ROOMLIFE ATTICUS User manual

ATTICUS CONSOLE TABLE
INDOOR USE ONLY · SIMPLE ASSEMBLY REQUIRED · MADE IN CHINA
H 78 CM x W 100 CM x D 30 CM · LOAD LIMIT: 20 KG PER SHELF
MDF with metalframe.
WARNING Do not stand on product. Do not use as a step ladder. Do not use product unless
CARE INSTRUCTIONS

It is STRONGLY RECOMMENDED that you ANCHOR this product.
Toppling furniture can cause serious injuries and death.
securely
attach this product
IMPORTANT:
Regularly check
drawer locks
Do not
CAUTION:
person to install and anchor the product.
WARNING:

1.Top Panel :1PC
2.Upper Metal Support Rail :2PCS
3.Metal Side Frame :2PCS
4.Bottom Panel :1PC
5.Bottom Metal Support Rail :2PCS
6.Corner Brace :4PCS
A.Short Bolt :24PCS
B.Long Bolt :20PCS
C.Allen Key :1PC
D.Screw :1PC
E.Plastic Anchor :1PC
F.Anti Tip Strap :1PC
G.Flat Washer :2PCS
4
C

6PCS 1PC
8PCS 1PC
C
C
16PCS
CAUTION: if using power tool drill be careful not to over tighten hardware as this may
damage parts.
4
Note: Fully tighten all bolts/screws once fully assembled.
Check furniture regularly to ensure all bolts/screws
are secure and tighten any loose bolts/screws.
THE INSIDE.

STEP 3
3
STEP 4
6PCS 1PC
C
1PC 1PC
8PCS
A
4

4
WALL
WALL
Table
Top
E
1PC 1PC 1PC
STEP 5
Drill a hole in the wall and insert the Plastic Anchor.
WALL
Insert screw through Flat Washer and Anti Tip Strap into hole in wall.
4
Note: this tipping restraint hardware can not be used on brick or wood.
You should seek an appropriate alternative for wall materials other than plaster.