Robam B396 Series User manual

Operation Manual
Gas Hob
JZ(Y/T)-B396
JZ(Y/T)-B486

Contents
Leakage of
gas hob
(terrible smell)
Abnormal
flame or noise
Turn off knob
Connect well hose or replace it
Adjust air door
Clean blockage
Select right gas hob
Clean the water in the hose
Knob is still open
Hose is not connected
well or crack
Air door isn’t adjusted properly
Burner or flame is blocked
Gas source isn’t accordant
The pressure is not steady
and water in hose
General Troubleshooting
Problem
Ignition
Failure
Ignition then
extinguish if
loosen hand
Resolution Method
Turn off the gas hob, then
open the gas valve
Exhaust the air by igniting
repeatedly
Straighten, clean or replace
the hose
clean
Adjust the distance to
3.5-4mm between electrode
needle and connecting side
Install battery properly
or replace it
Put them to proper position
Adjust air door properly
Press knob 3-5 seconds after
ignition, then loosen hand
Reason
Improper position for copper
core, cap or base
Knob don’t press properly
Hose is twisted or blocked
Air in gas hose
Gas valve is not open
Electrode needle is dirty or wet
Improper distance between
ignitor malfunction or the
electrode needle
Without battery, improper
polarity of battery or power
insufficiency
Air door opens too big
Attachment
1.Operation manual
2.Installation templet
3.One battery
4.2pcs of anchor ears
(except of products with metal soft pipe)
9
Product Overview
Product Structure
Product Parameter
Product Features
Attentions
Installation Instruction
Use Instruction
Clean and Maintenance
General Troubleshooting
Attachment
------------------------------------------
------------------------------------------
------------------------------------------ -
----------------------------------
----------------------------------------------------
--------------------------------------
----------------------------------
----------------------------------------------
---- ----------------------------------------------
-----------------------------------------
1
1
2
3
3
5
7
8
9
9

Product Overview
Product Structure
Product Paramater
Note:Parameters indicate for reference only.The exact detas should be
confirmed on the label on the gas hob.
2.The installation size of built-in gas hob should be confirmed by the
specification on the gas hob.
3.ROBAM keeps right to alter design or specification.
1.
Dear users:
Thank for your patronage in buying ROBAM gas hob. Please allow me
to express my sincere gratitude on this occassion. You are kindly
suggested to read this manual carefully before installation and operation of
this product, and keep it properly for future reference.
Our company is the professional manufacture of range hood, gas hob and
other home appliances.ROBAM gas hob adopts advanced mind, care holistic
design and optimize structure. Our gas hob has high heat efficiency and safe
usage and it’s recognized as eligible product by different testing instituations in
the industry.
Picture for reference only.
Pan Stand
Copper Core
Copper Cover
Aluminum Base
Electrode Needle
Thermocouple
Burner
Switch
Gas Hob Gas Hob
Product Size(mm) 860×525×154
Gas Style See the label
Rated Pressure See the label
Heating Load(kW) See the label
Gas Connector φ9.5mm special gas rubber gasket
(G1/2’ inch special metal gasket)
Item Name Gas Hob
Item No. JZ(Y/T)-B396
Net Weight(kg) 19.2
3
Gas Burner
Air in flow Full
Panel Tempered Glass
lgnition Method Pulse
Installation Size(mm) 753×478
Flame Failure Safety Device Yes
JZ(Y/T)-B486
700×525×154
17.3
4
655×478
1 2

Attentions
1.Please check the gas source carefully whether gas source is accordant
with the label on the gas hob; Forbid to install or use wrong gas source;
2.The gas connector must use special rubber tube and replace it at least
once every year. It’s better to use the rubber tube with 1-1.5m. Don’t bend
or squash rubber tube. Forbid to use defective or aged rubber tube. Please
pay attention to the connection of rubber tube which must be fixed and
locked by anchor ear to avoid from fire or poisoning.
Warning: It must use special rubber tube to connect gas hob with gas
source. ( For example, good quality of composited premier or butyronitrile
rubber tube). Forbid to use rubber tube made by normal rubber tube
will react with ozone, liquid oil, etc. It will make normal rubber tube
aged or crack to leakage and cause fire.
3.Don’t rotate fixed screw nut connecting with inlet gas pipe arbitrary. It
must be tested leakage after rotating the direction or inlet gas pipe.
(Method:paint tenuous and neuter cleaning solution on the connecting part,
then open the valve. If there is air bladder, please close the valve and
tighten screw nut; Test it again until there is nothing leakage).
4. If use anti-deciduous metal soft tube, the operator must install this
product strictly according to manual instructions on the package of anti-
deciduous metal soft tube.(It must be installed by appointed professional
operator and test leakage. (The testing method refer to above).
5.The gas hob should be installed under good ventilated place, but
don't allow to ventilate by strong wind.
6.Don't allow to hide flame by baffle. Don't put flammable thing
around gas hob. And gas hob can't be used to dry wipe or clothes,
etc.
7.Don't allow to touch pan standing, copper cover or cooktop during
operation or flame out right now because of still high temperature.
8.Don't beat cooktop strongly. Put on or put down gas hob lightly in
order not to destroy cooktop during moving or installation.
9.If find leakage of gas hob, turn off the gas immediately, open the
window and exchange the air. Prohibit exhasting air with fan, range
hood or other appliances. Don’t operate appliances knob avoiding from
fume and fire, then contact our local after-service office simultaneity.
10.The burner is on backfire when the gas hob whishes and its flame
become weak, turbid or other issue when using or igniting. Turn off the gas
hob immediately. Check if the burner cap, copper core are positioned
correctly, cut down or turn off the damper, and then reignite the gas hob a
half minute later.
11.The ignition time should be less than 20 seconds every time avoiding
from explode; Please contact our local after-service office if failure ignition
more than 5 times.
12.Forbid children to use gas hob avoiding from accident.
13.Don’t dissemble, maintain or repair the accessories by unprofessional
person.
Product Features
Gas Hob Gas Hob
1.Fashionable appearance: design clings to fashionable trend and comply
with modern kitchen;
2.Top grade of parts and durable quality, more safe and effective;
3.Pluse ignition with flame failure safety device, easy to operate;
4.Full air in flow, supply air from cooktop, flexible air door and abundant
burning;
34

Installation Instruction
1.The minimum distance between the cooktop and surrounding objects is
15cm, and it needs at least 100cm net height on the top of cooktop. If installing
range hood, please adjust space according to the installation instruction of
range hood. (Picture 1).
2.The cabinet to install built-in gas hob should have installation size with good
ventilation, and the square shouldn’t be less than 100 , or it may cause
explode because of leakage.
3.If connected by special rubber tube, one side of rubber tube should connect
gas valve, and another side should connect intake. ( Notice: please take down
the protective caps of the joint before connecting).The special rubber tube
should cover the red mark in the joint and lock it with anchor ear. After testing
leakage, the gas hob can be used.
2
M
Gas Hob Gas Hob
150mm 150mm
1000mm
Picture 1
150mm
1.Please deal with battery properly if use up, avoiding from pollution.
2.This product use environmental-protection package and it’s recyclable,
please deal with package carefully to reduce waste.
3.If gas hob can’t be used again, it may something useful materials, please
assist to dispose or make up.
Statement
4. Please install gas hob according to cut-out size, and put gas hob on the
installation size properly.
5.Screw off φ9.5 soft pipe’s connector firstly, if users want to use G1/2 inch
connector, then put rubber gasket on connector place, screw nut, testing
leakage. Don’t use gas hob if there is any gas leakage.
6. For some models, the auxiliary pan is only workable for pan with φ100mm
specification.
7.The gas hob with LPG must use eligible reducing pressure valve.
14.Make your head away from the burner when ignition. After operation,
please turn off gas valve or knob avoiding from accident.
15.During the operation, gas hob will become hot, please don’t touch hot
part. Don’t put metal tools on the cooktop, such as knife, fork or cap,
because they maybe become hot.
56

picture2 picture3 picture4
Use Instruction
1.Check if the burner, copper cap, copper core or other parts are
positioned correctly, and confirm the knob button (Picture 2) position, then
turn on the gas valve.
2.Ignition:Press the control button then contrarotate 90 degree
accordingly, it's big fire. (Picture 3), And the impulse sound will be
heard, keep pressing down the button 2-3 seconds, then loosen it. If fail to
ignition, try it again. Contrarotate more 90 degree, it’s small fire. (Picture 4).
Note:If it's the first to use gas hob or gas hob is not used for long time,
ignition maybe fail at the first time, please try it repeatly because there
is some air in the rubber tube.
3.Extinguish: the burner will be extinguished when the knob turn to the
position. (Picture 2)
4.Adjust firepower: rotate knob according to accordant firepower instruction,
then you can get corresponding firepower.
5.Adjust air: in order to burn sufficiently, users can adjust air by inlet. Adjust air
door ( at the bottom of gas hob) clockwise or counterclockwise until the flame
is clear and blue. (like following picture).Please judge flame as following:
●Combustion well: the flame is cyanine without yellow flame or red fire,
meanwhile, the interior and exterior flame is clear.
●Air deficiency: the flame is stretched , the interior and exterior flame is
faintly, meanwhile, flame color is yellow or red.
●Air superabundance: the flame is left cap or shorter obviously, and the color
is cyan.
In flow
Stop block for air door
Stop block for nature gas
Stop block for liquid propane gas
Stop block for manual gas
Air door
Air door
In flow
(Picture for reference only.)
Exclusive Fire-hole of Thermocouple
(Fire-holes are easy to be blocked,
users must clean them regularly)
Copper Fire-hole
Fire hole on copper cover
specific fire hole for
electrode needle
1.Maintain gas hob surface: Please clean it by wiper with neutral detergent,
then clean it by wet wipe. Don’t use steel brush or other rigidity objects to
clean it.
2. Please clean and dredge the fire hole with brush or steel needle to keep
normal usage and good combustion. Don’t wash gas hob by water directly.
3. Please check copper core, copper cap or base regularly, if found their
position improperly, please remove it to proper position, or it may cause
danger.
Clean and Maintenance
Normal
(combustion well)
Yellow flame
(air deficiency)
Left flame
(air superabundance)
78
Gas Hob Gas Hob