Riverside Furniture 41840 User manual

Riverside
FURNITURE
email: [email protected]
Made in Viet Nam
Page 1 of 2
Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
TV Console
Item #41840
Summit Entertainment
TV Console
Assembly Instructions
2 PCS.
(C)
ASSEMBLY PROCEDURE:
1. Place the TV Console on its top, or back, on a soft and
smooth surface.
2. Screw the Bun Feet (B) to the bottom of the TV Console
(A) as shown in DETAIL A.
3. Turn the assembled TV Console upright
4. If using the Pier, then remove the side mouldings as shown in
DETAIL B.
1 PC. 4 PCS. 4 PCS. 4 PCS.
4 PCS. 8 PCS. 4 PCS.
1 pc.
4 PCS.

Riverside
FURNITURE
email: [email protected]
Made in Viet Nam
Page 2 of 3
Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.
Item #41840/#41842
#41848/#41849
Summit Entertainment
Assembly Instructions
ASSEMBLY PROCEDURE:
1. Carefully place the Hutch onto the top of the TV Console, as shown in DETAIL A.
2. Using the Metal Plates (L), Screws (M) and your Phillips Screwdriver, attach the Hutch to the top of the TV Console.
3. Place the Left Pier & Right Pier on the two sides of the TV Console.
4. After moving the Console and Pier cabinet together, connect units together using the Connector Bolts through the
holes in the sides as shown in DETAIL C.
If no Piers are being used, then install the Wood Plug into the holes on the outside of the TV Console.
41842 Hutch 41840 TV Console 41848/41849 Pier L&R
1 PC. 1 PC. 2 PCS.