Riverside Furniture Sophie 50359 User manual

Components and Hardware List (for one chair)
Made in Viet Nam
Page 1 of 2
Sophie
Dining Room
Assembly Instructions
Ø4 x 1-1/4"
Wood Screw
Steps:
1. Place the Back Assembly (A) on a soft and smooth surface.
2. Attach the Chair Seat (B) to the Back Assembly (A) by using the 3-1/8" long Bolt (F)
Spring Washer (I) and Flat Washer (J) into the back corners of the Seat and 1-3/4" long
Bolt (H) Spring Washer (I) and Flat Washer (J) into the middle of the Seat, as shown.
Do not fully tighten Bolts until after next step.
(H x 2)

Made in Viet Nam
Page 2 of 2
Sophie
Dining Room
Assembly Instructions
3: Install the Right & Left Side Stretchers (D) into the Back Assembly (A) the ends towards the
bottom of the legs. Assemble the Front Stretcher (E) between the Front Legs and assemble the
Left and Right Front Legs (C) to the Stretchers and the Chair Seat. Pull parts together snug to
verify parts are assembled correctly. Attach Legs with the 2-1/8" long Bolts (G), and the same
washers as before.
4: Set the assembled Chair upright on a flat surface to level chair. Reach underneath the Seat
and tighten all Bolts using the Allen Wrench (L).
5: While pulling the Legs and Stretchers snugly together and using your Phillips Screwdriver,
install the Wood Screws (K) at each end of the Stretchers.
(K x 6)