RITFIT BLP01 Use and care manual

OWNER’S MANUAL & ASSEMBLY INSTRUCTIONS
LEG PRESS MACHINE
BLP01

SAFETY & PRECAUTIONS
13. If you have any questions, please e-mail our
customer service at support@ritfitsports.com.
8. Keep hands and feet away from any moving par-
ts that are not intended to have body parts near
them while in use.
9. Do not insert any object into any openings unless
object is supposed to be inserted into a particular
place (such as a pin in a weight stack).
10. Use this equipment only for its intended use as
described in manual.
11. Always wear appropriate workout clothing and
shoes when exercising. DO NOT WEAR ROBES OR
OTHER CLOTHING THAT COULD BECOME CAUGHT
IN THE EQUIPMENT.
12. BEFORE BEGINNING ANY EXERCISE PROGRAM,
CONSULT YOUR PHYSICIAN.
1. Keep children and pets away from this equipment.
2. Always inspect equipment prior to use to assure
the structual integrity. Some parts may need
occasional maintenance due to wear and tear.
3. Lubricate moving parts as needed ( depends on
use but once a month is a good rule to follow).
4. One person at a time should use this equipment
unless otherwise designed for safety (example:
spotter stand on some weight benches).
5. If dizziness, nausea, chest pains, or any other
abnormal symptoms are experienced while using
this equipment, stop the workout at once. CON-
SULT A PHYSICIAN IMMEDIATELY.
6. Always use this equipment on a level surface. Do
not use outdoors or near water.
7. Before using this equipment, always do stretching
exercise to warm up.
Note: This item is shipped in an unusual shaped box. Please hold on to the box
until you feel there's no need to return the product. Place the manual in a safe
place in your home or office.
RETAIN OWNER'S MANUAL FOR FUTURE REFERENCE.
IMPORTANT: READ ALL PRECAUTIONS CAREFULLY BEFORE USING THIS PRODUCT.
In the event should you find this product has either a defective or a missing part, do not use substitute parts
or try to use the unit in an incomplete form. Please contact RITFIT for a replacement.
Additional features on products may be added during seasonal production but may not be featured in line
art diagrams at time of production. Changes of such will not affect the performance or assembly of the unit.
If you would like further clarification during your assembly process please feel free to contact RITFIT for
direction.
This product has been designed for light commercial or home use only. Light commercial can be defined as
a location with multiple users but not in a membership setting. Examples would be hotels, fire departments,
high schools, etc. Commercial use would include, but not limited to, locations that accept membership for
use of equipment.
This exercise equipment was designed and built for optimum safety. However certain operator precautions
apply whenever you operate a piece of exercise equipment. Please note the following safety procedures:
THE MAXIMUM WEIGHT CAPACITY SHALL NOT EXCEED 440 LBS (200 KG) FOR PLATE LOADING.
KEEP CHILDREN UNDER 13 AND PETS AWAY FROM THE LEG PRESS MACHINE.
INSPECT AND TIGHTEN ALL PARTS EACH TIME AND REPLACE ANY WORN PARTS IMMEDIATELY.
WARNING
PRODUCT USE AND MAINTENANCE
1
The RitFit Leg Press Machine should be repaired only by authorized persons. NEVER modify the RitFit Leg
Press Machine or attempt to repair the unit equipment without first calling our Customer Service Depart-
ment. Always notify authorized personnel to make such repairs.

LEG PRESS MACHINE WARRANTY
2
A. What’s Covered Under RitFit LLC’s Basic Warranty?
Basic Warranty.
B. Who Is Covered?
You are covered by the Basic Warranty if you are a purchaser for use of the RitFit Leg
Press Machine.
C. What’s Covered?
The Basic Warranty covers the cost of all parts and labor needed to repair any item on
your leg press machine when it left the manufacturing plant that is defective in materi-
al, workmanship or factory preparation. These warranty repairs or adjustments will be
made by RitFit at no charge, using new or remanufactured parts.
D. When It Begins?
The Basic Warranty begins on the day of order.
E. When It Ends?
The Basic Warranty for the main frame lasts for 36 months from the date it begins, but
the parts are covered only for 12 months.
F. What’s Not Covered?
Please note that while the standard Basic Warranty applies to defects in material
and/or workmanship, it does not cover the leg press machine’s matte finish appear-
ance. Maintaining the matte finish appearance is solely the responsibility of the owner.
Basic Warranty doesn’t cover damage caused by environmental factors such as
airborne fallout, insect damage, chemicals, salt, and ocean spray. Nor do your warran-
ty cover damage caused by hailstorms, windstorms, tornadoes, sandstorms, lightning,
floods, and earthquakes. Your warranty does not cover conditions resulting from
anything impacting the leg press machine.
G. How To Contact Us?
To ensure you receive the best technical support please visit www.ritfitsports.com to
register your warranty. Customers with registered warranties are given a profile that
allows for easier support and for us to contact you with important product notifica-
tions. If any parts are missing, worn, damaged or broken before the assembly, or you
ever need to replace the parts, please contact us at support@ritfitsports.com.

Handle
Limit Holder
Plate Storage
Seat
CAPACITY: 440LB FOR PLATE LOADING
BEFORE READING FURTHER, PLEASE REVIEW THE DRAWING BELOW AND FAMILIARIZE
YOURSELF WITH THE PARTS THAT ARE LABELED.
Left Side Right Side
Back
Front
BEFORE YOU BEGIN
3
Thank you for selecting the versatile RITFIT® Leg Press Machine. RITFIT® Leg Press Machine is
designed to be used with weight training system to help you develop your lower muscle group of
the body.
For your benefit, read this manual carefully before using the Leg Press Machine. If you have
additional questions, please email our Customer Service Department at support@rit-
fitsports.com. To help us assist you, please note the product model number and serial number
before calling. The model number is BLP01.

·Packed in the box
1Weld To The Ground 1
2Short Connection A 1
3Short Connection B 1
4Welding Of Side Supports 2
5Posterior Canal 1
6Rear Support Welded 1
7On The Connecting Rod 1
8
9
10
11
12
Left Strut
Right Strut
Bell Rack
Reinforced Frame
Shoulder Pads Frame A
1
1
1
1
1
NO.DESCRIPTIONQUANTITY
PARTS LIST
1 Weld To The Ground
1x
2 Short Connection A
1x
3 Short Connection B
1x
4 Welding Of Side Supports
2x
5 Posterior Canal
1x
6 Rear Support Welded
1x
7 On The Connecting Rod
1x
8 Left Strut
1x
9 Right Strut
1x
10 Bell Rack
1x
11 Reinforced Frame
1x
12 Shoulder Pads Frame A
1x
4

·Packed in the box
13 Reinforced Frame B 1
14 Push-off Frame 1
15 Sliding Frame 1
16 Guide Bar 2
17 Cushion 2
18 L-sheet Stiffener 1
19 Knob 1
20
21
22
23
24
Seat Frame Tube
Backrest
Inner Tube
Exernal Tube
Shelving Rack
1
1
1
1
2
NO.DESCRIPTIONQUANTITY
PARTS LIST
5
13 Reinforced Frame B
1x
14 Push-off Frame
1x
15 Sliding Frame
1x
16 Guide Bar
2x
17 Cushion
2x
18 L-sheet Stiffener
1x
19 Knob
1x
20 Seat Frame Tube
1x
21 Backrest
1x
22 Inner Tube
1x
23 Exernal Tube
1x
24 Shelving Rack
2x

·Packed in the box
25 Seat Frame Tube 4
26 Limit Fixed Frame 4
27 Limit Holder A 1
28 Limit Holder B 1
29 Cushion Fixing Plate 1
30 Shoulder Pads 2
31 Seat Cushion 1
32
33
34
35
36
Back Cushion
Sheet Stiffener
90 Connection Sheet
110 Connection Sheet
Withdrawal
1
1
4
9
1
NO.DESCRIPTIONQUANTITY
PARTS LIST
25 Seat Frame Tube
4x
26 Limit Fixed Frame
4x
27 Limit Holder A
1x
28 Limit Holder B
1x
29 Cushion Fixing Plate
1x
30 Shoulder Pads
2x
31 Seat Cushion
1x
32 Back Cushion
1x
33 Sheet Stiffener
1x
34 90 Connection Sheet
4x
35 110 Connection Sheet
9x
36 Withdrawal
1x
6

·FASTENER AND TOOLS
51
52
53
54
55
56
Large Gasket (10)
Gasket (8)
Gasket (10)
Nut
M8*90 Bolt
M10*90 Bolt
M10*70 Bolt
4
8
66
60
2
NO.DESCRIPTIONQUANTITY
57
M10*70 Bolt
M10*30 Bolt
M10*25 Bolt
M8*30 Bolt
M8*70 Bolt
Butterfly Card
L-pin
48
6
58
59
60
61
62
63
64
4
2
10
3
4
2
1
PARTS LIST
51 Large Gasket (10)
4x
52 Gasket (8)
8x
53 Gasket (10)
66x
54 Nut
60x
55 M8*90 Bolt
2x
56 M10*70 Bolt
48x
57 M10*90 Bolt
6x
58 M10*70 Bolt
4x
59 M10*30 Bolt
2x
60 M10*25 Bolt
10x
61 M8*30 Bolt
3x
62 M8*70 Bolt
4x
63 Butterfly Card
2x
64 L-pin
1x
7

1
STEP 1
1
2
3
5
24
33
53
54
Weld To The Ground
1
Short Connection A
1
Short Connection B
1
Posterior Canal
2
Shelving Rack
1
Sheet Stiffener
10
Gasket (10)
8
Nut
56 8
M10*70 Bolt
60 2
M10*25 Bolt
NO.DESCRIPTIONQUANTITY
(Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
1. Connect 1 #, 2 # and 3 # components with four 56 # components, four 53 # components
and four 54 # components as shown in the figure, and do not tighten them temporarily.
2. Connect 1 #, 5 # and 33 # pieces with four 56 # pieces, four 53 # pieces and four 54 #
pieces as shown in the figure, and do not tighten them temporarily.
3. Connect the two 24 # pieces with two 60 # pieces and two 53 # pieces as shown in the
figure and fasten them.
8

2
STEP 2
4
6
7
8
9
18
20
34
Welding Of Side Supports
1
Rear Support Welded
1
On The Connecting Rod
1
Left Strut
1
Right Strut
1
L-sheet Stiffener
1
Seat Frame Tube
4
90 Connection Sheet
35 2
110 Connection Sheet
53 24
Gasket (10)
54 24
Nut
56 22
M10*70 Bolt
57 2
M10*90 Bolt
NO.DESCRIPTIONQUANTITY
(Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
9
1. Connect 5, 6 and 33 # pieces with two 35 # pieces, four 56 # pieces, four 53 # pieces and
four 54 # pieces as shown in the figure, and do not fasten them temporarily.
2. Connect 6 and 7 # pieces with one 18 # piece, two 57 # pieces, two 56 # pieces, four 53 #
pieces and four 54 # pieces as shown in the figure, and do not fasten them temporarily.
3. Two 4 #, one 8 #, and one 9 # pieces are connected to 2 #, 3 #, and 7 # pieces respective-
ly with twelve 56 # pieces, twelve 53 # pieces, and twelve 54 # pieces as shown in the
figure. They will not be fastened temporarily.
4. Connect two 34 # pieces, four 56 # pieces, four 53 # pieces and four 54 # pieces of 20 #
pieces to 8 # and 9 # pieces.

STEP 2(Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
10

1
STEP 3
10
11
15
16
17
35
36
53
Bell Rack
1
Reinforced Frame
1
Sliding Frame
2
Guide Bar
2
Cushion
3
110 Connection Sheet
1
Withdrawal
10
Gasket (10)
54 6
Nut
56 6
M10*70 Bolt
60 4
M10*25 Bolt
NO.DESCRIPTIONQUANTITY
(Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
11
1. Thread two 17 # pieces and 15 # pieces onto two 16 # pieces, connect them with four 60
# pieces and four 53 # pieces as shown in the figure, and fasten them onto 8 # and 9 #
pieces.
2. Connect three 35 # pieces, six 56 # pieces, six 53 # pieces and six 54 # pieces for 10 # and
11 # pieces as shown in the figure and fasten them on 15 # pieces.
3. Install 36 # parts into 35 # parts.

1
STEP 4
12
13
30
52
53
54
56
57
Shoulder Pad Frame A
1
Shoulder Pad Frame B
2
Shoulder Pads
4
Gasket (8)
8
Gasket (10)
8
Nut
4
M10*70 Bolt
4
M10*90 Bolt
62 4
M8*70 Bolt
NO.DESCRIPTIONQUANTITY
(Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
1. Connect 12 # and 13 # pieces with four 56 # pieces, four 57 # pieces, eight 53 # pieces
and eight 54 # pieces as shown in the figure and fasten them on 15 # pieces.
2. Two 30 # pieces are connected with four 62 # pieces, and four 52 # pieces are respec-
tively connected and fastened on 12 # and 13 # pieces as shown in the figure.
12
56
56
56

1
STEP 5
14
53
54
59
Push-off Frame
2
Gasket (10)
2
Nut
2
M10*30 Bolt
NO.DESCRIPTIONQUANTITY
(Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
13
1. Connect 14 # pieces with two 59 # pieces, two 53 # pieces and two 54 # pieces as shown
in the figure and fasten them on 15 # pieces.

1
STEP 6
26
27
28
35
Limit Fixed Frame
1
Limit Holder A
1
Limit Holder B
4
110 Connection Sheet
51 4
Large Gasket (10)
53 8
Gasket (10)
54 8
Nut
56 8
M10*70 Bolt
60 4
M8*70 Bolt
NO.DESCRIPTIONQUANTITY
(Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
1. First insert eight 56 # pieces into four 26 # pieces respectively, insert four 26 # pieces
into both ends of 27 # and 28 # pieces respectively, and fix them with four 51 # pieces and
four 60 # pieces.
2. Connect eight 56 # pieces, eight 53 # pieces, eight 54 # pieces and four 35 # pieces on 26
# pieces to 8 # 9 # pieces.
14

1
STEP 7
19
21
22
23
Knob
1
Backrest
1
Inner Tube
1
Exernal Tube
53 4
Gasket (10)
54 4
Nut
58 4
M10*70 Bolt
61 1
M8*30 Bolt
NO.DESCRIPTIONQUANTITY
(Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
15
1. Put 22 # pieces into 23 # pieces and connect them with one 19 # piece and one 61 #
piece; (already preassembled)
2. Connect 23 # piece with 1 # piece with one 58 # piece, one 53 # piece and one 54 #
piece;
3. Two 58 # pieces, two 53 # pieces and two 54 # pieces are used for 21 # pieces, which are
connected to two 4 # pieces as shown in the figure;
4. Connect 21 # and 22 # parts as shown in the figure with one 58 # part, one 53 # part and
one 54 # part.

2
STEP 8
24
25
29
31
Shelving Rack
4
Seat Frame Tube
1
Cushion Fixing Plate
1
Seat Cushion
32 1
Back Cushion
52 4
Gasket (8)
55 2
M8*90 Bolt
61 2
M8*30 Bolt
63 2
Butterfly Card
64 1
L-pin
NO.DESCRIPTIONQUANTITY
(Two People Are Required.)
ASSEMBLY AND ADJUSTMENT
1. Connect 31 # pieces with two 55 # pieces and two 52 # pieces and fasten them on 20 #
pieces;
2. Connect and fasten 29 # and 32 # pieces with two 61 # pieces and two 52 # pieces as
shown in the figure, and hang them on 15 # or 21 # pieces through 64 # pieces.
3. Insert four 25 # pieces into two 24 # pieces and 10 # pieces as shown in the figure,
fasten them with a small hexagon wrench, and clip two 63 # pieces onto the counter-
weight frame as shown in the figure above.
16

You have assembled the Leg Press Machine!
Now, you can officially start strength training with RITFIT.
Congratulations!
END
73.3 in
37.7 in
55.8 in

www.ritfitsports.com [email protected]
.