ROOMS TO GO HLVN 10021-39 User manual

ASSEMBLY
INSTRUCTION
POWER SOFA
HLVN 10021 / 10023 / 10024 /1002A
Manufactured for Room To Go
HLVN SKU:
10021-39 15100338
10023-39 15100314
10024-39 15100326
1002A-39 11100310
LIST OF PARTS
NO. Description Item Qu ntity
ABackre t
(LSF, Middle, RSF) 3
B LSF Wing 1
C RSF Wing 1
D Seat 1
EWall plug
tran former 1

ASSEMBLY INSTRUCTIONS
Step 1: Take out carefully the back cu hion , wing & eat from the packing.
Step 2: Po iting the female metal receiver bracket over the male metal po t . Pu h down the female bracket
over male po t imultaneou ly until each ide i locked into place an audile "click" i heard.
Step 3: In ert the wing to the back on both ide . Plea e pay attention to the direction .
POWER CONNECTION
Step 4: Connect wall plug tran former to tran former witch.
And connect tran former plug to electrical outlet.
ELECTRICAL CONTROLS
1
Pre
button
to
recline
the
ofa
to
de ired
po ition
2
Pre
button
to
rai e
the
ofa
to
the
upright
po ition
.

WARNINGS
* Keep unit at lea t 6" from wall.
* Keep unit at lea t 24" from all heat ource .
* Avoid placing unit in area where unit can be expo ed to direct unlight other powerful light ource , a fading or
di coloration may occur.
* Do not reach under eat when mechani m i operating or eriou injury may occur.
* Reclining mechani m hould only be operated while eated properly.
* Do not it on arm or backre t.
* Do not jump or roughhou e on furniture.
* If unit mu t be moved, do not drag. Unit mu t be lifted in order to be moved.
* Do not continuou ly operate mechani m for more than one minute or unit may go into protection mode by
hutting down to prevent overheating.
*
Unplug
unit
from
power
ource
prior
to
cleaning
mechani m
.
*
Do
not
allow
electrical
component
to
come
into
contact
with
any
liquid
.

CARE AND CLEANING
* Uphol tered furniture i packaged tightly to protect it during tran it. Thi packaging can ometime cau e
crea e or mi haped cu hion when the furniture come out of the packaging. The e i ue will correct
them elve over time a the fiber of the cu hion are expo ed to air. However, haping the cu hion with your
hand can alleviate the crea e and compre ed fiber more quickly.
* U e a vacuum cleaner to remove du t and debri from eam and creva e .
* U e a oft damp cloth to gently clean oiled area and wipe clean. Do not rub.
* Do not u e hou ehold cleaner or olvent . Such cleaner may cau e damage and/or di coloration.
* Do regularly u e dedicated leather care product onto the leather furniture to prevent built up of body oil .
TROUBLE SHOOTING
PROBLEM SOLUTION
Not Reclining En ure that wall power outlet i opterational Step 4
Backre t gap En ure the backre t are properly clipped into the male po t located on eat
mechani m. Check that bracket are not loo e, po itioned improperly or bent.