ROOMS TO GO KIDS CREEKSIDE 2.0 3954440P User manual

WARNING DANGER
Failure to follow these warnings and assembly instructions could result in serious
injury or death. To help prevent serious or fatal injuries from entrapment or falls:
-
Read all instructions before assembling bunk bed and keep these instructions for future reference.
-
Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing
parts, or sharp edges. DO NOT Use bunk bed if any parts are missing or broken.
-
DO NOT Use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.COM
for replacement parts and instructional literature if needed.
-
Follow the information on the warnings appearing on the upper bunk end structure and on the carton,
DO NOT REMOVE WARNING LABEL FROM BED.
-
Always use the recommended size mattress or mattress supports, or both to help prevent the likelihood
of entrapment or falls.
-Ensure thickness of mattress and foundation combine does not exceed
10 inches (255mm
) and
mattress surface is at least
5 inches (127mm)
below upper edge of guardrails.
-
Do not allow children under 6 years of age to use the upper bunk.
-
Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
-
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
-
Limit top bunk use to one person.
-
Always use the ladder for entering and leaving the upper bunk.
-
Use of night light may provide added safety precaution for a child using the upper bunk.
-
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
-
The use of water or sleep flotation mattress is prohibited.
-
This bunk bed meets all the requirements of ASTM 1427-19.
STRANGULATION HAZARD:
Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
CREEKSIDE 2.0 COLLECTION
THANK YOU FOR YOUR PURCHASE
11/7/2022 Page 1 of 97

LADDER
P A R T S L I S T
RTG SKU # STYLE # ITEM DESCRIPTION
35940407 40G-703 FULL TOP BUNKBED END
36840406 40G-707 TWIN CASTER BED HD & FT
36040400 40G-711 5 DRW. LOFT CHEST
35940407 40G-703 FULL TOP BUNKBED END
36640402 40G-730 6 PC RAILS (2 GUARD & 4 SIDE RAILS)
36340406 40G-760 LOFT BOOKSHELF
37240405 40G-736 FULL RAIL CUP
36040400 40G-711 5 DRW. LOFT CHEST
36340406 40G-760 LOFT BOOKSHELF
40B-703 FULL LOFT END
38300238 100-648 FULL/FULL SLAT PACK
36240404 40G-601 FOLDING DESK (Add on)
36440408 40G-721 LADDER
38000232 100-645 TWIN SLAT PACK (4)
TOOLS NEEDED
12 Pc
81 Pc
24 Pcs
Phillips screwdriver (not included)
5/16"-18 x 3 3/8" Bolt
PARTS LIST QTY PARTS LIST QTY HARDWARE LIST QTY
Full top bunk bed end
1 Pc
Allen wrench (included)
24 Pc Ladder 5 mm Hex key
4 Pcs
Casters
Loft Bookshelf
16 Pcs
4 Pcs
5 Drw Loft chest
3/8" x 3 1/8" Metal
pin
10 2 Pc
1 Pc
92 Pc
Side rails 6 x 1 1/4"
Drywall screw
1 Pc
11/7/2022 Page 92 of 97
Full rail cup
71 Pc Headboard
12 1 Pc
Folding desk (Add on)
6
11
Footboard
36340418 40B-760
38300238 100-648
36240416 40B-601
36440410
6 x 1 1/4"
Drywall screw
40B-721
38000232 100-645
36340418 40B-760
37240417 40B-736
Guardrails
32 Pc
4 Pc
4
Twin slats
5
Full slats
4 Pc
FOLDING DESK HARDWARE
2 Pcs
FOLDING DESK (Add on)
3954440P FULL/TWIN LOFT W/ 2 CHESTS & 2 BOOKCASES CHARCOAL
3954441P FULL/TWIN LOFT W/ 2 CHESTS & 2 BOOKCASES CHESTNUT
6 PC RAILS (2 GUARD & 4 SIDE RAILS)
TWIN CASTER BED HD & FT
5 DRW. LOFT CHEST
5 DRW. LOFT CHEST
LOFT BOOKSHELF
LOFT BOOKSHELF
FULL RAIL CUP
TWIN SLAT PACK (4)
FULL/FULL SLAT PACK
36640414 40B-730
36840418 40B-707
35940419 40B-703 FULL LOFT END
35940419
36040412 40B-711
36040412 40B-711
A
B
C
D
E
C

CASES ON THE RIGHT CASES ON THE LEFT
RIGHT SIDE CASES
LEFT SIDE CASES
ASSEMBLY INSTRUCTIONS
For Right remove center molding by lifting up then pulling out, then
Remove fastening board and save for next step.
One for right side and one for left, side align both pieces and tight completely as shown.
11/7/2022 Page 93 of 97
Assemble bookshelf and chest, using the fastening board and bolts previously removed, align one chest and one bookshelf.
remove third drawer, for Left remove center molding and open the door.
STEP 3
STEP 2 B
B
STEP 1
B

Install slats, one on each end, two equally spaced in the middle, Assemble guardrails and tighten all bolts.
then fasten with 1 1/4" screws. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY
Assemble side rails Install slats, one on each end and two equally spaced in the middle,
MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY then fasten with 1 1/4" screws
ASSEMBLY INSTRUCTIONS
Assemble loft chest, loft bookshelf and top bunk bed ends. Assemble top side rails.
11/7/2022 Page 94 of 97
STEP 8
STEP 5
STEP 6
E
STEP 4
B
STEP 7
A
A
A
A
D
D
D
D
B
A
B
A
A
A
A
A
C
C
B
A
STEP 9
A
A
A
A
B
C

11/7/2022 Page 95 of 97
Screw ladder hooks to pre-drilled holes on top of ladder. Screw ladder to guardrail as shown.
Install casters in headboard and footboard, and set rail cup. Slide Caster bed under Loft bed as shown.
ASSEMBLY INSTRUCTIONS
STEP 12
STEP 10
STEP 11
G
G
G
G
G
G
STEP 13
F
F
F
F
FF

Twin size mattress- 74" - 75" long and 37-1/2" - 38-1/2" wide
Twin size Bunkie board- 74" long and 37-1/2" wide
Full size mattress- 74" - 75" long and 52-1/2" - 53-1/2" wide
Full size Bunkie board- 74" long and 52-1/2" wide
ASSEMBLY INSTRUCTIONS
11/7/2022 Page 96 of 97
Use only correct mattress dimensions and Bunkie board:
PLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUEST
Place Bunkie boards (required, sold separately) on top of the slats
STEP 14

then push down
11/7/2022 Page 97 of 97
Remove center molding by lifting up then pulling out Unfold desk leg and look for hardware pack inside desk box.
Secure each corner block with 1 1/4" screw
Unfold corner supports (from desk box hardware pack) in the pre-bore hole.
Place folding desk by sliding into the opening of loft chest
ASSEMBLY INSTRUCTIONS
STEP 15
STEP 12
STEP 16
STEP 13
STEP 14
C
C