Rogers Ignite TV XR11 Operating instructions

How to use your Ignite TV Voice Remote: Program & pair
BEFORE YOU START:
•Find out which of these Ignite TVTM voice remotes you own:
XR11 Voice Remote
XR15 Voice Remote
•Power on. Turn on your TV and/or audio device.
•Check your batteries. Press any button on the voice remote until the LED light turns either
red or green. If the LED does not light up, replace your batteries.
LED on XR11
LED on XR15
•Check Voice Commands Press the Mic button on the Voice Remote and say, “Help”.

Did a Troubleshooting Menu appear on your TV?
YES
NO
Go ahead and program your remote
to work with your TV and audio
devices.
You’ll need to pair your remote with
the Ignite TV box.
Pair your Voice Remote with the Ignite TV Box
Once paired, you can use your remote to change channels, use voice commands, search for shows
and much more… even if you’re in another room!
VOICE REMOTE
STEPS
•Press the Setup button on your Voice
Remote until the LED at the top
changes from red to green.
•Press the Rogers The LED will begin
flashing green and the TV screen will
prompt you to enter a provided 3-
digit code. This may take a few
moments to display on your TV.
•Enter the 3-digit code to finalize the
pairing.
•You will now see the
message: “Would you like to control
your TV using your remote?” Click
“Not now”.
•You have now paired your XR11
remote to the Ignite TV set top box.
Try using voice commands.

VOICE REMOTE
STEPS
•Press and hold the Rogers and Info (i)
buttons at the same time for 5
seconds. Wait for the remote light to
change from red to green.
•Follow the instructions by entering
the 3-digit, on-screen pairing code.
This may take a few moments to
display on your TV.
•You will now see the
message: “Would you like to control
your TV using your remote?” Click
“Not now”.
•You have now paired your XR15
remote to the Ignite TV set top box.
Try using voice commands.

Program your Voice Remote to work with your TV
Turn your TV on or off, and control your TV’s volume using the voice remote. Here’s how to set it
up.
Program or pair your remote with your TV to control the power and volume.
1. Press the Abutton on your Voice Remote.
2. Select Remote Setup.
3. Follow the on-screen instructions.
Still not working? Try these steps for your specific remote type:
* Please make sure TV is powered on.
VOICE REMOTE
STEPS
•Hold the Setup button until the LED
light changes from solid red to solid
green.
•Enter 9-9-1. The LED will flash green
twice.
•Press the CH+ button slowly multiple
times until the TV turns off.
•Once the TV is turned off, press
the Setup button to lock in the code.

VOICE REMOTE
STEPS
•Press and hold the A and Dbuttons at
the same time until the LED at the top
changes from red to green.
•Enter 9-9-1. The LED button will flash
green twice.
•Press the CH+ button slowly multiple
times until the TV turns off.
•Once the TV is turned off, press
the Select button located at the
centre of the arrow controls to lock in
the code.
Program your Voice Remote to work with other devices
Got an AV receiver or sound bar? You can control the volume of these audio devices using the
Voice Remote.
To program or pair your Voice Remote to control AV receivers like HDMI compatible sound bars and
your home theatre:
1. Press the A button on your Voice Remote.
2. Select Remote Setup.
3. Follow the on-screen instructions.
Keep in mind, not all TV and audio devices can be paired
Last updated: May 6, 2020