Riverside Furniture 73061 User manual

ASSEMBLY INSTRUCTIONS
Model : 73061/73062/73063
Description : Plantation Key Queen Bed
No Description Qty
A Headboard Bed(Packed Separately) 1
B Footboard Bed(Packed Separately) 1 No Qty
C Bed Rail(Packed Separately) 2 1 #8 x 1 1/4" Pan Head Screw 8
D
Bed Slat(Packed Inside Bed Rails)
4
EBed Support(Packed Inside Bed Rails) 4
FPoster (Short)(Pack with Headboard) 2
GPoster (Long)(Pack with Footboard) 2
Description
Hardware List (Packed Inside Bed Rail)
Component List
IMPORTANT NOTE:
* Place all wooden parts on a clean and smooth surface
such as a rug or carpet to avoid the parts from being
scratched.
* Check to be sure that you have all parts and hardware.
* Remove all wrapping materials, including staples &
packing straps before you start to assemble.
* Do not tighten all screws/bolts until all completely
assembled.
* Keep all hardware parts out of reach of children.
PAGE 1 OF 3

STEP 1:
Insert the Bed Rails (C) into the hole of Headboard and Footboard (A,B).
STEP 2.1:
Fasten the bed Slat (D) and Bed Slat Support (E) together.
STEP 2.2:
Attach the Bed Slat (D) to the pre-drilled hole of Bed Rail (C).Fasten the Bed Slat (D) by tighten with Screw (1).
PAGE 3 OF 3
PAGE 2 OF 3

PAGE 1 OF 3
PAGE 3 OF 3
F
G