ROOTECH Accura 2350-GW User manual

Accura 2350-GW
Quick Setup
Guide
※ Please refer to the User Guide for details

Accura 2350-GW Button Operation
Short press
Button
Long press
*Makes menu item changeable(blinking)
Move to the next menu item
/Change value.
Select the menu item to change*
/Save the changed value.

Accura 2350-GW ID Setup
ID
Setup range
(0~39)

Accura 2300[S] Button Operation
Long press
SETUP button
to enter
SETUP mode
Short
Press
Button
Long
Press
Move to the next menu item
/Change value.
Do not save
/Exit
Setup mode
Select*/
Save
Enter
Setup Mode
Enter
Event Mode
*Makes menu item changeable(blinking)

IP
Setup
range
Accura 2300[S] IP
000.000.000.000 ~ 255.255.255.255
ex)

Subnet Mask
Accura 2300[S] Subnet Mask
255.255.000.000 ~ 255.255.255.252
ex)
Setup
range

Accura 2350 Module ID Setup
How to Setup
Number of
communicable IDs
Number of conflict/
standby IDs
Total number of
Accura 2350s connected
to Accura 2300
Update module ID
information
Long Press Long Press
Return to
display mode
(Communication)
(Conflict)
(Total)
(ID update)
Long Press
blinks. (ID updated)
Stops blinking.

1. Download
Download "Accura Setup" software on Rootech website.
Download / Accura Setup Program
Download Accura Setup
Download
1
2
3

Run in the order of "More info"→"Run anyway" at the first run.
Run Accura Setup
2-3. Click 'Run anyway'
2-1. Run 'Accura Setup'
2-2. Click 'More info'
1
2
3

3. Select Device
Select Device

4. Enter Device IP Address
Check the configured device IP and enter it in the "IP address"
'010' 의 경우 '10' 으로 입력
ex) 10.10.10.100
IP address list
Connected with the device
by communication
Disconnected with the device
by communication
010.010.010.067
Entering Device IP

Accura Setup
Administrator password
rhksflwk
Password
1Click the Normal Mode button
Administrator permission granted to the user
2Enter the administrator password
5. Get administrator permission
3 Admin Mode
Normal Mode

Accura Setup RS-485
6. Select Accura 2350-GW Setup menu
7. Set up RS-485 communication
1Click the GW Setup menu
1Check communication setup parameters
(Refer to the next page)
2Click the Apply button
GW Setup
Apply

RS-485 Communication
2400, 4800, 9600, 19200, 38400, 57600, 115200Baud Rate[bps]
Parity Bit
Stop Bits
Delay[ms]
Response
Timeout[ms]
None, Even Parity, Odd Parity
1 Bit, 2Bits
Minimum=0, Maximum=200
Minimum=20, Maximum=2000
Setup range

8. Check data values
1Click the Add Device button
2Enter the ID address of the RS-485-enabled device
5Check data results after successful setup
3Check communication setup parameters
(Refer to the next page) 4Click the Apply button
Add
Device
Device
ID
Apply
Checking data values with
Accura Setup

Flow Type
Unique Number
Volume Integrated
Volume Gathered
Func Code
Address (Dec)
Address (Hex)
Data Type
Endian Type
GW Channels &
User Defined Expressions
PCW, CDA, DI, PN, GN
Number
mL, L, m3, cm3, in3, ft3, gal, bbl
mL, L, m3, cm3, in3, ft3, gal, bbl
0×03, 0×04
Decimal Number
Hex Number
INT16, UNIT16, INT32, UNIT32, FLOAT32
12:34, 34:12, 21:43, 43:21
Setup range

Please refer to
the User Guide for details