
Deluxe Platform Base Assembly
Legs (C)
4 pcs
Side Rails with Brackets (B)
2 pcs
Center Rail Connectors (E)
(King /Cal-King Only)
2 pcs
Cross Slats (F)
10 pcs
INCLUDED PARTS 1. Fully open both Head
and Foot Rails (Part A)
completely and place
them opposite each
other, center leg brackets
facing inward.
2. Fully open both Side
Rails (Part B) and lay
them opposite each
other with the small
brackets facing up.
3. Attach legs (Part C) to
the four ends of Part A.
Push them down until
securely in place.
NOTE: If using a
headboard, make sure
slotted legs are attached
at the head of the base.
4. Open Center Rail (Part
D) and position as
shown. Insert tab ends
of Part D into the center
leg brackets of Part
A and push down to
secure.
5. Lift one corner of Part B
and guide the tabs of the
bracket on Part A into
the wider slots on Part B.
Push down to lock them
in place.
Repeat this for the other
three corners.
REV: 11.30.23
Center Rail (D)
(Not Used on Twin/TXL)
1 pcs
2
Head/Foot Rails (A)
2 pcs
NEED HELP?
1-800-444-8444
1
4
5
B
A
D
C
3
x2 x2
FEATURED: Deluxe Platform Base, Queen