide Frame Base
Slider
Reinforced Frame
Upper Cross Beam
Weldment Frame
Bottom Cross Beam
Bottom Adjusting Frame
Connection Frame (Right)
Connection Frame (Left)
Support frame
1
NO. DESCRIPTION QUANTITY
1
2
1
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
9
10
11
12

Packed in the box
PARTS LIST
Side Frame (Right)
1x
13 Side Frame (Left)
1x
14 Seat Cushion Frame
1x
15
Push-off Frame
1x
16 Safety Handrail (Left)
1x
17 Safety Handrail (Right)
1x
18
Plate Carriage
1x
19 Shoulder Pad Frame (Left)
1x
20 Shoulder Pad Frame (Right)
1x
21
Short Sleeve
2x
22 Bolt Plate
15x
23 Handrail Connection Frame
4x
24
Side Frame (Right)
Side Frame (Left)
Seat Cushion Frame
Push-off Frame
Safety Handrail (Left)
Safety Handrail (Right)
Plate Carriage
Shoulder Pad Frame (Left)
Short Sleeve
Bolt Plate
Handrail Connection Frame
Shoulder Pad Frame (Right)
1
NO. DESCRIPTION QUANTITY
1
1
1
1
1
1
1
1
2
15
4
13
14
15
16
17
18
19
20
24
22
23
24
·
7

·Packed in the box
PARTS LIST
Seat Cushion
1x
25 Shoulder Pads
2x
26 L-shaped Reinforced Plate
1x
27
Rubber Pad
2x
28 Triangle Reinforced Plate
1x
29 Guiding Rod
2x
30
Peg
4x
31 Spring
2x
32 Back Cushion Fixing Plate
1x
33
Seat Cushion
Shoulder Pads
L-shaped Reinforced Plate
Rubber Pad
Triangle Reinforced Plate
Guiding Rod
Peg
Spring
Back Cushion Fixing Plate
1
NO. DESCRIPTION QUANTITY
2
1
2
1
2
4
2
1
25
26
27
28
29
30
31
32
33
8

STEP 1 (Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
M10x25 Hexagon Socket Button Head Bolt
M10 Washer
Bottom Cross Beam
Short Sleeve
2
NO. DESCRIPTION QUANTITY
2
1
2
e
k
8
22
8
22
e
k
e
k
9

STEP 2 (Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
M10x70 Square Neck Bolt
M10 Nut
M10 Washer
Weldment Frame
Connection Frame (Right)
Connection Frame (Left)
Triangle Reinforced Plate
8
NO. DESCRIPTION QUANTITY
8
8
1
1
1
1
b
i
k
7
11
12
29
bi
b
k
k
i
i
10
29
b
i
k
k
11
12
7

STEP 3 (Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
M10x70 Square Neck Bolt
M10 Nut
M10 Washer
Support Frame
Bolt Plate
4
NO. DESCRIPTION QUANTITY
4
4
1
2
b
i
k
9
23
b
i
b
k
23
i
23
9
11

STEP 4 (Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
M10 Nut
M10 Washer
M10x90 Square Neck Bolt
M10x70 Square Neck Bolt
Upper Cross Beam
L-shaped Reinforced Plate
2
NO. DESCRIPTION QUANTITY
2
4
4
1
1
i
k
a
b
6
27
b
27
a
i
6
i
k
k
12

STEP 5 (Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
M10 Nut
M10 Washer
M10x70 Square Neck Bolt
Side Frame (Right)
Side Frame (Left)
12
NO. DESCRIPTION QUANTITY
12
12
2
1
1
i
k
b
13
Slide Frame Base
3
14
Bolt Plate 223
b
b
b
13
14
23
i
k
23
b
b
b
ik
3
i
k
ik
13

STEP 6 (Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
M10 Nut
M10 Washer
M10x70 Square Neck Bolt
Seat Cushion Frame
4
NO. DESCRIPTION QUANTITY
4
4
2
1
i
k
b
15
Bolt Plate
23
b
23
i
k
15
14
2x
Note：The flat surface of No.15 must face upward

STEP 7 (Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
Rubber Pad
Guiding Rod
Slider 1
NO. DESCRIPTION QUANTITY
2
2
28
30
4
28
30
4
15

STEP 8 (Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
M10x25 Hexagon Socket Button Head Bolt
NO. DESCRIPTION QUANTITY
4
4
e
M10 Washer
k
e
k
k
e
16
2x
2x

b
STEP 9 (Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
M10 Nut
M10 Washer
M10x70 Square Neck Bolt
Plate Carriage
Bolt Plate
6
NO. DESCRIPTION QUANTITY
6
6
1
1
3
i
k
b
19
Reinforced Frame
5
23
b
19
i
k
i
k
23
ik
5
b23
17

STEP 10 (Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
Shoulder Pad Frame (Left)
Shoulder Pad Frame (Right)
M8 Washer
M8x70 Hexagon Socket Button Head Bolt
4
NO. DESCRIPTION QUANTITY
1
1
2
4
20
21
l
g
Shoulder Pads
26
g
l
l
20
26 21
18