Riverside Furniture Joelle Quick start guide

#63055
Uph Arm Chair 2in
Components and Hardware List
Made in Viet Nam
Page 1 of 2
Joelle
Dining Room
Assembly Instructions
Be sure to check all packing material carefully
for small parts, which may have come loose
inside the carton during shipment.
Steps:
1. Place the Back Assembly (A) on a soft and smooth surface.
2. Attach Chair Seat (B) to the Back Assembly (A) by using Bolt (E), Spring Washer (H) and Flat
Washer (I) into the back corners of the Seat as shown in Detail 1. and Using Bolt (F), Spring
Washer (H) and Flat Washer (I) into the middle of the Seat as shown in Detail 2 . Do not fully
tighten Bolts until after next step.

Made in Viet Nam
Page 2 of 2
Joelle
Dining Room
Assembly Instructions
3. Attach Front Legs (D) to the Chair Seat (B) by using the Bolts (G), Spring Washer (H) and Flat Washer
(I) as shown in Detail 3.
4. Turn the Chair upright on a flat surface to level chair and tighten all Bolts using the Allen Wrench (J).
5.
Attach the Left and Right Arms (C) to the Chair Seat (B) using Bolt (F) and the same washers as previous
steps. Assemble the back end of the arms to the Back Assembly by using Wood Screws (K) and your
Phillips Screwdriver. Tighten all Bolts by using the Allen Wrench (J), as shown in Detail 4.