Roberts CR9961 User manual

CR9961
3BandSingleAlarm
ClockRadio
Please read this manual before use
ROBERTS
SoundforGenerations

2
Contents ............................................................................2
Controls ..........................................................................3-4
Switching on and setting the time ....................................5
Listening to the radio ........................................................6
Setting alarm time.............................................................7
Checking alarm time.........................................................7
Setting alarm to wake to buzzer ......................................8
Setting alarm to wake to radio..........................................8
Snooze control ..................................................................9
Sleep timer ........................................................................9
Headphones ....................................................................10
Specifications..................................................................11
Circuit features ................................................................ 11
General ............................................................................12
Notes ..........................................................................13-14
Guarantee........................................................................ 15
Contents

Controls
3
1. Hour button
2. Minutebutton
3. Sleep button
1
2
4
5
6
4. Timebutton
5. Alarm off button
6. Snooze button
3
(Top)

4
Controls
7. Function switch
8. Tuning control
9. Wave Band selector
10. Volume control
11. Back-up battery compartment
7 8 9 10
(Left) (Right)
11

If you need any further advice, please call our Technical Helpline on :-
02087580338(Mon-Fri)
Switching on and setting the time
Before using your clock radio you must first set the correct time.
5
1. Placetheunitonaflat surface. Plugthemainsleadintoawallsocket
and switch on the wall socket.
2. The clock display will flash 12:00. Ensure that the Function switch
is set to the 'Off' position.
3. Press and hold down the Time button.
4. Whilst holding down the Time button press the Hour or Minute
buttons to set the correct time. Release the buttons when the
correct time is reached. The clock uses a 12 hour display with a PM
indicator. Ensure that the correct 12 hour cycle is selected.
23
4 4

6
Listening to the Radio
1. Switch on your clock radio by sliding the Function switch to the
'On' position. The LED dial pointer will light up indicating that the
radio is switched on
2. Slide the Waveband switch to the required waveband.
3. Tune in to the desired station by rotating the Tuning control. The
station frequency is indicated in the dial scale.
The Wire aerial located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
ForMWandLWreceptionthereisabuiltinferriteaerial.Rotateyour
clock radio to the position giving best reception.
4. Adjust the volume by rotating the Volume control.
5. The radio can be switched off by sliding the Function switch to the
'Off' position.
1
45
23

If you need any further advice, please call our Technical Helpline on :-
02087580338(Mon-Fri) 7
Setting alarm time
The alarm can be set to wake you by either the buzzer or the radio.
1. Press and hold down the ALARM/OFF button.
2. Whilst holding down the ALARM/OFF button press the Hour or
Minute button to set the correct time. Release the buttons when
the correct time is reached. The clock uses a 12 hour display with
a PM indicator. Ensure that the correct 12 hour cycle is selected.
Checking alarm time
1. To check the Alarm time, press the ALARM/OFF button. The Alarm
time will appear in the display.
12
2
1

Setting the alarm to wake to buzzer
1. Set the alarm time as previously described. Set the function switch
to the 'Buzz' position. The Alarm indicator will light.
The buzzer alarm will sound every day at the preset time for 1 hour
and 59 minutes. To turn off the alarm until the next day press the
ALARM/OFF button.To turn off the alarm permanently set the
Function switch to the 'Off' position.
8
1
1
Setting the alarm to wake to radio
1. Set the alarm time as previously described. Set the function switch
to the 'Auto' position. The Alarm indicator will light.
Ensure that the volume is set to the correct level and the desired
station is tuned in
The radio alarm will sound every day at the preset time for 1 hour
and 59 minutes. To turn off the alarm until the next day press the
ALARM/OFF button.To turn off the alarm permanently set the
Function switch to the 'Off' position.

If you need any further advice, please call our Technical Helpline on :-
02087580338(Mon-Fri)
3
5
44
9
Snooze control
1. The buzzer or radio alarm can be silenced for 9 minutes by pressing
the Snooze button. This sequence can be repeated several times
during the alarm period.
Sleep timer
1. The radio can be set to switch off automatically after a preset time
has elapsed.
2. Press and release the Sleep button, 59 minutes is displayed. The
radio will be on for 59 minutes then turn off automatically.
3. For a shorter sleep time hold down the Sleep button and the
Minute button, the display will count from 59 to 0. Release the
buttons when the desired sleep time is reached.
4. The sleep time can be extended to 1 hour and 59 minutes by holding
down the Sleep button and pressing the Hour button once.
5. To set the sleep time for duration between 1 hour 59 minutes and
1 hour, hold down the Sleep button and the Minute button, the
display will count from 1 hour 59 minutes to 1 hour. Release the
buttons when the desired sleep time is reached.
6. To end the sleep function prematurely, press the Snooze button.
1
3
2
6
5

Headphones
1. A Headphone Socket (3.5mm) located on the back of the unit is
provided for use with either headphones or an earpiece. Inserting
a plug automatically mutes the internal loudspeaker.
10
1