Riverside Furniture Aberdeen Dining Room 21358 User manual

Riverside
Components and Hardware List (for one chair)
FURNITURE
Made in Viet Nam
Page 1 of 2
Aberdeen
Dining Room
Assembly Instructions
Steps:
1. Place the Chair Back Assembly (A) on a soft and smooth surface such as a blanket or carpet.
2. Attach Chair Seat (B) to the Back Assembly by using the 3-1/4" long Bolt (D) Spring Washer (G)
and Flat Washer (H) into the back corners of the Seat and 1-1/2" long Bolt (F) Spring Washer (G)
and Flat Washer (H) into the middle of the Seat, as shown. Do not fully tighten Bolts until after
next step.
#21358 Side Chair

Riverside
FURNITURE
Made in Viet Nam
Page 2 of 2
Aberdeen
Dining Room
Assembly Instructions
3. Attach Front Legs (C) to the Chair Seat (B) by using the 2-1/4" long Bolts (E) Spring Washer (G) and
Flat Washer (H) as shown in Step 3.
4. Turn the Chair upright on a flat surface to level chair and tighten all Bolts using the Allen Wrench (I).