Riverside Furniture 37216 User manual

Made in Viet Nam
email: [email protected]
Components and Hardware List
Page 1 of 3
Table Top
8 pcs.
D C
1 pc.
ABFG E
Important Use Information: We recommend using coasters,
placemats and trivets when placing hot or cold containers
on this item. It is also recommended to quickly cleanup any
spills to minimize exposure to moisture. Doing so will prolong
the life and look of the item for many years.
Warning :
- Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
- To prevent possible scratches and damage, this furniture MUST
BE ASSEMBLED BY TWO PEOPLE on a soft surface such as
a blanket or carpet.
Cora
Occasional Tables
Assembly Instructions
Leg Assembly (Right) Leg Assembly (Left)
1 pc. 1 pc.
Allen Head Bolt
1/4''-20 x 1-1/2" Spring Washer
1/4''
8 pcs. 8 pcs.
Flat Washer
1/4" x 16*2mm
1 pc.
4mm Allen Key
HIJ
Screw Driver
not included
Tipping
Restraint Kit
2 set.
2 pcs.
Wood Screw
#8 x 1-1/4"
Bottom Stretcher
1 pc.
DOWN
UP
A
STEP 1: Remove both side drawers
37216
Sofa Table with 3 stool

Made in Viet Nam
Page 2 of 3
Cora
Occasional Tables
Assembly Instructions
email: [email protected]
STEP 2:
I
EFGH
E
F
G
H
B
D
C
I
Donotfullytightenthebolts
STEP 3: Using the Allen key and a Phillips head screw driver, tighten all bolts, then
tighten all screws.
37216 Sofa Table with 3 stool

Made in Viet Nam
Page 3 of 3
37216 Sofa Table with 3 stool
Cora
Occasional Tables
Assembly Instructions
email: [email protected]
STEP 5:
STEP 4:
AdjustableLeveler
4cs
Attach both side drawers
For product and personal safety, two Furniture Tipping Restraint kits have been included with this unit
which can help to minimize the risk of the unit accidentally tipping forward, if used and properly installed
per the kit manufacturer's instructions.
Furniture Tipping Restraint Kit
inside bag
(J)

Made in Viet Nam
email: [email protected]
Page 1 of 2
A
Warning :
- Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
- To prevent possible scratches and damage, this furniture MUST
BE ASSEMBLED BY TWO PEOPLE on a soft surface such as
a blanket or carpet.
Cora
Occasional Tables
Assembly Instructions
37216 Stool
8 pcs.
H G EFI
1 pc.
Seat cushion
1 pc.
Leg Stretcher
3 pcs.
4 pcs. 1 pc.
BCD
8 pcs.
Allen Head Bolt
1/4''-18 x 2" Spring Washer
1/4''
8 pcs. 8 pcs.
Flat Washer
1/4" x 16*2mm 4mm Allen Key Wood Screw
#8 x 1-1/4"
Front Stretcher
(Metal Cap)
STEP 1: Donotfully tightenthebolts
F
H
E
B
A
G
Components and Hardware List

Made in Viet Nam
Page 2 of 2
Cora
Occasional Tables
Assembly Instructions
email: [email protected] 37216 Stool
Complete
FrontMetalCap
1Pc
D
C
C
C
I
STEP 2: Using the Allen key and a Phillips head screw driver, tighten all bolts, then
tighten all screws.