Home Styles Barnside Corner Table 88 5516 17 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5516 17
Barnside
Corner Table
Head Cap Bolt
4 Pcs.(+1 extra)
Cam Lock Screw
12 Pcs.(+1 extra)
Cam Lock
12 Pcs.(+4 extra)
Tools required for assembly : Phillips screwdriver
B.
Side Frame
2 Pcs.
C.
Apron
2 Pcs.
A.
Top
1 Pc.
D.
Stretcher
2 Pcs.
Hex Wrench
1 Pc. Small Hex Wrench 1 Pc.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
STEP 1
Insert Cam Lock Screws into the pre-drilled holes
of Top (A) and Side Frames (B). (see Figure 1)
B
B
B
B
B
B
B
B
B
A
C
C
B
D
B
D
STEP 2
Attach Aprons (C) and Stretchers (D)
to Side Frame (B) with Cam Locks
and Head Cap Bolts. (see Figures 2 and 3)
Attach Side Frame (B) to unit with Cam Locks and Head Cap Bolts.
Cam Lock Screw
Cam Lock Screw
Cam Lock
Head CAp Bolt
Figure 1
Figure 2
Figure 3
/3

Assembly Instructions 3
B
A
/3
STEP 3
Attach Top (A) to unit with Cam Locks.
To level the unit, adjust the adjustable levelers on the
bottom of the legs. (See figure 4)
Note: Unit must be level to work properly. Figure 4