Rocket Fish InvisiShell RF-GWU1301 User manual

QUICK SETUP GUIDE
InvisiShell™ |RF-GWU1301
Installing your InvisiShell™
1Disconnect the Wii U GamePad.
2Open the InvisiShell, then orient and align the GamePad with the
InvisiShell.
3Gently press the GamePad into the InvisiShell.
4Close the top half of the InvisiShell, then press down on the right side of
the InvisiShell until the side snap clicks into place. Repeat on the left side.
5While rmly holding the GamePad, press rmly up on each tab to lock the
InvisiShell closed.
Removing your InvisiShell
1Disconnect the Wii U GamePad.
2While firmly holding the GamePad,
press firmly down on each tab to
unlock them.
3Open the InvisiShell by using your ngertips
to slowly separate the InvisiShell on the right side until the side snap
releases. Repeat this on the left side.
4To remove the GamePad, firmly hold the InvisiShell and gently press the
ZR or the ZL button to lift the GamePad out.
90-day limited warranty
Visit www.rocketfishproducts.com for details.
Contact Rocketfish:
For customer service, call 1-800-620-2790
www.rocketfishproducts.com
™ and © 2012 Nintendo. Licensed by Nintendo.
ROCKETFISH is a registered trademark of BBY Solutions, Inc. Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2012 BBY Solutions, Inc. All Rights Reserved.
ENGLISH 12-1021
Tabs
Side snaps
Unlock
Tabs
Side snaps
Lock