ROOMS TO GO Sabella HLVN 10021 User manual

ASSEMBLY
INSTRUCTION
RECLINING CONSOLE LOVESEAT
HLVN 10021 / 10023 / 10024 /1002A
Manufactured for Roo s To Go
HLVN SKU:
10021-40 15300332
10023-40 15300318
10024-40 15300320
1002A-40 11300314
LIST OF PARTS
NO. Description Item Qu ntity
ABackrest
(LSF, RSF) 2
B LSF Wing 1
C RSF Wing 1
D Seat 1
E Console backrest 1
FTriangle nut
(for console) 2

ASSEMBLY INSTRUCTIONS
Step 1: Take out carefully the back cushions fro the packing and console's backrest fro inner console fra e
with its triangle nuts.
Step 2: Positing the fe ale etal receiver brackets over the ale etal posts. Push down the fe ale brackets
over ale posts si ultaneously until each side is locked into place an audile "click" is heard.
Attached the console backrest onto the console fra e. Identify the triangle nuts going through the dust cover,
push down the backrest and tighten the screws to lock and so avoid the backrest to ove. Repeat this step, twice
for each console.
Step 3: Insert the wings to the back on both sides. Please pay attention to the directions.
WARNINGS
*
Keep
unit
at
least
6
"
fro
wall
.
*
Keep
unit
at
least
24
"
fro
all
heat
sources
.
* Avoid placing unit in areas where unit can be exposed to direct sunlight other powerful light sources, as fading or
discoloration ay occur.
* Do not reach under seat when echanis is operating or serious injury ay occur.
* Reclining echanis should only be operated while seated properly.

*
Do
not
sit
on
ar s
or
backrest
.
*
Do
not
ju p
or
roughhouse
on
furniture
.
*
If
unit
ust
be
oved
,
do
not
drag
.
Unit
ust
be
lifted
in
order
to
be
oved
.
CARE AND CLEANING
* Upholstered furniture is packaged tightly to protect it during transsit. This packaging can so eti es cause
creases or isshaped cushions when the furniture co es out of the packaging. These issues will correct
the selves over ti e as the fibers of the cushions are exposed to air. However, shaping the cushions with your
hands can alleviate the creases and co pressed fibers ore quickly.
* Use a vacuu cleaner to re ove dust and debris fro sea s and crevasses.
* Use a soft da p cloth to gently clean soiled areas and wipe clean. Do not rub.
* Do not use household cleaners or solvents. Such cleaners ay cause da age and/or discoloration.
* Do regularly use dedicated leather care product onto the leather furniture to prevent built up of body oils.
TROUBLE SHOOTING
PROBLEM SOLUTION
Backrests gaps Ensure the backrests are properly clipped into the ale posts located on seat
echanis . Check that brackets are not loose, positioned i properly or bent.