Rolfit VX-180E User manual

Mountingthecomputer
Initiatingthecomputer
Startmeasurement
Settingupthecomputer
Appendix/Appdownload
●
●
●
●
●
BluetoothCyclingComputer
UserManual
ROLFITVX‐180E
Ridingonline

1.Mountingthebracket
Mountingthecomputer
Mountingonstem Mountingonhandlebar
●Changebracketdirectionifneeded
Losescrews Takedownholder
Mountholderafterrotation Fastenscrews

LockOringrubber
●MountingbyOringrubber
Removeadhesivetapefilm MountOringrubber

Mountthecomputerinthebracket
2.Mountingthecomputer
Openthebatterycoverwithacoin,and
removetheinsulatingfilmunderCR2032battery
Insulatingfilm
CR2032battery
Pushandturn
“Click”

Initiatingthecomputer
NOTE:
Computershallbeconfiguredbeforefirsttimeuse.
1.Chooseconnection
• Whenthefirsttimecomputerpowerson,aninitial
linkshallbeselected.
Toucharea Set Mode

ACTION:
PressSet toswitchconnection.
PressMode toconfirmselectionandjumptonext
setting.
NOTE:
LINKTOPHONE:Computercanonlyconnectstoa
smartphoneandautogetsettingsfromits
application.
LINKTOSENSOR:Computercanonlyconnectsto
acadencesensorandallsettingsshallbeset.
• Setcurrenttimein24hourclockintocomputer.
2.Settime

ACTION:
PressSet toincreasenumbers.
PressMode tomovetonextdigitandjumpto
nextsetting.
3.Setunit
ACTION:
PressSet toswitchunit.
PressMode toconfirmselectionandjumptonext
setting.
NOTE:
Seeunitdifferencesasbelow.
CN US
AVGSPD km/h mile/h
MAXSPD km/h mile/h
TRIPDST km mile
ODO km mile
WEIGHT kg lb

4.Settirecircumference
• Settirecircumferenceinmillimeter.
NOTE:
Pleasereferto“Tirecircumference”.
ACTION:
PressSet toincreasenumbers.
PressMode tomovetonextdigitandjumpto
nextsetting.
5.Setweight
• Weightunitfollowsprevioussetting.Itmustbe
bodyweight+cycleweight.

ACTION:
PressSet toincreasenumbers.
PressMode tomovetonextdigitandjumpto
nextsetting.
6.Setbacklight
ACTION:
PressSet toswitchbetweenonandoff.
PressMode toconfirmselectionandcompletethe
setup.
• Selecttoturnon/offbacklight.
NOTE:
Backlightwillbewakenupbytouchingorpressing
buttons.