Rogers Small Appliance Module User manual

Small Appliance
Module
Set-Up Guide

2 Smart Home Monitoring | Small Appliance Module | Introduction
Thanks for choosing Rogers
Smart Home Monitoring!
Once you've set-up your Small Appliance Module, you will be able to turn
your small appliances on or o remotely and set up custom schedules,
like having your coee maker automatically start brewing when you wake
up in the morning.
Let's begin!

3 Smart Home Monitoring | Small Appliance Module | Introduction
Please refer to the enclosed manufacturer’s installation guide for operating and safety
instructions. To avoid injury, read all set-up and safety information included in your package
before installing and setting up your device. As set out in your service agreement, Rogers will
not be liable for any damage to your property as a result of your installation. If you encounter a
problem setting up your device, or wish to book a Rogers technician to come set it up, please
call Rogers Technical Support at 1-888-764-3771 or visit www.rogers.com/install.
Helpful hints
Package contents
1. Small Appliance Module
2. Manufacturer’s installation guide
Installation notes
1. Install the Small Appliance Module using the manufacturer’s installation guide provided
in the box.
2. Pair the Small Appliance Module to your Smart Home Monitoring system using this guide.

4 Smart Home Monitoring | Small Appliance Module | Introduction
Which Smart Home Monitoring
plan do you have?
2. Aware, Assure,
Protect, Control Plan
You'll be installing this device with your
Touchpad today. to go to Section 2.
1. Basic Plan
You'll be installing this device
with your smartphone today.
to go to Section 1.
Can’t remember which plan you’re on? Login to your MyRogers account and look under
“Account Services” or visit smarthome.rogers.com.
Helpful hints:
Please refer to the enclosed manufacturer’s installation guide for operating and safety
instructions. To avoid injury, read all set-up and safety information included in your package
before installing and setting up your device. As set out in your service agreement, Rogers will
not be liable for any damage to your property as a result of your installation. If you encounter
a problem setting up your device, or wish to book a Rogers technician to come set it up, please
call Rogers Technical Support at 1 888 764-3771 or visit www.rogers.com/install.
or
Click here
Click here

5
Pairing the Small Appliance
Module with your smartphone
Smart Home Monitoring | Small Appliance Module | Smartphone Set-Up
Before you begin:
Login to your Rogers Smart Home Monitoring app. (Can’t remember your
login info? Visit rogers.com to retrieve your username or password). The pairing
instructions below should be followed once you have completed the activation
of your Smart Home Monitoring system.
1

6 Smart Home Monitoring | Small Appliance Module | Smartphone Set-Up
3. Tap Lights.
2. On My Home screen, tap Settings, then Manage Devices then Add Devices.
1. Login to your Rogers Smart Home Monitoring app. (Can’t remember your login info?
Visit rogers.com to retrieve your username or password).

7 Smart Home Monitoring | Small Appliance Module | Smartphone Set-Up
4. Prepare your Small Appliance Module to be paired
following the simple instructions on your screen.
For more detailed instructions, you can tap More.

8 Smart Home Monitoring | Small Appliance Module | Smartphone Set-Up
5. Once the Small Appliance Module is detected you will see the Light icon, and Pairing...
will appear.
Once pairing is complete, a blue check mark will appear to the right.
Please note the Hub may take between 1 to 3 minutes to detect the Small Appliance
Module.
Tap Continue to complete pairing.

99
6. Tap Edit to configure the Small Appliance Module.
7. The naming box shows the default name of
Small Appliance Module. Tap on this box to
customize its name (e.g. Coee Machine).
When you’re done, tap Save.
Smart Home Monitoring | Smoke/Fire Sensor | Smartphone Set-Up

10 Smart Home Monitoring | Small Appliance Module | Smartphone Set-Up
Your installation is done!
Your Small Appliance Module is now part of your Smart Home Monitoring
system. Now you can control your small appliances remotely with your
smartphone app and through the Web Control Centre.
Start using this device:
Use your smartphone app or visit the Web Control Centre at smarthome.rogers.com to:
·Turn your appliances on and o remotely.
·Set up rules such as turning your lights on and o at scheduled times.
·Learn more about the features of your Smart Home Monitoring system.
How to reset this device:
If you are trying to add your Small Appliance Module to your Smart Home Monitoring system
and you are unable to pair it in the first few attempts, or if you see an error while pairing, try the
following steps to reset the Small Appliance Module and then pair it again.
1. Remove the Small Appliance Module from the wall outlet.
2. Press and hold the small white power button as shown on the left.
3. While holding the button plug the device back into the wall.
The Green LED will come on and when it turns o, release the
button and the Green LED should start blinking. The LED
location is shown on the left.
4. Now, try the pairing process again.
Troubleshooting:
If the device appears to be functioning improperly, please follow the suggested steps:
1. Confirm that the device is being supplied from a 120V power source.
2. Confirm that the device is being controlled in a proper way (local switch is ON).
3. Ensure that the appliance does not exceed 15A current.

11 Smart Home Monitoring | Small Appliance Module | Smartphone Set-Up
How to remove this device from your system:
If at any point in the future, you'd like to remove the Small Appliance Module from your
Rogers Smart Home Monitoring system, follow the steps below:
1. Login to your Rogers Smart Home Monitoring
mobile app.
2. On My Home screen, tap Settings at the bottom.
3. Go to Manage Devices.
4. Under Installed Devices, select the Small
Appliance Module you want to remove by tapping
Edit next to the device name.
5. Under Edit Device, tap Remove Device
(see example).
6. Tap Save to confirm.

12 Smart Home Monitoring | Small Appliance Module | Touchpad Set-Up
Pairing the Small Appliance
Module with your Touchpad
Before you begin:
Plug the Small Appliance Module into an electrical outlet and follow the
steps below to pair it with your system, using your Rogers Smart Home
Monitoring Touchpad.
1. Plug the Small Appliance
Module into any standard wall
outlet.
2. Ensure your Smart Home
Monitoring system is disarmed.
3. On the Touchpad, select the
Settings app from the
Home Screen.
4. Enter your 4-digit Master
Access Code. (The same
code that you use to manage
your system.)
2

5. Select Home Devices under
the Categories list.
6. Scroll down and select
Lighting, then select
Add Lights.
13 Smart Home Monitoring | Small Appliance Module | Touchpad Set-Up

10. The On/O Light
icon will appear again.
Tap on it to customize
its name (i.e. Hair dryer).
9. Click Done once the
On/O Light icon appears
and hit Next to confirm.
11. Click Return to Menu
to complete pairing of the
Small Appliance Module.
7. On the Locating Lighting
Devices screen press Next.
8. On the Touchpad a Pairing
icon will appear and change
to an On/O Light icon once
pairing is complete. Please
note this may take
2 to 5 minutes.
14 Smart Home Monitoring | Small Appliance Module | Touchpad Set-Up

15 Smart Home Monitoring | Small Appliance Module | Touchpad Set-Up
Your installation is done!
Your Small Appliance Module is now part of your Smart Home Monitoring
system. Now you can control your small appliances remotely with your
smartphone app and through the Web Control Centre.
Start using this device:
Use your smartphone app or visit the Web Control Centre at smarthome.rogers.com to:
·Turn your appliances on and o remotely.
·Set up rules such as turning your lights on and o at scheduled times.
·Learn more about the features of your Smart Home Monitoring system.
How to reset this device:
If you are trying to add your Small Appliance Module to your Smart Home Monitoring system
and you are unable to pair it in the first few attempts, or if you see an error while pairing, try the
following steps to reset the Small Appliance Module and then pair it again.
1. Remove the Small Appliance Module from the wall outlet.
2. Press and hold the small white power button as shown on the left.
3. While holding the button plug the device back into the wall.
The Green LED will come on and when it turns o, release the
button and the Green LED should start blinking. The LED
location is shown on the left.
4. Now, try the pairing process again.
Troubleshooting:
If the device appears to be functioning improperly, please follow the suggested steps:
1. Confirm that the device is being supplied from a 120V power source.
2. Confirm that the device is being controlled in a proper way (local switch is ON).
3. Ensure that the appliance does not exceed 15A current.

1. Ensure your Smart
Home Monitoring
system is disarmed.
2. On the Touchpad, select
the Settings app from the
Home Screen.
3. Enter your 4-digit Master
Access Code (This is the
same code that you use to
manage your system.)
How to remove this device from your system:
If at any point in the future, you'd like to remove the Small Appliance Module from your Rogers
Smart Home Monitoring system, follow the steps below:
16 Smart Home Monitoring | Small Appliance Module | Touchpad Set-Up

4. Select Home Devices under
the Categories list.
5. Under Home Devices, select
Lighting. On the next screen,
select Delete Lights. Now,
select the Small Appliance
Module you want to delete
and press Yes to confirm.
The Small Appliance Module
you selected has now been
removed from your system.
6. Click Return to Menu to exit
the screen.
17 Smart Home Monitoring | Small Appliance Module | Touchpad Set-Up