Robam JZ-B594 User manual

Operation Manual
Gas Hob
JZ(Y/T)-B594
编制： 审核： 批准：
All manuals and user guides at all-guidesbox.com
all-guidesbox.com

Contents
Product Overview
Product Structure
Product Parameter
Product Features
Attention
Installation Instruction
Use Instruction
Clean and Maintenance
General Troubleshooting
Attachment
------------------------------------------
------------------------------------------
------------------------------------------ -
----------------------------------
------------------------------------------------------
--------------------------------------
----------------------------------
----------------------------------------------
---- ----------------------------------------------
1
1
2
3
3
5
6
7
8
8
-----------------------------------------
All manuals and user guides at all-guidesbox.com

Product Overview
Product Structure
Product Paramater
Note:Parameters indicate for reference only.The exact detas should be
confirmed on the label on the gas hob.
2.The installation size of built-in gas hob should be confirmed by the
specification on the gas hob.
3.ROBAM keeps right to alter design or specification.
1.
Dear users:
Thank for your patronage in buying ROBAM gas hob. Please allow me to
express my sincere gratitude on this occassion. You are kindly suggested to
read this manual carefully before installation and operation of this product, and
keep it properly for future reference.
Our company is the professional manufacture of range hood, gas hob and other
home appliances.ROBAM gas hob adopts advanced mind, care holistic design
and optimize structure. Our gas hob has high heat efficiency and safe usage and
it’s recognized as eligible product by different testing instituations in the industry.
Picture for reference only.
1 2
Pan Stand
Copper Cover
Aluminum Base
Electrode Needle
Thermocouple
Burner
Copper Core
Decorative Plate
Gas Hob Gas Hob
Product Size(mm) 900×550 155×
Gas Style See the label
Rated Pressure See the label
Heating Load(kW) See the label
Gas Connector φ9.5mm special gas rubber gasket
(G1/2 inch special metal gasket)
Item Name Gas Hob
Item No. JZ(Y/T)-B594
Net Weight(kg) 26
5
Gas Burner
Air in flow Full
Panel Tempered Glass
lgnition Method Pulse
Installation Size(mm) 853×503
Flame Failure Safety Device Yes
All manuals and user guides at all-guidesbox.com

Attentions
1.Please check the gas source carefully whether gas source is accordant with the
label on the gas hob; Forbid to install or use wrong gas source;
2.The gas connector must use special rubber tube and replace it at least once every
year. It’s better to use the rubber tube with 1-1.5m. Don’t bend or squash rubber
tube. Forbid to use defective or aged rubber tube. Please pay attention to the
connection of rubber tube which must be fixed and locked by anchor ear to avoid
from fire or poisoning.
Warning: It must use special rubber tube to connect gas hob with gas source. (
For example, good quality of composited premier or butyronitrile rubber tube).
Forbid to use rubber tube made by normal rubber tube will react with ozone,
liquid oil, etc. It will make normal rubber tube aged or crack to leakage and
cause fire.
3.Don’t rotate fixed screw nut connecting with inlet gas pipe arbitrary. It must be
tested leakage after rotating the direction or inlet gas pipe. (Method:paint tenuous
and neuter cleaning solution on the connecting part, then open the valve. If there is
air bladder, please close the valve and tighten screw nut; Test it again until there is
nothing leakage).
4. If use anti-deciduous metal soft tube, the operator must install this product strictly
according to manual instructions on the package of anti-deciduous metal soft tube.(It
must be installed by appointed professional operator and test leakage. (The testing
3 4
5.The gas hob should be installed under good ventilated place, but don't allow to
ventilate by strong wind.
6.Don't allow to hide flame by baffle. Don't put flammable thing around gas hob.
And gas hob can't be used to dry wipe or clothes, etc.
7.Don't allow to touch pan standing, copper cover or cooktop during operation or
flame out right now because of still high temperature.
8.Don't beat cooktop strongly. Put on or put down gas hob lightly in order not to
destroy cooktop during moving or installation.
9.If find leakage of gas hob, turn off the gas immediately, open the window and
exchange the air. Prohibit exhasting air with fan, range hood or other appliances.
Don’t operate appliances knob avoiding from fume and fire, then contact our local after-
service office simultaneity.
10.The burner is on backfire when the gas hob whishes and its flame become weak,
turbid or other issue when using or igniting. Turn off the gas hob immediately. Check if
the burner cap, copper core are positioned correctly, cut down or turn off the damper,
and then reignite the gas hob a half minute later.
11.The ignition time should be less than 20 seconds every time avoiding from explode;
Please contact our local after-service office if failure ignition more than 5 times.
12.Forbid children to use gas hob avoiding from accident.
13.Don’t dissemble, maintain or repair the accessories by unprofessional person.
14.Make your head away from the burner when ignition. After operation, please turn off
gas valve or knob avoiding from accident.
15.During the operation, gas hob will become hot, please don’t touch hot part. Don’t put
metal tools on the cooktop, such as knife, fork or cap, because they maybe become hot.
Product Features
1.Fashionable appearance: design clings to fashionable trend and comply with modern
kitchen;
2.Top grade of parts and durable quality, more safe and effective;
3.Pluse ignition with flame failure safety device, easy to operate;
4.Full air in flow, supply air from cooktop, flexible air door and abundant burning;
1.Please deal with battery properly if use up, avoiding from pollution.
2.This product use environmental-protection package and it’s recyclable, please deal
with package carefully to reduce waste.
3.If gas hob can’t be used again, it may something useful materials, please assist to
dispose or make up.
Statement
Gas Hob Gas Hob
All manuals and user guides at all-guidesbox.com

5 6
Installation Instruction
1.The minimum distance between the cooktop and surrounding objects is 15cm, and it needs at
least 100cm net height on the top of cooktop. If installing range hood, please adjust space according
to the installation instruction of range hood. (Picture 1).
2.The cabinet to install built-in gas hob should have installation size with good ventilation, and the
square shouldn’t be less than 100 , or it may cause explode because of leakage.
3.If connected by special rubber tube, one side of rubber tube should connect gas valve, and another
side should connect intake. ( Notice: please take down the protective caps of the joint before
connecting).The special rubber tube should cover the red mark in the joint and lock it with anchor ear.
After testing leakage, the gas hob can be used.
4. Please install gas hob according to cut-out size, and put gas hob on the installation size properly.
5.Screw off φ9.5 soft pipe’s connector firstly, if users want to use G1/2 inch connector, then put
rubber gasket on connector place, screw nut, testing leakage. Don’t use gas hob if there is any gas
leakage.
6. For some models, the auxiliary pan is only workable for pan with φ100mm specification.
7.The gas hob with LPG must use eligible reducing pressure valve.
2
M
150mm 150mm
1000mm
picture2 picture3 picture4
Use Instruction
1.Check if the burner, copper cap, copper core or other parts are positioned
correctly, and confirm the knob button (Picture 2) position, then turn on the gas
valve.
2.Ignition:Press the control button then contrarotate 9 0 degree accordingly,
it's big fire. (Picture 3) , And the impulse sound will be heard, keep pressing
down the button 2-3 seconds, then loosen it. If fail to ignition, try it again.
Contrarotate more 90 degree, it’s small fire. (Picture 4).
Note:If it's the first to use gas hob or gas hob is not used for long time,
ignition maybe fail at the first time, please try it repeatly because there is
some air in the rubber tube.
Picture 1
Gas Hob Gas Hob
150mm
3.Extinguish: the burner will be extinguished when the knob turn to the position.
(Picture 2)
4.Adjust firepower: rotate knob according to accordant firepower instruction, then
you can get corresponding firepower.
5.Adjust air: in order to burn sufficiently, users can adjust air by inlet. Adjust air
door ( at the bottom of gas hob) clockwise or counterclockwise until the flame is
clear and blue. (like following picture).Please judge flame as following:
●Combustion well: the flame is cyanine without yellow flame or red fire,
meanwhile, the interior and exterior flame is clear.
●Air deficiency: the flame is stretched , the interior and exterior flame is
faintly, meanwhile, flame color is yellow or red.
●Air superabundance: the flame is left cap or shorter obviously, and the color is
cyan.
All manuals and user guides at all-guidesbox.com

1.Maintain gas hob surface: Please clean it by wiper with neutral detergent, then
clean it by wet wipe. Don’t use steel brush or other rigidity objects to clean it.
2. Please clean and dredge the fire hole with brush or steel needle to keep normal
usage and good combustion. Don’t wash gas hob by water directly.
3. Please check copper core, copper cap or base regularly, if found their position
improperly, please remove it to proper position, or it may cause danger.
Clean and Maintenance
7 8
fire hole in the copper core
Normal(combustion well)Yellow flame(air deficiency) Left flame(air superabundance)
fire hole in the outer
ring of copper burner
fire groove
fire hole in the inner
ring of copper burner
Adjustable flame damper plate
Adjustable flame damper plate
Intake
Picture for reference only.
Leakage of gas
hob(terrible smell)
Abnormal flame
or noise
Turn off knob
Connect well hose or replace it
Adjust air door
Clean blockage
Select right gas hob
Clean the water in the hose
Knob is still open
Hose is not connected
well or crack
Air door isn’t adjusted properly
Burner or flame is blocked
Gas source isn’t accordant
The pressure is not steady
and water in hose
General Troubleshooting
Problem
Ignition Failure
Ignition then
extinguish if
loosen hand
Resolution Method
Turn off the gas hob, then
open the gas valve
Exhaust the air by igniting
repeatedly
Straighten, clean or replace
the hose
clean
Adjust the distance to 3.5-4mm
between electrode needle and
connecting side
Install battery properly
or replace it
Put them to proper position
Adjust air door properly
Press knob 3-5 seconds after
ignition, then loosen hand
Reason
Gas valve is not open
Air in gas hose
Hose is twisted or blocked
Electrode needle is dirty or wet
Improper distance between
ignitor malfunction or the
electrode needle
Without battery, improper polarity
of battery or power insufficiency
Improper position for copper
core, cap or base
Air door opens too big
Knob don’t press properly
Attachment
1.Operation manual 2.Installation templet
3.One battery 4.2pcs of anchor ears (except of products with metal soft pipe)
Gas Hob Gas Hob
All manuals and user guides at all-guidesbox.com
all-guidesbox.com