Robam JZY-ZB61H70 User manual

JZY-ZB61H70 JZY-ZB91H71 JZY-ZB91H72 JZY-ZG81H60
JZT-ZB61H70 JZT-ZB91H71 JZT-ZB91H72 JZT-ZG81H60

11
13
13
14
15
16
17

1

2

JZY(T)-ZB/ZG*****series
3

4
(tolerance:±3mm)
JZY-ZB91H72
JZY-ZG81H60
JZY-ZB91H71 JZT-ZB91H71 JZT-ZB61H70 JZY-ZB61H70
JZT-ZG81H60
JZT -ZB91H72
560
480
480
480
605
900
900
860
520

5

6

7

8
Before you begin, turn off the gas and electricity supply.

9

10
Connective Function
When the cooker hood is power on, press down “light and air flow slider leftmost”control
2seconds (to start connection pairing).
The buzzer beeps once to enter the pairing mode,the icons of light and air flow slider leftmost control blink
slowly once per second. After connected,the icons will be steady on 3seconds then off.If failed to connect
within 3 minutes or failed to pair, the icons would be displayed off to close the pairing process.
During the pairing process or after connected, press down the “light and air volume slider leftmost”control
,then can cancel the pairing or disconnect the connection.
After connected,ignite the burner of gas hob: If cooker hood was not working or less than HIGH speed flow,it
would be connective and start HIGH speed flow; Switch off the burners of gas hob(all the burners are off fire):
The cooker hood which is still on working will be connective and delay off 1 minute if without any operation
within this time,otherwise will be into off mode directly.
Note:
The connective function can be started only when the cooker hood is power on,then cooker hood and gas
hob can be used together.
If the connection failed, please unplug the power supply, and restart the pairing after 5 minutes or contact
with after sale service.

11

12

13

JZY-ZB61H70
JZY-ZB91H72
JZY-ZB91H71
JZT-ZB91H71
JZT-ZB91H72
JZT-ZB61H70
JZY-ZG81H60
JZT-ZG81H60
14

15

16

17

28
26
20
20
18
30
30
31
32
33
34