Robam CS46-W270 User manual

Combined Hob
Model: CS46-W270
B3 sec
3 sec
User Manual
Before operating this unit, please read the user manual completely and keep it.
If the manual is lost, you can send e-mail to ov[email protected], request for
an electronic manual.

2
Contents
Notice.......................................................................3
Product Overview and Parameters................................10
How to choose right cookware.....................................12
Use Instruction..........................................................14
Cooking Guidelines.....................................................21
Care and Cleaning......................................................23
Troubleshooting.........................................................25
Technical Specification................................................26
Installation instruction................................................26

3
Dear Users,
Let us take this opportunity to thanks for your
buying of ROBAM combined hob. We recommend
that before the installation and using. Please
read this manual and save it for your future
reference. ROBAM is a professional enterprise in
China’s household appliances and kitchenware.
It’s famous with advanced design, high efficiency,
saving energy and safety.
Safety Warnings
Your safety is important to us. Please read this
information before using your cooktop.
Installation
Electrical Shock Hazard
• Disconnect the appliance from the mains
electricity supply before carrying out any work
or maintenance on it.
• Connection to a good earth wiring system is
essential and mandatory.
• Alterations to the domestic wiring system must
only be made by a qualified electrician.
• Failure to follow this advice may result in
electrical shock or death.
Cut Hazard
• Take care - panel edges are sharp.

4
• Failure to use caution could result in injury or
cuts.
Important safety instructions
•This appliance is not intended for use by
persons (including children) with reduced
physical,sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
•Children should be supervised to ensure that
they do not play with the appliance.
•This appliance just for household use only.
•WARNING: If the surface is cracked, switch off
the appliance to avoid the possibility of electric
shock.
•During use the appliance becomes hot. Care
should be taken to avoid touching heating
elements inside the oven.
•Metallic objects such as knives, forks, spoons
and lids should not be placed on the hotplate
since they can get hot.
•The appliance must not be installed behind a
decorative door in order to avoid overheating.
•If the manual is lost, you can send e-mail to
[email protected], request for an
electronic manual.
• No combustible material or products should be

5
placed on this appliance at any time.
• Please make this information available to the
person responsible for installing the appliance
as it could reduce your installation costs.
• In order to avoid a hazard, this appliance must
be installed according to these instructions for
installation.
• This appliance is to be properly installed and
earthed only by a suitably qualified person.
• This appliance should be connected to a circuit
which incorporates an isolating switch
providing full disconnection from the power
supply.
• Failure to install the appliance correctly could
invalidate any warranty or liability claims.
Operation and maintenance
Electrical Shock Hazard
• Do not cook on a broken or cracked cooktop. If
the cooktop surface should break or crack, switch
the appliance off immediately at the mains power
supply (wall switch) and contact a qualified
technician.
• Switch the cooktop off at the wall before
cleaning or maintenance.
• Failure to follow this advice may result in
electrical shock or death.
Health Hazard

6
• This appliance complies with electromagnetic
safety standards.
Hot Surface Hazard
• During use, accessible parts of this appliance
will become hot enough to cause burns.
• Do not let your body, clothing or any item other
than suitable cookware contact the Induction
glass until the surface is cool.
• Metallic objects such as knives, forks, spoons
and lids should not be placed on the hob surface
since they can get hot
• Keep children away.
• Handles of saucepans may be hot to touch.
Check saucepan handles do not overhang other
cooking zones that are on. Keep handles out of
reach of children.
• Failure to follow this advice could result in
burns and scalds.
Cut Hazard
• The razor-sharp blade of a cooktop scraper is
exposed when the safety cover is retracted. Use
with extreme care and always store safely and
out of reach of children.
• Failure to use caution could result in injury or
cuts.
Important safety instructions
• Never leave the appliance unattended when in
use. Boilover causes smoking and greasy
spillovers that may ignite.
• Never use your appliance as a work or storage

7
surface.
• Never leave any objects or utensils on the
appliance.
• Never use your appliance for warming or
heating the room.
• After use, always turn off the cooking zones
and the cooktop as described in this manual (i.e.
by using the touch controls).
• Do not allow children to play with the appliance
or sit, stand, or climb on it.
• Do not store items of interest to children in
cabinets above the appliance. Children climbing
on the cooktop could be seriously injured.
• Do not leave children alone or unattended in
the area where the appliance is in use.
• Children or persons with a disability which
limits their ability to use the appliance should
have a responsible and competent person to
instruct them in its use. The instructor should be
satisfied that they can use the appliance without
danger to themselves or their surroundings.
• Do not repair or replace any part of the
appliance unless specifically recommended in the
manual. All other servicing should be done by a
qualified technician.
• Do not use a steam cleaner to clean your
cooktop.
• Do not place or drop heavy objects on your

8
cooktop.
• Do not stand on your cooktop.
• Do not use pans with jagged edges or drag pans
across the Induction glass surface as this can
scratch the glass.
• Do not use scourers or any other harsh
abrasive cleaning agents to clean your cooktop,
as these can scratch the Induction glass.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
•This appliance is intended to be used in
household and similar applications such as:
-staff kitchen areas in shops, offices and other
working environments; -farm houses; -by
clients in hotels, motels and other residential
type environment; -bed and breakfast type
environments.
•WARNING: The appliance and its accessible
parts become hot during use.
Care should be taken to avoid touching heating
elements.
Children less than 8 years of age shall be kept
away unless continuously supervised.
•This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have
been given supervision or instruction concerning

9
use of the appliance in a safe way and
understand the hazards involved.
•Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
•WARNING: Unattended cooking on a hob with
fat or oil can be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but
switch off the appliance and then cover flame e.g.
with a lid or a fire blanket.
•WARNING: Danger of fire: do not store items on
the cooking surfaces.
• Warning: If the surface is cracked, switch off
the appliance to avoid the possibility of electric
shock, for hob surfaces of glass-ceramic or
similar material which protect live parts
•A steam cleaner is not to be used.
•The appliance is not intended to be operated by
means of an external timer or separate
remote-control system.
Congratulations on the purchase of your new Hob.
We recommend that you spend some time to read this Instruction / Installation
Manual in order to fully understand how to install correctly and operate it.
For installation, please read the installation section.
Read all the safety instructions carefully before use and keep this Instruction /
Installation Manual for future reference.

10
Product Overview and Parameters
Top View
Control Panel
1. 2200(1000) W zone (230/138mm)
2. 2000/2400 W zone (210mm)
3. Glass plate
4. Control panel
1. Heating zone selection controls
2. Timer control
3. Power/Timer regulating key+
4. Keylock control
5. ON/OFF control
6. Dual zone+Boost control
7. Stop&Go control
8.Keep warm control

11
A Word on Ceramic Cooking
•Ceramic hob cooking is based on infrared heating technology, the nickel chrome wires of
the hob would radiate heat and give out the infrared to warm up the food. The ceramic
cooker hob centers on customers and adopts personalized design. The hob has safe and
reliable performances, making your life comfortable and enabling to fully enjoy the pleasure
from life.
•Ceramic hobs do not pick pot. You can use any kind of pot or pan, such as copper pots,
wok, stainless steel, cookware, glass pot, casserole and ceramic pot.
A Word on Induction Cooking
Induction cooking is a safe, advanced, efficient, and economical cooking technology. It
works by electromagnetic vibrations generating heat directly in the pan, rather than indirectly
through heating the glass surface. The glass becomes hot only because the pan eventually
warms it up.
Before using your New Induction Hob
• Read this guide, taking special note of the ‘Safety Warnings’ section.
• Remove any protective film that may still be on your Induction hob.
Using the Touch Controls
• The controls respond to touch, so you don’t need to apply any pressure.
• Use the ball of your finger, not its tip.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents

12
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a
cloth) covering them. Even a thin film of water may make the controls difficult to operate.
How to choose right cookware
• Only use cookware with a base suitable for induction
cooking. Look for the induction symbol on the
packaging or on the bottom of the pan.
• You can check whether your cookware is suitable by carrying out
a magnet test. Move a magnet towards the base of the pan. If it
is attracted, the pan is suitable for induction.
• If you do not have a magnet:
1. Put some water in the pan you want to check.
2. If does not flash in the display and the water is heating, the pan is suitable.
• Cookware made from the following materials is not suitable: pure stainless steel,
aluminium or
copper without a magnetic base, glass, wood, porcelain, ceramic, and earthenware.
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is the same
size as the cooking zone. Use pans whose diameter is as large as the graphic of the zone
selected.Using a pot a slightly wider energy will be used at its maximum efficiency.If you use
smaller pot efficiency could be less than expected.Pot less than 140 mm could be
undetected by the hob. Always centre your pan on the cooking zone.

13
Always lift pans off the Induction hob – do not slide, or they may scratch the glass.

14
Use Instruction
To start cooking
1. Touch the ON/OFF control.
• After power on, the buzzer beeps once, all displays show “–“ or “– –“, indicating
that the induction hob has entered the state of standby mode.
2. Put a suitable pan on the cooking zone that you hope to use.
• Make sure the bottom of the pan and the surface of the cooking zone
are clean and dry.
3. Touching the heating zone selection control, and the indicator next to the key will flash.
4. Set a power level by touching the “-”, “+”, or slide along the “—”control,
or just touch any point of the “—”.
When you have finished cooking
1. Turn the whole cooktop off by touching the ON/OFF control.
2. Beware of hot surfaces
• “H” showing means the cooking zone is hot to touch. It will disappear

15
when the surface has cooled down to a safe temperature. It can also be used as an energy
saving function if you want to heat further pans, use the hotplate that is still hot.
Using the Dual Zone of the left zone
1. Activate dual zone by pressing
Select the heat setting zone, then press the dual ring button to active the dual zone.
2.Repeat if you want to deactive the function.
Using the Boost Function of the right zone
Boost function is the function that one zone rising to a larger power in one second and
lasting for 5 minutes. Then you can get a more powerful and faster cooking.
Using the Boost to get larger power
1.The left zone has no boost function.
Touch the right heating zone selection button, an indicator next
to the key will flash.
2.Touch the dual zone button and hold for 3 seconds, the heating zone will begin to work at
boost mode.
The power display will show “P” to indicate that the zone is boosting.
3.The boost power will last for 5 minutes and then the zone
will go back to the power stage which was set before boost.

16
4.If you want to cancel the boost during these 5 minutes, touch the heating zone selection
button, an indicator next to the key will flash. And then touch the dual zone button for 3 sec
to deactive the boost function. The heating zone will go back to the power stage which was
set before boost.
Using the Pause function- STOP+GO
Pause function can be used at any time during cooking. It allows to stop using and come
back to it.
1. Make sure the cook zone is working.
2. Touch the button STOP+GO, the cooking zone indicator will show “ll”.
And then the operation of the hob will be deactivate within the scope of all cooking zones,
except the STOP+GO, on/off and lock keys.
3. To cancel the pause status, touch the button STOP+GO, then the cooking zone will go
back to the power stage which you set before.
Using the Keep warm function
Keep warm function is suitable for keeping food warm.
Using the Keep warm to get stable temperature

17
1. Touch the heating zone selection button that you wish to use keep warm, an
indicator next to the key will flash.
2. Touch the button ‘-’ and hold 3s in the meantime, the cooking
zone indicator will display “A”.
3. If you want to cancel the keep warm, touch the button ‘-’and hold 3s in the meantime. The
heating zone will go back to “0” power stage.
Locking the Controls
• You can lock the controls to prevent unintended use (for example children accidentally
turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are disabled.
To lock the controls
Touch the key lock control
the timer indicator will show “ Lo “
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the key lock control
for a while.
3. You can now start using your ceramic hob.
When the hob is in the lock mode,all the controls are disable except the ON/OFF ,you can
always turn the induction hob off with the ON/OFF control in an emergency,but you
shall unlock the hob first in the next operation

18
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the hob. When an
excessive temperature is monitored, the hob will stop operation automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g. aluminium), or some other small item
(e.g. knife, fork, key) has been left on the hob, the hob automatically go on to standby in 1
minute. The fan will keep cooling down the induction hob for further 1 minute.
Residual Heat Warning
When the hob has been operating for some time, there will be some residual heat. The letter
“H” appears to warn you to keep away from it.
Auto Shutdown Protection
Another safety feature of the hob is auto shut down. This occurs whenever you forget to
switch off a cooking zone. The default shutdown times are shown in
the table below:
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2

19
Using the Timer
• You can set the timer up to 99 minutes.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1. Touch the heating zone selection control that you want to set the timer for.
(e.g. zone 1#)
2. Touch timer control, the minder indicator will start flashing and “00”
will show in the timer display.
3. Set the time by touching the “-“ or “+” control.
Hint: Touch the “-“ or “+” control once will decrease or increase by 1 minute.
Touch and hold the ”-“ or “+” control will decrease or increase by 10 minutes.
4. Touch the “-“ control, if the “00” will show in the minute display, the timer is cancelled.
5. When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator flash for 5
seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
6. When cooking timer expires, the corresponding cooking zone will be
switch off automatically.

20
Other cooking zone will keep operating if they are turned on previously.
Setting the timer to turn more than one cooking zone off
1. If more than one heating zone use this function, the timer indicator will show the lowest
time.
(e.g. zone 1# setting time of 3 minutes, zone 2# setting time of 6 minutes, the timer
indicator shows “3”.)
NOTE: The red dot next to power level indicator will flash.
(set to 3 minutes)
(set to 6 minutes)
2. When cooking timer expires, the corresponding cooking zone will be
switch off automatically.
NOTE: If you want to change the time after the timer is set, you have to start from step 1.