Rose electronics CrystalView DVI EX User manual

CrystalView DVI EX
KVM Extender, DVI, USB 2.0, Audio, CAT5
10707 Stancliff Road Phone: [phone]
Houston, Texas 77099 WWW.ROSE.COM
Quick Start Guide
CRK-2DTXT-EX/A1

Installing the CrystalView DVI EX extender is as simple as onne ting
the omputer’s monitor, USB port to the transmitter unit, onne ting up
to 3 USB 1.1 or 2.0 devi es to the re eiver unit and onne ting the lo al
and remote units together with CAT5 able. Apply +5VDC power to the
transmitter unit and +24VDC power to the re eiver, and it’s ready to
use.
In addition to extending three USB devi es, you an add up to 4
standard USB hubs to a ess additional USB devi es. Conne ting 4
USB hubs to the re eiver will in rease the number of USB devi es that
an be onne ted to a maximum of 13 devi es and 4 hub levels.
Conne tors
Conne torsConne tors
Conne tors
Lo al Video – DVI-D
USB – Type B
Inter onne t – RJ45
Remote Video – DVI-D
USB – 3 - Type A ports
Mi rophone – 3.5mm
headphone – 3.5mm
Inter onne t – RJ45
Power
PowerPower
Power Transmitter +5V DC
Re eiver +24V DC
Re eiver output – 500ma per USB output port
Indi ators
Indi atorsIndi ators
Indi ators
Transmitter Status – Green LED Video – Green / Amber LED
Link – Green LED USB – Green / Amber LED
Re eiver Status – Green LED Video – Green / Amber LED
Link – Green LED USB – Green / Amber LED
Local Unit Remote Unit
Up to 1640 ft.
Over CAT5
〒103-0014
東京都中央区日本橋蛎殻町 1-16-11
TEL:[phone] FAX:[phone]
URL:http://www.cybernetech.co.jp