RONEBERG RSK1 User manual

INSTRUKCJA OBSŁUGI
RONEBERG RSK1
Dziękujemy za wybór naszego zegarka RSK1. Prosimy o dokładne
zapoznanie się z tą instrukcją, aby zrozumieć sposób korzystania z
urządzenia. Firma zastrzega sobie prawo do wprowadzenia zmian w
treść instrukcji, bez uprzedniego powiadomienia.

Pasek
Wyświetlacz
Obszar
dotykowy
piny do ładowania
kabel USB
Sensor pomiarów
Budowa zegarka
Podstawowe działanie
Aby włączyć, przytrzymaj obszar dotykowy przez
1-2 sekundy
Po uruchomieniu naciśnij na ekran, aby go przełączyć.
Dłuższe przytrzymanie spowoduje potwierdzi wybór
funkcji. Naciśnięcie guzika funkcyjnego powoduje
powrót do głównego widoku interface’u.
Działania jest bardzo proste i dotyczy każdej funkcji.
Aby wyłączyć, znajdź w menu “power off” i przytrzymaj
obszar dotykowy przez 1-2 sekundy, aby wyłączyć
smartwatcha.
(Podczas wyłączania zegarek zawibruje. )
guzik funkcyjny
•
•
•

· · · Search for "WearFit2.0" from the Play store.
· · · Search for "WearFit2.0" from the APP store.
Przed użyciem
Przed pierwszym użyciem upewnij się, że bateria jest
odpowiednio naładowana. Jeśli tak nie jest, naładuj
ją korzystając z kabla USB dołąćzonego do zestawu
USB cable to touch the metal contact on the back of
the watch, and plug the other end of the charger into
the USB charging head or the USB interface of the
computer. The charging icon displayed on the screen is
Charging.
Please note that be careful not to use fast charging
which is not supported.
※
You can also scan the QR below and download APP
with your smartphone.
Android / iOS
※
Install the application on your smartphone when you
use it.
Android system
iOS system
★
★
•
•

App connected to SKY 1
You can skip the input, or you can set it later.
Enter gender, height and weight.
Turn on bluetooth, turn on GPS, and click in the
figure to add devices for more health information.
※
After selecting, the popup window "Do you want to
pair with SKY 1?" Select pairing.
Operating Picture (Image SKY 1)
After the setup is complete, you can set it from the center of the application.
②
①
③
Click on in the figure to select the device to be
added. If SKY 1 is not displayed, try the following.
(※
Make sure the smart watch is turned on, hold the
smart watch close to the smartphone, and search the
smartphone app again.)
①
②①
③②
④

switch
Long press
Function introduction

Settings notes
Change the screensaver and language
When the smartphone is Android, the settings for
message notifications may vary depending on the
model.
If display info is not turned on in your smartphone
settings, the message may not appear on your phone.
Please change your smartphone's display settings.
Ensure that the WearFit2.0 application and device are
connected.
In the WearFit2.0 APP interface, click the dial selection,
and click to select the picture to replace the selected
dial.
When the device connects to WearFit2.0 APP, the
device will automatically change according to the
language of the smartphone (the unsupported
language will not automatically change).
•
•
①
②
③

If exercise, sleep and heart rate data are not
synchronized to APP.
The watch side did not receive the push message.
Please try disconnecting bluetooth (the SKY 1 on your
smartphone should also be ignored) and reconnect it.
Please make sure that the WearFit2.0 APP is running
in the background and that the message notification
is enabled.
(Auxiliary function also needs to be turned on).
If the watch can't have the screen lighted up.
Please connect the watch to the charger.
Q:
A:
Q:
A:
Q:
A:
Q&A

【Confirmations】
Be sure to turn on the bluetooth of your mobile phone.
(If OFF, the connection will be released).
Matching Error
【How to solve it】
Remove the device from the WearFit2.0 APP.
Remove the device from the bluetooth settings of the
smartphone.
Turn off bluetooth, GPS and WearFit2.0 APP.
※
To close the application, please confirm the use of
the smartphone. In addition, if you do not know the
use, it is recommended to restart the smartphone.
Start WearFit2.0 APP to connect to the device.
Bluetooth, wireless-intensive environment, smartphone
updates and so on may lead to incorrect connection
with the device.
•
•
①
②
③
④

No message push received
Open the auxiliary function settings WearFit2.0 APP.
(Find the auxiliary function in the mobile phone
settings and open the auxiliary function settings of
WearFit2.0 APP).
Confirm that the message push switch is turned on in
the WearFit2.0 APP.
Confirmation messages can be displayed normally in
the iPhone notification bar. (You need to find the
notification settings in the iPhone settings, turn on the
notification switch of WeChat, Whatsapp, Phone,
Messages, etc).
Confirm that the message push switch is turned on in
the mobile phone settng.
Confirm that the message can be displayed normally in
the mobile phone notification bar, and the watch
message push is done by reading the mobile phone
notification bar message, if there is no message in the
mobile phone notification bar, the watch will not be
able to receive the push. (You need to find the
notification settings in the mobile phone settings and
turn on the notification switch of WeChat, Whatsapp,
Phone, Messages, etc).
Android mobile phone settngs:
iPhone settings:
①
②
①
②
③

Matters needing attention
The device should be kept clean. Especially in the place
where the device comes into contact with the body,
please keep clean and avoid excessive moisture.
Please do not fasten the strap too tightly.
Please do not apply cosmetics on the wrist in the
wearing state.
If you notice any skin problems, please stop using this
product.
If you have any questions about the product or
application, please contact the distributor.
Don't bang on the product.
Please do not use this device in the bathtub or the
sauna room or any high-temperature, high-humidity
place, in order to avoid breakdown.
Device measurement values are for reference only,
please note that it cannot be used for medical
purposes.
•
•
•
•
•
•
•
•

Warranty and after-sales service
1. Product damage caused by customer's own
disassembly.
2. The product is damaged due to the influence of
immutable factors.
3. Water and other liquid damage to COLMI smart
watch.
Free repair:
During the warranty period, you can repair product
failures free of charge by showing receipts and quality
assurance statements and contacting the store where
you purchased the product. The customer will be
responsible for the freight at the time of return.
Otherwise, the following reasons do not meet the
requirements for free repair:
Warranty period: within 12 months from the date of
purchase.
Product quality assurance manual