ROOMLIFE ZEN User manual

ZEN BAR STOOL
INDOOR USE ONLY · SIMPLE ASSEMBLY REQUIRED
H 92 CM x W 42 CM x L 49 CM | LOAD LIMIT: 125KG
Seat and back: Natural rattan and rubber wood.
Frame: Chrome plated steel
WARNING
Do not stand on product. Do not use as a step ladder. Only use on
even surfaces. Do not use product unless all bolts, screws and knobs
are rmly secured. Failure to follow these warnings could result in
serious injury.
CARE INSTRUCTIONS
Wipe frame with a soft cloth. Blot any spills immediately. Do not
use abrasive materials or solvents. Store in a dry place. Avoid
direct sunlight.
MADE IN CHINA

ASSEMBLY
INSTRUCTIONS
Step 1 Step 2
Please read instructions
carefully. Remove all
wrapping material, staples
and packing straps from the
outer carton. Check the
assembly guide to ensure
you have all required
components before you
begin assembly. Assembling
this product on a soft
surface protects its nish.
Insert frame parts D into the hole of part C
as shown.
All bolts/screws are lined up and iseerted into the
holes, attach seat part (B) to the metal unit part (C)
and part (D) assembled as shown, secure it well by
using bolt (E) and wrench (F).

ASSEMBLY
INSTRUCTIONS
Step 3 Step 4
Please read instructions
carefully. Remove all
wrapping material, staples
and packing straps from the
outer carton. Check the
assembly guide to ensure
you have all required
components before you
begin assembly. Assembling
this product on a soft
surface protects its nish.
Insert frame parts D into the hole of part C
as shown.
All bolts/screws are lined up and iseerted into the
holes, attach seat part (B) to the metal unit part (C)
and part (D) assembled as shown, secure it well by
using bolt (E) and wrench (F).