Rize Home Remedy III User manual

Remedy III
Adjustable bed
SERIAL NUMBER: _____________________________
(Place your serial number here for ready reference)
Owner’s manual

Owner’s manual | Remedy III adjustable bed2Owner’s manual | Remedy III adjustable bed

Safety precautions 4
Parts list 6
Installation guide 7
Remote control guide 13
Special functions 17
Troubleshooting 18
Warranty 21
Table of contents
Model Number: MA004RE03
This product and all our bedding products are covered by one or more of the following issued
and pending U.S. patents including Nos. 9706848, 9744088, 8209801, 9795223, 8769739,
8209800, 9706848, 8769739, D663968, and other patents pending.
Photos are for illustration purposes only.
COPYRIGHT © 2023 by Rize Home, LLC.
07.19.2023

4Owner’s manual | Remedy III adjustable bed
Safety precautions
Attention!
IMPORTANT SAFETY INSTRUCTIONS.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT.
Electrical safety
Always unplug this adjustable bed from the electrical outlet
before any cleaning of the bed. To safely disconnect, make sure
all controls are in the off position, then remove the plug from the
outlet.
Keep cord away from heated surfaces. Keep air openings free
of lint, hair and the like. Never operate when air openings are
blocked. Never drop or insert any object into any opening. Use
only indoors.
Cease use of this adjustable bed and contact the Customer Care
Center for repair if: (1) it has a damaged cord or plug, (2) it is not
working properly, (3) it has been dropped or damaged, or (4) it
has been dropped into water.
Grounding safety
To reduce the risk of electric shock, electrical fire, or faulty
operation of this product, your adjustable bed may feature a
polarized plug meant to be used only with a grounded electrical
outlet. If this plug does not fit into your outlet, contact a
qualified electrician to install a properly grounded outlet.
Failure to use a properly grounded outlet for this product will
compromise this important grounding safety feature. The use
of adapters is not recommended unless the outlet is checked
by a qualified electrician to ensure the proper grounding of the
adapter. NOTE: Unauthorized modifications to this product
could void the electrical portion of your warranty.
Warranty warning!
This bed is specifically designed to require no maintenance by
you, the user. Any opening or tampering with the control box,
motors, or hand controls (with the exception of the battery
compartment if equipped) will result in a void of the warranty.
Only those authorized may conduct repairs or part replacement
on your adjustable bed. Unauthorized modifications to this
product could void the electrical portion of your warranty.
In-home use only
This adjustable bed is designed exclusively for in-home use.
HOSPITAL DISCLAIMER: It is NOT designed for hospital use
and is NOT designed to meet hospital standards. Do not use this
bed with TENT TYPE oxygen therapy equipment or use near
explosive gases.
Important safety features
Weight fail safe feature: In the case that an overload of
weight is placed on the head or foot mechanism, the control
unit will automatically stop all functions. The control unit will
automatically resume all functions 30 seconds after excess
weight is removed.
The recommended weight limitations for your adjustable bed is
up to 850 lbs. on all sizes. For your adjustable bed to structurally
support the recommended weight, weight must be distributed
evenly across the head and foot sections. The adjustable bed will
not and is not intended to support or lift this amount in just the
head or foot section. Dependent on the size and/or model of
mattress, the available weight limit may be less.
Locking caster feature: This adjustable bed may be equipped with
special locking casters. For your safety, these casters will prevent
bed movement when all casters are in the locked position. To
lock casters, push down the safety latch on the caster. To resume
product mobility, lift the safety latch up.
NOTE: If your adjustable bed is positioned on a hard floor
surface such as hardwood or tile, it is strongly recommended that
rubber caster cups or carpet squares are placed under the casters
in addition to locking them in place. Casters will not roll when
locked, but may slide on an uncarpeted surface.
User-serviceable parts
This bed is specifically designed to have no maintenance by you,
the user. Therefore, you are encouraged not to open any motors,
alter the wiring, or adjust, modify or change the structure of the
product, as it will void the warranty.
Radio frequency is 2.4 ghz
FCC compliant device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
FOR OPTIMAL SAFETY, YOUR ADJUSTABLE BED SHOULD BE PLUGGED INTO A
SURGE PROTECTOR (not supplied with this adjustable bed).

5
5
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
IMPORTANT NOTE: To comply with the FCC RF exposure
compliance requirements, no change to the antenna or
the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure
requirements and void user's authority to operate the device.
Consumers with pacemakers
It is possible that the (optional) vibrating feature of this
adjustable bed may be misinterpreted by some pacemakers as
movement and/or exercise. This is common with any product
that produces a vibrating motion, and may or may not affect your
pacemaker. Please consult your physician with any concerns.
Product ratings
Lift Motor Restrictions: The lift motors in this bed are NOT
designed to operate continuously for more than two (2) minutes
over a twenty (20) minute time period, or approximately 10%
duty cycle. To ensure reliable functionality and full life of this
product, do not attempt to exceed these limits.
NOTE: Attempting to circumvent or exceed this rating will
shorten the life expectancy of the product and may void the
warranty.
The structure of the bed will support the recommended weight
when distributed evenly across the bed. The head and foot
sections are not designed to individually support or lift this
amount of weight. For optimal performance, entering and exiting
the adjustable bed with the bed in the flat or level position is
recommended.
NOTE: Exceeding the recommended weight restrictions could
damage your adjustable bed and void your warranty.
Small children and pets
warning
Immediately dispose of all packing materials as it can pose a
smother risk to small children and pets. Injury could occur also
if children or pets are permitted to play on or under the bed. Do
not allow children to operate this bed without adult supervision.
Lift warning
Do not sit on the head or foot sections while in the raised
position, or during lift or lowering cycles.
Moving after installation
Do not place adjustable bed vertically on its head or foot
sections. This may cause injury to persons or damage to
the adjustable bed. Two people are required for moving this
adjustable bed due to its heavy weight.
Safety
When an overload of weight is placed on the head or foot
mechanism, the control unit will automatically stop all functions.
The control unit will automatically resume all functions after the
excess weight is removed.
Massage motors, if any, will automatically shut off after running
continuously for 15 minutes. All massage functions will be
operational again after 5 minutes.
NOTICE: The changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
Read the Owner's Manual carefully and completely before
operating the product. Electric shock may occur if electrical
components are not installed or operated according to these
guidelines.
SAVE THESE INSTRUCTIONS. Proper operation of your adjustable bed is necessary to ensure the long
life and durability you expect from a high-quality product. The manufacturer has tested and inspected this
product prior to shipment.
Safety precautions