ROOMS TO GO HLVN 7105R1-19 User manual

ASSEMBLY INSTRUCTION
DUAL POWER RECLINER
HLVN 7105R1 / 7105R2 / 7105R3
Manufacture for Rooms To Go
IMPORTANT:
ASSEMBLING
THIS
UNIT
NEEDS
MINIMUM
2
PERSONS
HLVN
SKU:
7105R1-19 15471559
7105R2-19 15471561
7105R3-19 15471573
LIST OF PARTS
NO. Descriptio Item Qua tity
A Backrest 1
B Seat 1
CWall plug
transformer 1
D Woo Leg 4
E Plastic Leg 4
F Bolt 16

ASSEMBLY INSTRUCTIONS
Step
1:
Take out carefully the back cushions & inner carton from the packing.
Step 2: With seat cushion facing upsi e own. Attach 4 pcs woo legs (using 4 bolts per leg) & turn
4 pcs plastic legs clockwise until it has been completely screwe in.
Metal plate have to be aligne in a certain irection as shown in the following pictures.
Step 3: Flip platform an cushion over so it is right si e up. Test the sofa to make sure that it is level
an sitting evenly on the floor.
POWER CONNECTION
Step 4: Connect the a justable hea rest cables firstly, then place seat back cushions accor ingly.
Allow sufficient space between reclining chair an the wall behin it.
Step 5: Connect wall plug transformer to transformer switch.
An connect transformer plug to electrical outlet.

ELECTRICAL CONTROLS
1 Press button to recline the recliner to esire position
2 Press button to raise the recliner to the upright position.
3 Press button to activate the hea rest forwar .
4 Press button to return hea rest to the close position.
5 Press home button returns both footrest an hea rest
to the original upright or close position.
6
USB
port
WARNINGS
*
Keep
unit
at
least
4"
from
wall.
*
Keep
unit
at
least
24"
from
all
heat
sources.
* Avoi placing unit in areas where unit can be expose to irect sunlight other powerful
light sources, as fa ing or iscoloration may occur.
*
Do
not
reach
un er
seat
when
mechanism
is
operating
or
serious
injury
may
occur.
*
Reclining
mechanism
shoul
only
be
operate
while
seate
properly.
*
Do
not
sit
on
arms
or
backrest.
*
Do
not
jump
or
roughhouse
on
furniture.
*
If
unit
must
be
move ,
o
not
rag.
Unit
must
be
lifte
in
or er
to
be
move .
* Do not continuously operate mechanism for more than one minute or unit may go into
protection mo e by shutting own to prevent overheating.
*
Unplug
unit
from
power
source
prior
to
cleaning
mechanism.
*
Do
not
allow
electrical
components
to
come
into
contact
with
any
liqui s.

CARE AND CLEANING
* Upholstere furniture is package tightly to protect it uring transsit. This packaging can sometimes cause
creases or misshape cushions when the furniture comes out of the packaging. These issues will correct
themselves over time as the fibers of the cushions are expose to air. However, shaping the cushions with
your han s can alleviate the creases an compresse fibers more quickly.
* Use a vacuum cleaner to remove ust an ebris from seams an crevasses.
* Use a soft amp cloth to gently clean soile areas an wipe clean. Do not rub.
* Do not use househol cleaners or solvents. Such cleaners may cause amage an /or iscoloration.
* Do regularly use e icate leather care pro uct onto the leather furniture to prevent built up of bo y oils.
TROUBLE SHOOTING
PROBLEM SOLUTION
Hea rest not working Ensure that wall power outlet is functional Step 5
Ensure that hea rest power cable is plugge into the seat cable Step 4
Not Reclining Ensure that wall power outlet is operational Step 5
USB not working Check all power connections Step 4, 5
Backrests gaps Ensure the backrests are properly clippe into the male posts locate on seat
mechanism. Check that brackets are not loose, positione improperly or bent.