Rose electronics RackView Dual Rail RV1-CDKVT19/DVI User manual

RackView
Dual-Rail
Sliding
KVM Rack Drawer
Installation
and
Operation Manual
10707 Stancliff Road
Houston, Texas 77099
Phone: [phone]
[e-mail]

LIMITED WARRANTY
Copyright Rose Electronics 2018. All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and
recording, without the prior written permission of Rose Electronics.
manual-rackview-dual-rail-2018-03-29
Rose Electronics®warrants the sliding RackView Dual Rail KVM Drawer to be in good working order for one
year from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in
good working order at any time during this one-year warranty period, Rose Electronics will, at its option, repair
or replace the Unit as set forth below. Repair parts and replacement units will be either reconditioned or new.
All replaced parts become the property of Rose Electronics. This limited warranty does not include service to
repair damage to the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit,
including static discharge and power surges.
Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose
Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail,
you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the
warranty service location, and to use the original shipping container or its equivalent. You must call for a return
authorization number first. Under no circumstances will a unit be accepted without a return authorization
number. Contact an authorized repair center or Rose Electronics for further information.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A
PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS
OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE
REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE
ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST
SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR
THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER
PARTY.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE.

DECLARATIONS OF CONFORMITY
This is to certify that, when installed and used according to the instructions in this manual, the units listed and
described here are shielded against the generation of radio interferences in accordance with the application of
Council Directives 2014/30/EU and 2014/30/EU, as well as these standards:
■EN 55022: 2010/AC:2011 (Class B)
■EN 55024:2010 + A1:2015
This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at their own expense.
This equipment fully complies with the requirements of European Union Regulation (EC) 1907/2006
concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH):
These devices comply with Directive 2011/65/EU of the European Parliament and of the council of 8 June
2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS 2, RoHS II). The device labels carry a respective marking.

TABLE OF CONTENTS
Contents
Disclaimer 1
System Introduction 1
Features 1
Package Contents 2
RackView Options 2
RackView Dual Rail Models 3
RackView Layout 3
RackView Rear Panel Connector Layout 4
Installation Procedure 5
Installation of the RackView Dual Rail 5
Front Panel Controls and OSD Function 7
Navigating the OSD Menu 7
Auto Tune 8
Input Source 8
Brightness 8
Contrast 8
Color 8
Position 9
Language 9
Recall 9
Exit 9
Turning on the RackView Dual Rail 9
Testing the RackView Dual Rail 10
Configuring the Display Settings 10
Safety 11
Maintenance and Repair 12
Technical Support 12
Figures
Figure 1. RackView product layout and dimensions 3
Figure 2. RackView rear panel connector layout 4
Figure 3. RackView installation procedure 6
Figure 4. OSD control panel buttons and OSD display 7
Figure 5 RackView integrated KVM switch model 16
Tables
Table 1. RackView product and packaging dimensions ................................................................... 15
Table 2. RackView product and packaging dimensions (including a KVM switch)............................. 15
Table 3. 8-port digital KVM switch connector specification ............................................................. 16
Appendices
Appendix A —Specifications 13

TABLE OF CONTENTS
Appendix B —Part Numbers 14
Appendix C —RackView Dimensions 15
Appendix D —RackView with Integrated KVM Switch 16
Appendix E —RackView DC Power Options 16

INTRODUCTION
RackView Dual Rail Manual 1
Disclaimer
While every precaution has been taken in the preparation of this manual, the manufacturer assumes no
responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting
from the use of the information contained herein. The manufacturer reserves the right to change the
specifications, functions, circuitry of the product, and manual content at any time without notice.
The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances
outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury
arising directly or indirectly from the use of this product (See limited warranty).
System Introduction
Thank you for choosing the Rose Electronics Dual Rail KVM Drawer, a unique 1U dual rail system for the
independent operation of a keyboard, mouse and monitor.
The RackView is available in 17-inch and 19-inch display models, with video resolutions up to 1280 x 1024
(SXGA). This easy-glide KVM station contains a high-resolution TFT/LCD monitor, a tactile keyboard, and a
touchpad mouse.
The instructions in this manual assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding video display device operation.
Features
■1U model with 17" and 19" Widescreen TFT/LCD monitor resolution up to 1280 x 1024, VGA or DVI
■Front panel controls provide access to the OSD for set-up and quick adjustments of
color, brightness, contrast, position, auto-tune, and input source
■USB or PS/2 touchpad/keyboard interface
■Full size 106 key keyboard with a separate numeric keypad and a 2-button touchpad mouse
■Supports Windows, Linux, Unix, Sun, MAC OS
■Quick and easy “one-man” rack mounting installation, the RackView drawer can be mounted at any height
in a standard 19" rack
■Fold and tilt the LCD Monitor for optimum viewing position
■18 International keyboard versions available
■Mounting rails included

RackView Dual Rail Manual 2
Package Contents
The RackView package contents consist of the following:

1 x RackView sliding dual rail KVM drawer

2 x Mounting bracket sets (sliding rails) and support brackets (2)

1 x Set of plates, screws, rings, and washers for assembly

2 x Locking keys

1 x Combo interface cable, 5ft (1.8m)

1 x DVI and 1 x USB-AN interface cable, 5ft (1.8m)

1 x Power supply unit

1 x Power cable

1 x Manual
The above package content is only for the single console model. The contents can vary with options such as a
touchscreen, audio, and DC power.
Additional cables are usually ordered separately. If the package contents are not correct, contact Rose
Electronics or your reseller so the problem can be quickly resolved.
RackView Options

DVI/USB KVM Switch with 8 x CPU ports, USB2.0, 2-port hub and analog audio

Trackball mouse

Analog audio

DC power, +/-12V, +/-48V
Before Installation
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the mounting location has good ventilation, is out of direct sunlight, and away from sources of
excessive dust, dirt, heat, water, moisture, and vibration.

MODELS
RackView Dual Rail Manual 3
RackView Dual Rail Models
The RackView Dual Rail is available as described below.
RackView Layout
RackView Layout and Dimensions
Figure 1. RackView product layout and dimensions
Dual Rail 17" Model
Dual Rail 19" Model
Measurements in mm

RackView Dual Rail Manual 4
RackView Rear Panel Connector Layout
The RackView rear panel includes an HD15(KVM) and DVI-D connector as standard. The HD15(KVM)
connector supports VGA video, and also the keyboard/mouse interface.
This diagram shows the approximate positioning of the DVI-D and KVM connectors on the rear panel.
1 = PS2 keyboard connector
2 = VGA connector
3 = PS2 mouse connector
4 = USB-HID connector
5 = DVI connector
6 = IEC power socket
Figure 2. RackView rear panel connector layout
1
2
3
4
5
6

INSTALLATION
RackView Dual Rail Manual 5
Installation Procedure
Installation of the RackView Dual Rail
Step 1 (short rails)
17" unit: For a rack depth 420 ~ 470 mm
19" unit: For a rack depth 480 ~ 530 mm
Release the thumb screw on the front of the bracket
(both sides)
Install the front bracket from each side using cabinet
screws
Step 2
Install the rear bracket from each side
Step 3
Use cabinet screws to install and fix the rear bracket
Step 1 (long rails)
17" unit: For a rack depth greater than 535 mm
19" unit: For a rack depth greater than 595 mm
Remove the screws of long rail bracket and safely
locate these screws
Step 2
Combine (I) to each side of the rail using 5 cap
screws

RackView Dual Rail Manual 6
Step 3
Combine (I) and (II) to the RackView chassis using
cap screws on each side
Step 4
Release the thumb screw on the front bracket and
Install the front bracket from each side using cabinet
screws
Step 5
Combine (I)+(II) and (III) using the original screws
and install the rear bracket from each side using
cabinet screws
Use the support bracket to replace (III) when the rack
depth is more than 680 mm (17" unit) or 745mm
(19" unit)
Step 6
Finish the installation as shown below
Figure 3. RackView installation procedure

OPERATION
RackView Dual Rail Manual 7
Front Panel Controls and OSD Function
The OSD control panel is mounted either horizontally or vertically, next to the LCD display.
To access the OSD, press the “Menu” button and the OSD will appear on the monitor
Figure 4. OSD control panel buttons and OSD display
Navigating the OSD Menu
There are eight different selectable menu items in the OSD.
To operate the OSD, press the “Menu” button
Use the “Down” and “Up” buttons to scroll through the Menu
Once the menu item has been selected, press the “Menu” button again to enter the sub-menu

Auto tune.

Input Source

Brightness

Contrast

Color

Position

Language

Recall

Exit

RackView Dual Rail Manual 8
Auto Tune
Press the “auto tune” button. The panel will adjust the display size automatically and also tune the panel to its
optimum video resolution.
Input Source
Press the “menu” button to enter and you will see:
VGA / DVI
Use the “Down” and “Up” button to select the input source of signal.
Press the “menu” button to enter
Brightness
Press the “menu” button to enter.
Use the “Down” and “Up” button to adjust the brightness of the display.
Press the “menu” button to enter.
Contrast
Press the “menu” button to enter.
Use the “Down” and “Up” button to adjust the contrast of the display.
Press the “menu” button to enter.
Color
Press the “menu” button to enter, and you will see the image below.
Use the “Down” and “Up” button to adjust the color of the display.
Press “menu” to enter.

RackView Dual Rail Manual 9
Position
Press the “menu” button to enter and you will see the image below
Use the “Down” and “Up” button to scroll.
Press the “menu” button to enter.
Language
Press the “menu” button to enter and you will see:

English

German

French

Italian

Spanish
Use the “Down” and “Up” button to scroll.
Press the “menu” button
Recall
Press the “menu” button to enter, and you will see:
Yes/ No
Select “Yes” button then ‘Menu” button to recall the factory setting.
Select “No“ button to return to the previous page.
Exit
Press the “exit” button to quit the OSD menu.
Power Indicator
GREEN ON
RED STANDBY
RED SUSPEND
RED OFF
Turning on the RackView Dual Rail
Make sure all cables and the power cord are connected properly. Be sure to tighten all connector screws. Pull
the panel all the way out then lift the panel up. This will disengage the momentary on/off switch and the unit
should power on. Check that the on/off switch in the front of keyboard plate is on and the green LED on the left
side is on. Then pull the handle of keyboard tray to pull the keyboard all the way out.

RackView Dual Rail Manual 10
Testing the RackView Dual Rail
To test that the RackView is working properly, perform the following steps:
1. Power up the console, and then turn on your computer.
2. Make sure the video image is centered within the screen area Use the OSD controls to adjust the image or
press the Auto button on the left or underneath of the panel.
Configuring the Display Settings
After connecting the RackView Dual Rail console and turning on your computer, you may need to configure
one or more of the following display settings:

Display mode (also called desktop area or video resolution)

Refresh rate (also called vertical scan rate or vertical sync)

Color depth (also called color palette or number of colors)
Each video card has several controls for adjusting the display settings. However, the software and driver for
each video card is unique. In most cases, you adjust these settings by using a program or utility provided by
the manufacturer of the video card.
Most video cards use the Windows Display Properties control panel to configure the display. To open the
Windows Display Properties, click the right mouse button in a blank area of the Windows desktop and then
select Properties.
The Settings tab usually lets you change the Color Palette and the Desktop Area (x by y pixel resolution).
Some video cards integrate additional features into the Windows Display Properties control panel to give you
an exceptional setup that is flexible and easy to use. For example, the control panel may include an Advanced
Properties button, an Adjustment tab, or a Refresh tab for changing other settings. Other video cards have a
separate utility for setting display properties.
Whenever you change the resolution, color, or refresh rate, the image size, position, or shape may change.
This behaviour is normal. You can readjust the image using the panel on-screen controls.
For more information on configuring the display settings, refer to the manual that came with your video card.
You can adjust the horizontal and vertical position, contrast, and brightness to better suit your video card and
your personal preference.
Refer to the OSD section of this manual for more information on using the on-screen menu to adjust the video
display
Before you begin, make sure that electrical power to all the devices you will be connecting up has been turned
off. To prevent damage to your installation due to ground potential difference, make sure that all the devices on
the installation are properly grounded. Consult your direct reseller for any technical issues if necessary

PRODUCT SAFETY
RackView Dual Rail Manual 11
Safety
The RackView Dual Rail Drawer, like all electronic equipment, should be used with care. To protect yourself
from possible injury and to minimize the risk of damage to the Unit, read and follow these safety instructions.

Follow all instructions and warnings marked on this Unit.

Except where explained in this manual, do not attempt to service this Unit yourself.

Do not use this Unit near water.

Assure that the placement of this Unit is on a stable surface.

Provide proper ventilation and air circulation.

Keep connection cables clear of obstructions that might cause damage to them.

Use only power cords, power adapter and connection cables designed for this Unit.

Keep objects that might damage this Unit and liquids that may spill, clear from this Unit. Liquids and
foreign objects might come in contact with voltage points that could create a risk of fire or electrical
shock.

Do not use liquid or aerosol cleaners to clean this Unit. Always unplug this Unit from the power source
before cleaning.
Remove power from the unit and refer servicing to a qualified service center if any of the
following conditions occur:

The connection cables are damaged or frayed.

The Unit has been exposed to any liquids.

The Unit does not operate normally when all operating instructions have been followed.

The Unit has been dropped or the case has been damaged.

The Unit exhibits a distinct change in performance, indicating a need for service.

SERVICE AND MAINTENANCE
RackView Dual Rail Manual 12
Maintenance and Repair
This Unit does not contain any internal user-serviceable parts. In the event a Unit needs repair or maintenance,
you must first obtain a Return Authorization (RA) number from Rose Electronics or an authorized repair center.
This Return Authorization number must appear on the outside of the shipping container.
See Limited Warranty for more information.
When returning a Unit, it should be double-packed in the original container or equivalent, insured and shipped
to:
Rose Electronics
Attn: RA __________
10707 Stancliff Road
Houston, Texas 77099 USA
Technical Support
If you are experiencing problems, or need assistance installing your product, consult the appropriate section of
this manual. If, however, you require additional information or assistance, please contact the Rose Electronics
Technical Support Department at:
Phone: [phone]
E-mail: [email protected]
Web: www.rose.com
Technical Support hours are from: 8:00 am to 6:00 pm CST (USA), Monday through Friday.
Please report any malfunctions in the operation of this Unit or any discrepancies in this manual to the Rose
Electronics Technical Support Department.

APPENDICES
RackView Dual Rail Manual 13
Appendix A —Specifications
Chassis Details RackView 17" Model RackView 19" Model
Display Monitor 17" active matrix TFT LCD 19" active matrix TFT LCD
Drawer Dimensions 17.6 x 19.0 x 1.7 inch
447 x 482 x 43 mm
20.0 x 19.0 x 1.7 inch
508.8 x 482 x 43 mm
Weight 26.5 lb (12.0Kg) 27.6 lb (12.5Kg)
Mounting Rail Distance 16.5 - 32.6-inch (472-830mm). 18.9 - 35.2-inch (480-895mm)
Video Specification RackView 17" Model RackView 19" Model
Maximum Resolution 1280 x 1024 @60Hz (SXGA) 1280 x 1024 @60Hz (SXGA)
Brightness and Backlight Type 250 cd/m², Dual lamp backlight 250 cd/m², Dual lamp backlight
Color Support 16.7 million 16.7 million
Contrast Ratio (typical.) 1000:1 1000:1
Viewing Angle (H/V) Left/Right 170˚, Up/Down 160˚ Left/Right 170˚, Up/Down 160˚
Pixel Pitch 0.264 x 0.264mm 0.098 x 0.294mm
Response Time Rising: 3.8ms, Decay: 1.2ms Rising: 3.6ms, Decay: 1.4ms
Connectors and Controls
Console Ports (standard model)
(one cable included)
1 x DVI-D
1 x HD15 (VGA)
1 x USB-HID for USB keyboard and mouse
2 x PS2 for PS2 keyboard and mouse
Power 1 x IEC power connector
Keyboard and Mouse 106 key keyboard and 2-button touchpad mouse
Power
Power Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption 17" model: 9.91W, 19" model 11.03W
Environmental, Approvals, and Support
Operating Temp 0˚ to 50˚C Degree, 32˚ to 122˚F Degree
Storage Temp -20˚ to 60 ˚C Degree, -4˚ to 140˚F Degree
Operating Humidity Operating: 10~90%, non-condensing
Regulation/Approvals cUL, FCC, CE, C-Tick
Compatibility Multi-platform - Mix PCs, SUNs, IBMs, HPs and DELLs.
DOS, Unix, Linux, OSX, Windows

RackView Dual Rail Manual 14
Appendix B —Part Numbers
Part Number Description
RV1-CDKVT17/DVI 1U, 17" RackView Dual Rail, Resolution to 1280*1024 (includes one of
each, VGA/PS2, USB-AB and DVI cables (all 5ft, 1.8m)
RV1-CDKVT19/DVI 1U, 19" RackView Dual Rail, Resolution to 1280*1024 (includes one of
each, VGA/PS2, USB-AB and DVI cables (all 5ft, 1.8m)
RackView Interface Cable: (optional DVI and USB interface cables)
CAB-DVIDMM006 DVI-D extension cable, M/M, 6ft (2.0m)
CAB-DVIDMM010 DVI-D extension cable, M/M, 10ft (3.0m)
CAB-USBAB006 USB-AB extension cable, M/M, 6ft (2.0m)
CAB-USBAB010 USB-AB extension cable, M/M, 10ft (3.0m)
RackView + Integrated 8-Port DVI/USB/Audio KVM Switch
RV1-CDKVT17/KVM-8TDVI/A1 1U, 17" RackView Dual Rail with an integrated 8-port DVI/USB/Audio
KVM Switch
RV1-CDKVT17/KVM-8TDVI/A1-K6 1U, 17" RackView Dual Rail with an integrated 8-port DVI/USB/Audio
KVM Switch (includes 8 x DVI and 8 x USB-AB cables (6ft, 2.0m)
RV1-CDKVT19/KVM-8TDVI/A1 1U, 19" RackView Dual Rail with an integrated 8-port DVI/USB/Audio
KVM Switch
RV1-CDKVT19/KVM-8TDVI/A1-K6 1U, 19" RackView Dual Rail with an integrated 8-port DVI/USB/Audio
KVM Switch (includes 8 x DVI and 8 x USB-AB cables (6ft, 2.0m)
RackView Options
/KM Trackball 2-button mouse option
/nnDC 12 or 48 DC power
/A1 Analog audio
/nn Keyboard Language Option: /UK, /FR, /IT, /DN, /BE, /NO, /DE, /ES,
/PO, /SI, /SD, /DA, /JP, /TW. Add /nn to part

RackView Dual Rail Manual 15
Appendix C —RackView Dimensions
RackView Dimensions: Package Size and Weight
Model Product Dimension
(W × D × H) approx
Packing Dimension
(W × D × H) approx
Net
Weight
Gross
Weight
RackView Dual Rail 17" 17.6 x 19.0 x 1.7 inch
447 x 482 x 43 mm
23.8 x 22.0 x 8.0 inch
605 x 560 x 202 mm
26.5lbs
12.0 Kg
37.5lbs
17.0Kg
RackView Dual Rail 19" 20.0 x 19.0 x 1.7 inch
508.8 x 482 x 43 mm
26.1 x 22.2 x 7.3 inch
664 x 564 x 185 mm
27.6lbs
12.5 Kg
41.9lbs
19.0Kg
Table 1. RackView product and packaging dimensions
The above package content is only for the single RackView Dual Rail Drawer. The package size and weight
varies with options such as KVM switch, and DC power, as below.
Package Size and Weight with Internal KVM Switch
Model-with KVM Switch Product Dimension
(W × D × H) approx
Packing Dimension
(W × D × H) approx
Net
Weight
Gross
Weight
RackView Dual Rail 17"with
an internal KVM Switch
22.3 x 19.0 x 1.7 inch
567.3 x 481.9 x 44.0 mm
28.7 x 21.8 x 8.1 inch
728 x 553 x 205 mm
28.7lb
13.0Kg
43.0lb
19.5Kg
RackView Dual Rail 19"with
an internal KVM Switch
24.6 x 19.0 x 1.7 inch
628.8 x 481.9 x 44.0 mm
31.0 x 22.2 x 7.3 inch
788 x 564 x 185 mm
30.9lb
14.0Kg
47.4lb
21.5Kg
Table 2. RackView product and packaging dimensions (including a KVM switch)