Rixen M-700S User manual

S
SO OI IL L M MO OI IS ST TU UR RE E M ME ET TE ER R
M
M- -7 70 00 0S S
Operation Manual

INDEX
A.
Introductions --------------------------
1
B.
Features ---------------------------------
1
C.
The Panel and Shape ----------------
2
D.
The LCD Display ----------------------
3
E.
Operation Instructions ---------
4 ~ 6
F.
Precaution-----------------------
7
G.
Specifications-----------------------
8
H.
Memo-------------------------------------
9

H. Memo
- 9 -

G. M-700S Specifications
Measurement range
(% WME)
5.5 ~ 55.0%
Accuracy (at 25C)
3% (difference as the testing materials.)
Resolution
0.1%
Display
Multi-Functions Digital LCD display
Operating Range
-10 ~ +50C (with temp. compensated)
Sampling rate
Approx. 1 reading/Sec.
Main Functions
Auto/Manual turn off, Hold function,
Record Maximum & Minimum values,
Built-in Calibrator, Parameter
modification, Power Indicating and low
power warning.
Power Supply
One 9V Battery ,or AC Adaptor (option)
Battery Life
Approx. 250 hours (continues)
Dimensions
Meter
168 × 73 × 33 mm (6.6 ×3.0×1.3 inch)
Probe
150 mm , Cable: 1 meter (Pin Type)
Weight
Approx.180g, (6.3 oz) including battery
Option Accessories
1. AC Adaptor (No.7019)
2. 250mm Twin Electrodes (No.701P)
3. 300mm Single Electrode (No.7013S)
- 8 -

A. Introductions
The Soil Moisture Meter M-700S is the complete instrument for
measuring moisture levels of soils. Read moisture reading of
soils from high accurate digital LCD indicator. Press REC
(Record) and H-D (Hold) keys can record the maximum and
minimum reading, which can be applied at majority sampling
and quality control. M-700S built-in calibration function for
checking condition of instrument. Just press CAL (Calibration)
key and adjust calibration screw to calibration by yourself.
M-700Sis very suit for different environment, and has
temperature compensate function to let reading more accurate,
fast and stable.
※Soil Moisture Meter: After well revised coefficient &
calibration, M-700S is a powerful, fast and accurate soil
moisture meter.
B. Features
High accurate, Auto. temperature compensated.
Function of Auto / Manual Power off and Data Hold ,Records
MAX / MIN reading.
According to measuring material, suitable different type
of probes.
Built-in calibration function for checking condition of
instrument.
One 9V battery powered, As well as AC powered using an
adaptor (Option).
Fast response, Stability, Rugged Design.
- 1 -

C. The Panel and Shape
-2 -
LCD Display
HOLD Key
Power Switch
MODE Key
Moisture Probe in
Offset calibration screw
AC Adaptor connector
DC 9V Battery box
CAL Key

F. Precaution
1.
The power supply is 9V Battery, and can option to use AC
adaptor. Please notice the power supply when operation.
2.
When measuring, please don’t touch the moisture probe,
and don’t use the moisture probe and outside moisture
probe simultaneously to avoid wrong measuring value.
3.
Notice: The range of temperature compensate is –15 ~
+55C. If temperature difference is too far between indoor
and outdoor. Please wait few minutes before measuring to
get accurate value.
4.
Please keep dry of moisture probe, to avoid become rusty
to effect measuring value.
5.
When calibration. Please be sure the moisture probe is not
in measuring.
【Notice】
To measuring special materials, Please contact
your local distributors.
【Notice】
Don’t repair or modify by yourself. Please
contact your local distributors.
- 7 -

Calibration Method:
Turn off the meter. Keep the CAL key pressed and press
key to turn on the power. When display indicate symbol
“CAL” to enter calibration Mode. The indication reading
should be 16.4% (0.5). If need to calibrate, please use
screwdriver to calibrate from right-side of meter.
※After calibration, please turn off the meter to save .
【Notice】
The calibration reading will have deviations in
the operation ambient.
【Notice】
When calibration, please make sure the probe
suspended in midair and can’t contact any
object.
- 6 -

D. The LCD Display
- 3 -
Manual Power off
Calibration Mode
Recording Mode
Moisture Value
Low battery
warns
MAX Value
Hold Value
MIN Value
Recording value warns

E. Operation Instructions
1.
Turn On: Press key to turn on the Meter, It will run to set
up inside Automatic temperture compensation in few
seconds. (display 8888).
※Meter will be auto turn off after 30 seconds.
2.
Manual Turn Off: Keep the key Pressed and press
key to turn on the power, The display will indicate symbol
“E” to enter Manual Power off mode.
※Must press key to turn off the power.
3.
Moisture Measuring: Insert two pins top of the meter (or
optional probe) to materials would like to test, and read
moisture value from display.
※When use roller type Moisture Probe, please be sure
both wheels are press on material and slip slightly.
4.
Hold Function: Press key before the electrodes pins
leave the testing material to hold the reading.
※Press key three times to return normal mode.
5.
MAX. MIN. (Record): Press key before the electrodes
pins leave the testing material to record the reading. Display
indicates symbol “M” and flashing “REC”. Repeat above
method to compare the requisite majority readings.
- 4 -

- 5 -
6.
MAX, MIN (Recall): After step 5. MAX. MIN. (Record),
press key to stop record function (display indicates
“HOLD”). Press key again to read MAX reading (display
indicates “MAX HOLD”). Press key again to read MIN
reading (display indicates “HOLD MIN”).
※Press key will delete all readings and return to normal
mode (“MAX HOLD MIN” will disappear).
7.
Confirm and Calibration: The instrument has pass
through strict quality control and precise calibrate. Please
calibrate when follows situation.
※
The measuring reading than actual reference value is
too far.
※
Measuring reading is not stable to indicate.
※
Using in the ambient environment which is high
temperature and high humidity.
※
Adjustment for test special materials.
※
After repair probe or change new probe (pins).