ROOMS TO GO HLVN 6941-39 User manual

ASSEMBLY
INSTRUCTION
DUAL POWER SOFA
HLVN 6941 / 56941B
Manufacture for Rooms To Go
HLVN SKU:
6941-39 11169693
56941B-39 15156690
LIST OF PARTS
NO. Description Item Qu ntity
ABackrest
(LSF, Mi le, RSF) 3
B Seat 1
CWall plug
transformer 1

ASSEMBLY INSTRUCTIONS
Step
1
:
Take out carefully the back cushions & seat from the packing.
Step 2: Positing the female metal receiver brackets over the male metal posts. Push own the female brackets
over male posts simultaneously until each si e is locke into place an au ile "click" is hear .
POWER CONNECTION
Step 3: Lift velcro flap locate at the bottom back. Latch male wire plug from backrest (hea rest motor wire) to
female wire receiver locate at the bottom back un erneath the flap. This instruction is applicable to all power
hea rest. Allow sufficient space between reclining sofa an the wall behin it.
Step 4: Latch male wire plugs from mi le backrest (wireless charger) to female wire receivers locate at the
bottom back un erneath the flap.
Step 5: Connect wall plug transformer to transformer switch.
An connect transformer plug to electrical outlet.

ELECTRICAL CONTROLS
1
Press
button
to
recline
the
sofa
to
esire
position
2
Press
button
to
raise
the
sofa
to
the
upright
position
.
3
Press
button
to
activate
the
hea rest
forwar
.
4
Press
button
to
return
hea rest
to
the
close
position
.
5
Press
button
to
activate
the
cup
hol er
light
.
6
USB
port
WARNINGS
*
Keep
unit
at
least
6
"
from
wall
.
*
Keep
unit
at
least
24
"
from
all
heat
sources
.
* Avoi placing unit in areas where unit can be expose to irect sunlight other powerful light sources, as fa ing or
iscoloration may occur.
*
Do
not
reach
un er
seat
when
mechanism
is
operating
or
serious
injury
may
occur
.
*
Reclining
mechanism
shoul
only
be
operate
while
seate
properly
.
*
Do
not
sit
on
arms
or
backrest
.
*
Do
not
jump
or
roughhouse
on
furniture
.
*
If
unit
must
be
move
,
o
not
rag
.
Unit
must
be
lifte
in
or er
to
be
move
.
* Do not continuously operate mechanism for more than one minute or unit may go into protection mo e by
shutting own to prevent overheating.
*
Unplug
unit
from
power
source
prior
to
cleaning
mechanism
.
*
Do
not
allow
electrical
components
to
come
into
contact
with
any
liqui s
.

CARE AND CLEANING
* Upholstere furniture is package tightly to protect it uring transsit. This packaging can sometimes cause
creases or misshape cushions when the furniture comes out of the packaging. These issues will correct
themselves over time as the fibers of the cushions are expose to air. However, shaping the cushions with your
han s can alleviate the creases an compresse fibers more quickly.
* Use a vacuum cleaner to remove ust an ebris from seams an crevasses.
* Use a soft amp cloth to gently clean soile areas an wipe clean. Do not rub.
* Do not use househol cleaners or solvents. Such cleaners may cause amage an /or iscoloration.
* Do regularly use e icate leather care pro uct onto the leather furniture to prevent built up of bo y oils.
TROUBLE SHOOTING
PROBLEM SOLUTION
Hea rest not working Ensure that wall power outlet is functional Step 5
Ensure that hea rest power cable is plugge into the seat cable Step 3
Not Reclining Ensure that wall power outlet is opterational Step 5
USB not working Check all power connections Step 3, 5
Wrieless charger not working Check all power connections Step 3, 4, 5
Backrests gaps Ensure the backrests are properly clippe into the male posts locate on seat
mechanism. Check that brackets are not loose, positione improperly or bent.