Robam Vigour Series User manual

User Manual
Edition: A/0
Publication Date: July, 16, 2021
If the manual is lost, you can send e-mail to [email protected],
request for an electronic manual.
Gas Hob
JZ(Y/T)-B272

Contents
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
---------------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-----------------------------------
-----------------------------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1
3
5
6
6
7
8
10
12
13
13
Notice Items
Important Safety Information
Product Overview
Product Structure
Product Features
Product Parameter
Installation Instruction
Use Instruction
Clean and Maintenance
General Troubleshooting
Attachment
Problem
Ignition
Failure
The burner is
not work
when loosen
the knob
Gas leakage
(gas smell)
Possible Reason
Gas Volve is not open
Air exists in gas pipe
The rubber tube is
twisted or blocked
Electrode needle is dirty
lgnitor malfunction or the electrode
needle in wrong position
Without battery,put battery
oppositely or power insufficiency.
The copper core,copper cover,
burner is in wrong position
Time to press On/Off switch
is too short.
Switch is not closed completely.
The rubber tube is not
connected or cracked.
Burner is blocked
The gas used here is not consonant
with the required in the nameplate.
Gas pressure is unstable,
water in the rubber tube.
Measurement
Turn off the control switch
Then turn on the gas valve
Exhaust the air by igniting repeatedly
Straighten,clean or replaced
the rubber tube
Clean clear
Adjust the electrode needle to burner,
keep the distance3.5-4mm
Install the battery collectly
or replace the battery
Install the copper core,copper
cover,burner in right position
Keep the switch down 3-5
seconds then loosen
Turn off the switch
Connect rubber tube or replace it
Choose the cooktop properly
Get rid of water in the rubber tube
Burning
abnormal
or sounding
noise
Clear away the block
General Troubleshooting
Attachment
1. One copy of the Operation Manual
2. Two pieces of anchor ear (except for metal soft pipe)
3. One copy of Installation templet
4. One piece of battery in the packing foam
13
Gas Hob

Notice Items
1. Please make sure the source of gas is in line with that noted
on nameplate before your installation of the product, otherwise
it is strictly prohibited to use.
2. The minimum distance between the gas stove and gas
resource should be no less than 1 meter and connecting tube
should be the matched special gas tube, which should be
replaced once a year at a regular limitation. The regular length
of the tube should be 1-1.5 meter as preferred. It is highly
required that the tube should be avoided from pressing, heavy
bending or aging. The joining point should be carefully checked
to avoid any possibility of leaking and any potential damage
from the leaking.
4. The fixing metal joint should be installed strictly according to
the operation manual, which lays in the “package of the fixing
metal joint” or installed by the professional staff, if the tube is
connected by the fixing metal joint. The test of leaking should
be done before use. (The way of leaking test above is for your
reference ).
5. The gas stove should be installed on the place of well-
ventilated, but should be avoided from the strong wind.
6. Do not try to cover the flame on the gas stove, or put
anything tinder around. Besides the gas stove cannot be used
to for drying towel or clothes, etc.
7. Do not have the immediate touch on the flame-around area,
such as work stand, burner or cooktop after the use of the gas
stove.
8. Do not try to beat the cooktop, and the special attention
should be paid to keeping the gas stove in good condition
during the transport and installation.
9. Once any leaking tested, the valve should be turned off
immediately and the window should be open to keep ventilated.
The electric fan or range hood or any other electric appliances
are prohibited to use, and keep the fire away. Meanwhile,
please contact professional staff.
10. If there were any abnormal sound such as whir heard, or the
color of flame turned from dark to light or turned muddy, the
backfire from the burner might be happened. Please turn off the
switch, and check whether the burner and copper core are well-
positioned. Turn on the switch in half a minute after the check.
12
Gas Hob Gas Hob
3. Leave the valve of the gas inflow tube under normal situation.
The leaking test should be done after any abnormal change of
the valve. (Put the low-concentrated cleaning solution to the
joint point and then turn on the valve to check whether any air
bubble appears, if there were any air bubble, the valve should
be turned off immediately and fix the problem. It cannot be used
until the problem is completely solved).
WARNING: THE GAS STOVE SHOULD BE ONLY
CONNECTED BY THE QUALIFIED SPECIAL TUBE(e.g. the
tube made of UV-PSA, Buna-N rubber ). IT IS HIGHLY
PROHIBITED FROM USING NORMAL RUBBER TUBE, FOR
THE POSSIBLE CHEMICAL REACTION MAY HAPPEN WHEN
THE NORMAL RUBBER TUBE MEET OZONE/LIQUID OIL,
WHICH WILL POSSIBLY CAUSE THE DAMAGE OF THE
TUBE AND THE RELATED POTENTIAL ACCIDENTS.

Important Safety Information
General
Information
THIS PRODUCT BELONGS TO THE EMBEDDED HOUSEHOLD GAS
STOVE, YOUR SAFETY IS OF THE UTMOST IMPORTANCE TO
ROBAM APPLIANCES CO.,LTD.PLEASE MAKE SURE THAT YOU
READ THIS INSTRUCTION BOOKLET BEFORE ATTEMPTING TO
INSTALL OR USE THE APPLIANCE. IF YOU ARE UNSURE OF ANY
OF THE INFORMATION CONTAINED IN THIS BOOKLET, PLEASE
CONTACT THE ROBAM APPLIANCES CO.,LTD.
Gas Hob Gas Hob
34
11. Each time of turn-on the switch should be no more than 20
seconds to avoid from deflagrating. If the switch cannot be
turned on within five times, please contact the service
immediately.
12. The children are prohibited to use the gas stove in the case
of safety concern.
13. The installation and any maintenance should be taken only
by the professionals.
14. Be sure to keep your head away from the burner while the
operation of turn-on gas stove. Please turn off the valve of gas
and switch of gas stove after the use to avoid from any possible
accident.
15. Be sure to keep any heat conductor such as metal knife,
fork or cover away from the heat.
◆This appliance is designed for domestic household use and for the cooking and
frying of domestic foodstuffs.
◆IMPORTANT: The adjacent furniture and all materials used in the installation must
be able to withstand a minimum temperature of 85°C above the ambient
temperature of the room it is located in, whilst in use.
◆Certain types of vinyl or laminate kitchen furniture are particularly prone to heat
damage or discolouration at temperatures below the guidelines given above.
◆Any damage caused by theappliance being installed in contravention of this
temperature limit, will be the liability of the owner.
◆Your new appliance is guaranteed against electrical or mechanical defects, subject
to certain exclusio that are noted in ROBAM APPLIANCES CO.,LTD.conditions of
guarantee. The foregoing does not affect your statutory rights.
◆The use of this appliance for any other purpose or in any other environment
without the express agreement of ROBAM APPLIANCES CO.,LTD.will invalidate any
warranty or liability claim.
◆You should not use this appliance to store items on or as a work surface.
◆Do Not Modify This appliance.
◆You should not store or place flammable or highly flammable liquids/materials on
top of or near the appliance. Items made from aluminium, plastic or plastic film should
also be kept away from the appliance, as they may fuse to the surface.
◆Repairs may only be carried out by ROBAM APPLIANCES CO.,LTD.service
engineers or their authorized service agent.
General Safety
◆Installation must be carried out by an AUTHORISED PERSON in accordance with
the regulation in force.
◆Care should be taken to ensure that the units and work surfaces that you build the
appliance into, meet with The relevant standards.
◆This appliance is not intended for use by persons(including children)with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
◆DO NOT USE OR STORE FLAMMABLE MATERIALS IN THE APPLIANCE
STORAGE DRAWER OR NEAR THIS APPLIANCE.
◆DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT
IS IN OPERATION.
◆DO NOT MODIFY THIS APPLIANCE.
◆DO NOT USE THIS APPLIANCE AS A SPACE HEATER.
Child Safety
◆ROBAM APPLIANCES CO.,LTD.strongly recommend that babies and young
children are prevented from being near to the appliance and not allowed to touch the
appliance at any time. During and after use, all surfaces will be hot.
◆If it is necessary for younger family members to be in the kitchen, please ensure
that they are kept under. close supervision at all times.
◆Older children should only be allowed to utilise the appliance when supervised.
◆Children should be supervised to ensure that they do not play with the appliance.
During Use
◆Any film or stickers that are present on the hob surface when it is delivered should
be removed before use.
◆These instructions are only valid if the country symbol appears on the appliance.If
the symbol does not appear on the appliance, it is necessary to refer to the technical
instructions, which will provide the necessary instructions concerning modification of
the appliance to the conditions of use of the country.

Gas Hob Gas Hob
56
Product Overview
Dear Users:
Thank for your buying our gas hob. This gas hob adopt advanced technology, fashion
design and optimistic structure. This gas hob has high heat efficiency and safe
operation, too.
Please read this operation manual carefully before installation or operation of this
product. Meanwhile, please keep it properly for future reference.
◆Prior to installation, ensure that the local distribution conditions (nature of the gas
and gas pressure) and the adjustment of the appliance are compatible.
◆The adjustment conditions fro this appliance are stated on the label (or data plate).
◆This appliance is not connected to a combustion product evacuation device.It shall
be installed and connected in accordance with current installation regulations.
Particular attention shall be given to the relevant requirements regarding ventilation.
◆CAUTION: The use of a gas cooking appliance results in the production of heat
and moisture in the room in which it is installed. Ensure the kitchen is well ventilated,
keep natural ventilation holes open or install a mechanical ventilation
device(mechanical extractor hood).
◆CAUTION: This appliance is for cooking purposes only. It must not be used for
other purposes, for example room heating.
◆Prolonged intensive use of the appliance may call for additional ventilation, for
example opening of a window or more effective ventilation, for example increasing
the level of mechanical ventilation where present.
◆Care should be used when utilising the appliance, otherwise there is a risk of burns
being caused.
◆You should not allow the electrical connection cables to come into contact with the
hob surface when it is hot or any hot cookware.
◆If fat and oil overheats, then it can ignite extremely quickly. For this reason, when
cooking with fat and oil the appliance should not be left unattended.
◆Make sure that all of the cooking zones are switched off after use.
CAUTION: “In case of hotplate glass breakage:
- shut immediately off all burners and any electrical heating element and
isolate the appliance from the power supply
- do not touch the appliance surface
- do not use the appliance.”
Product Features
1. Fashionable design: The design of model and structure comply with fashion and
adapt to modern kitchen.
2. Excellent quality: Top quality of accessories with trustable quality, long life
expectancy.
3. Electronic pulse with flame failure safety device on each burner and high thermal
efficiency.
4. Full air in flow: Built-in structure with full air in flow , cooktop supplyment air, air
valve adjust flexibly, burn completely and easy to install.
5. Anti-explosive enamel glass, use safely and easy to clean.
6. Pan Diameter limits
Wok burner (5.0kW): 220mm ~ 300mm
Remark: It's prehibited to use a vessel that overlap its edges.
Using inappropriate hob guards can cause accidents.
Product Structure
(This picture is only for your reference. There are series of models, we don’t list all
of them one by one .)

Gas Hob Gas Hob
Product Parameter
78
Note:
1. Parameters indicate for reference only. The exact datas should be confirmed on
the nameplate on the gas hob.
2. The installation size of built-in gas hob should be confirmed by the specification on
the templet in the carton.
3. We keep right to alter design or specification.
Installation Instruction
1. When the Gas Hob is installed, the distance from the combustibles is not less than
15cm, and the distance between the Gas Hob and noncombustible should be not
less than 7 cm; The Gas Hob and the above object should have a height of more
than 100cm, If you want to install a Rang Hood, the height of 65-75cm from the Gas
Hob is suitable. (This space is set up according to the installation requirements of the
Range Hood).
2. The kitchen cabinet for built-in gas stove should be specially designed for the
safety concern. The ventilated borehole should be suitable for the safety requirement
2
and the size should be no less than 100 cm .
3. When the special gas tube is used, one side of the tube should be connected with
the gas valve while the other side connected with the inflow side of gas stove. Please
take off the cover on the connection point and put the tube to cover the red-mark
point, and tighten it with the anchor ear. Be sure that the leaking test should be taken
before use.
4. The size of the borehole should be taken according to the requirement, and put the
built-in gas stove to match the borehole.
5. If the G1/2”inch connector is used, please make sure to put the rubber gasket
inside the connector and the leaking test should be taken before use.
6. The qualified reduction valve should be used when the LPG is used as the source
of the gas.
Requirement for hole size
Item Name
Model
Gas Category, type
Gas inlet connection
Product Size(mm)
Hob Element Number
Air in flow
Panel
Ignition Method
Flame failure safety
device
Gas Hob
780×450×130
12.4
2
Full
Tempered Glass
650×350×R10
Electronic Pulse
Yes
28-30 mbar
Net Weight(kg)
Size Of Opennings(mm)
Total: 10.0kW (728g/h)
Left burner: 5.0kW (364g/h)
Right burner: 5.0 kW (364g/h)
I3B/P(30), G30, G31 or their mixtures
Injector Dia. (mm) 0.95 & 0.45
JZY-B272
φ9.5mm special gas rubber gasket
(G1/2 inch special metal gasket)
”
Rated gas pressure
Nominal heat input
Hoop
Red thread
Hose connector
Rubber hose
Gas inlet of stove
Rubber washer
Metal corrugated pipe
Rubber washer
Front valve
Rubber hose diagram A schematic diagram of a metal bellows

Gas Hob Gas Hob
910
Bottom functional location diagram
Use Instruction
1. Be sure the copper core, copper cover, copper base and pan stand in right
position. Check the switch first before turn on the valve of the gas. (Pic1)
2. IGNITION METHOD: Push the switch and turn to 90 degrees anti-clockwise for the
strongest flame, (Pic2) meanwhile the poop sound of pulse firing can be heard. The
full push should be taken for 3-5 seconds till the flame comes out. Otherwise, the
same operation above should be retaken. In addition, push the switch and turn to 90
degrees anti-clockwise again is the small flame. (Pic3)
Remark: The device shall not be operated for more than 15 s. If after 15 s the burner
has not lit, stop operating the device and open the compartment, door and/or wait at
least 1 min before attempting a further ignition of the burner.
Battery installation position
The position of the air inlet of the stove
360
370
380
390
400
710
700
690
680
670
660
400
390
380
370
360
710
700
690
680
670
660
7. The range of openings that this cooker can adapt to is:
Length 650mm-710mm, width 350mm-400mm;
For replacement installation, the installation method is as follows:
①First, the installer measures the actual size of the user's home opening;
②Wipe the chassis scale area with a clean cloth, and then paste the limit bars (four)
to the corresponding ones as shown in the figure below
Position, the outer edge is aligned with the corresponding tick line. After pasting,
press the limit bar hard to make it tightly fit (by company professionals
Installation).
③Put the product with good limit strips into the opening, pay attention to the need
for leveling the cooker after placing, and ensure that each limit strip is embedded in
the opening.
It is recommended to use the product after 24 hours to ensure that the adhesive is
cured.
Cooker opening adjustment scale (length) Cooker opening adjustment scale (width)
Take the measured opening size 700 × 400 as an example
The outer edge of the
limit bar is aligned with
the scale line 700
Limit bar outer
edge alignment
scale line 400
Note: Both sides are pasted
in the same way

1. Maintain gas hob surface: Please clean the surface with wet and neutral detergent
cloth, and then clean with dry cloth, Don’t use steel brush or other rigidity objects.
2. Check if the copper cover, copper core and ornamental ring are shift or biasing,
and correct them at the right position in time.
3. Please deal with used battery properly avoiding pollution.
4. This product use environmental and recyclable package, please deal with those
packages properly in order to protect environment and reduce waste.
5. If maintenance confirms this product can’t be used again, please deal with
recyclable materials properly.
6. In order to keep ordinary usage and good combustion regime, operator must clean
and dredge the fire hole with brush and steel needle regularly to prevent fire from
turning back and damage gas hob. Don’t bath this product.
Flame port on internal cap
Inner-ring flame port of external cap
Flame port on external cap
Clean and Maintenance
Gas Hob Gas Hob
11 12
Normal
(Full Combustion)
Yellow Flame
(Air deficiency)
Floating Flame
(Air superabundant)
Combustion well: the flame takes on cyanine, no yellow flame or red fire, the
interior and exterior flame is clear.
Air deficiency: the flame is stretched and takes on yellow or red, the interior and
exterior flame is faintly.
Air superabundance: the flame is unstable, about to leave the fire cover or flame
becomes short obviously (sometimes will occur backfire when using manufactured
gas), and color of flame appear cyan.
REMARKS: The first ignition or that of the first reuse of the gas stove may not work
immediately, because there is air in the tube, it needs to be operated repeatedly.
3. SWITCH-OFF: Turn the switch to the position clockwise (Pic1) and the fire will be
switched off.
4. FIREPOWER CONTROL: Operate according to the instruction mark.
swtich off position strongest
flame position weakest flame position
Pic1 Pic2 Pic3
5. Airflow control: Please adjust the inlet airflow, to make the gas fully fired.
Adjust the inlet spot nail or plate (at the bottom of hobs), by clockwise or anti
clockwise, till the flame become stable and blued colored (as following picture). Here
is the way to differ the combustion states:
(The figure is provided for reference
only and subject to the actual product.)
This manual suits for next models
2
Table of contents
Other Robam Hob manuals

Robam
Robam JZY-ZB61H70 User manual

Robam
Robam JZ(Y/T)-G413 User manual

Robam
Robam JZY-B394 User manual

Robam
Robam JZY-B398 User manual

Robam
Robam JZY-B928 User manual

Robam
Robam JZY-G370 User manual

Robam
Robam JZY-B920 User manual

Robam
Robam HS44-W211 User manual

Robam
Robam B396 Series User manual

Robam
Robam JZY-B594 User manual
Popular Hob manuals by other brands

Gaggenau
Gaggenau VI414115 User manual and installation instructions

Siemens
Siemens EH801FFB1E instructions

CNA Group
CNA Group NODOR V2170SLBK Operating and maintenance instructions

ROSIERES
ROSIERES RID33 Instructions for use and installation

Smeg
Smeg Built-in Electric Hob S135EB.1 Use, installation and maintenance instructions

AEG
AEG HKP67420FB user manual