Rose electronics RackView High-Resolution 17 User manual

RackView
High-Resolution 17"
Sliding
KVM Drawer - 1920 x 1200
Installation
and
Operation Manual
10707 Stancliff Road
Houston, Texas 77099
Phone: [phone]
[email protected]

LIMITED WARRANTY
Copyright Rose Electronics 2018. All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and
recording, without the prior written permission of Rose Electronics.
manual-rackview-high-res-17-2018-03-25
Rose Electronics®warrants the RackView High-Resolution 17” KVM Drawer to be in good working order for
one year from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to
be in good working order at any time during this one-year warranty period, Rose Electronics will, at its option,
repair or replace the Unit as set forth below. Repair parts and replacement units will be either reconditioned or
new. All replaced parts become the property of Rose Electronics. This limited warranty does not include
service to repair damage to the Unit resulting from accident, disaster, abuse, or unauthorized modification of
the Unit, including static discharge and power surges.
Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose
Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail,
you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the
warranty service location, and to use the original shipping container or its equivalent. You must call for a return
authorization number first. Under no circumstances will a unit be accepted without a return authorization
number. Contact an authorized repair center or Rose Electronics for further information.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A
PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS
OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE
REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE
ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST
SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR
THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER
PARTY.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS
WHICH MAY VARY FROM STATE TO STATE.

DECLARATIONS OF CONFORMITY
This is to certify that, when installed and used according to the instructions in this manual, the units listed and
described here are shielded against the generation of radio interferences in accordance with the application of
Council Directives 2014/30/EU and 2014/30/EU, as well as these standards:
■EN 55022: 2010/AC:2011 (Class B)
■EN 55024:2010 + A1:2015
This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at their own expense.
This equipment fully complies with the requirements of European Union Regulation (EC) 1907/2006
concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH):
These devices comply with Directive 2011/65/EU of the European Parliament and of the council of 8 June
2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS 2, RoHS II). The device labels carry a respective marking.

TABLE OF CONTENTS
Contents
Disclaimer 1
System Introduction 1
Features 1
Package Contents 2
RackView Options 2
RackView Model 3
RackView Layout 3
RackView Rear Panel Connector Layout 3
Installation Procedure 4
Installation of the RackView 17-inch 4
Operation of the RackView 17-inch 5
Cabling RackView to an External Device 6
Connection to a PS2 or USB Server 6
Connection to an External KVM Switch 6
RackView Cables 7
RackView Operation 8
Power-On Procedure 8
Video Input Select Button 8
OSD Selection 8
OSD Operation 9
Picture in Picture and Picture by Picture Modes (PIP and PBP) 10
Troubleshooting 11
Safety 12
Maintenance and Repair 13
Technical Support 13
Figures
Figure 1. RackView product layout - key features 3
Figure 2. RackView rear panel connector layout 3
Figure 3. RackView installation procedure 4
Figure 4. RackView console drawer operation 5
Figure 5. RackView cable connectivity 6
Figure 6. RackView device interface cables 7
Figure 7. Connection showing 3 external devices connected to RackView FH 7
Figure 8. OSD menu selection 8
Figure 9. RackView OSD configuration and settings 9
Figure 10. PIP and PBP configuration 10
Figure 11. PIP and PBP settings and operation 11
Figure 12. RackView chassis dimensions 16
Figure 13 RackView integrated KVM switch models 17
Figure 14. RackView with HDMI video option 18
Figure 15. HDMI cable connection 18
Figure 16. RackView with 3G/HD/SD-SDI video option 18
Figure 17. RackView with a DC power connector fitted 20

TABLE OF CONTENTS
Tables
Table 1. RackView product and packaging dimensions ................................................................... 16
Table 2. RackView product and packaging dimensions (including a KVM switch)............................. 16
Table 3. Video resolution related to LCD specification .................................................................... 17
Table 4. DVI-D and VGA video formats............................................................................................ 19
Table 5. 3G/HD/SD-SDI video formats ............................................................................................ 19
Table 6. RackView DC power options.............................................................................................. 20
Appendices
Appendix A —Specifications 14
Appendix B —Part Numbers 15
Appendix C —RackView Dimensions 16
Appendix D —RackView with Integrated KVM Switch 17
Appendix E —RackView Video Options 18
Appendix F —RackView DC Power Options 20

INTRODUCTION
RackView High-Resolution 17" Manual 1
Disclaimer
While every precaution has been taken in the preparation of this manual, the manufacturer assumes no
responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting
from the use of the information contained herein. The manufacturer reserves the right to change the
specifications, functions, circuitry of the product, and manual content at any time without notice.
The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances
outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury
arising directly or indirectly from the use of this product (See limited warranty).
System Introduction
Thank you for choosing the Rose Electronics RackView High Resolution 17" Console Drawer. This product is
the result of Rose Electronics’ commitment to providing state-of-the-art solutions for today’s demanding
workplace. The RackView is the ideal product for managing one or more PC’s/Servers in a confined rack
space.
The RackView is manufactured using a steel chassis to withstand constant mechanical movement in the rack.
The 17" LCD monitor supports 1920×1200 video resolution, with both VGA and DVI video interfaces available.
The keyboard tray includes a 2-button touchpad mouse, and either a PS2 or USB connector is available for
keyboard and mouse operation, via an external interface cable.
There are several options available with the RackView, including the integration of a VGA/USB or DVI/USB
KVM switch for PC/Server management, providing an all-in-one console management solution.
The instructions in this manual assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding video display device operation.
Features
■1U model with 17" TFT/LCD monitor
■17" Ultra high-resolution resolution up to 1920 x 1200, VGA or DVI
■Front panel controls provide access to the OSD for set-up and quick adjustments of
color, brightness, contrast, position, and shape of the display
■USB or PS/2 touchpad/keyboard interface
■Full size 104 keyboard with a separate numeric keypad and a 2-button touchpad mouse
■Supports Windows, Linux, Unix, Sun, MAC OS
■Panel protected by tempered glass
■Active EDID monitor function
■Quick and easy “one-man” rack mounting installation, the RackView drawer can be mounted at any height
in a standard 19" rack
■Fold and tilt the LCD Monitor for optimum viewing position
■18 International keyboard versions available
■Mounting rails included
■Optional DVI/USB or VGA/USB KVM Switch

RackView High-Resolution 17" Manual 2
Package Contents
The RackView package contents consist of the following:

1 x RackView sliding KVM drawer

1 x Mounting bracket (sliding rails) set

1 x Set of screws/washers for assembly

1 x Combo interface cable (depending on the model selected)

1 x Power supply unit

1 x Power cable

1 x Manual
The above package content is only for the single console model. The contents can vary with options such as a
KVM switch, HDMI and 3G/SDI video and DC power.
Additional cables are usually ordered separately. If the package contents are not correct, contact Rose
Electronics or your reseller so the problem can be quickly resolved.
RackView Options

Integrated KVM switch, DVI USB Audio (12 port) or VGA USB (8 or 16 port)

HDMI (replaces the DVI interface)

3G/HD/SD-SDI video

PIP and PBP display options

Front USB 2.0 port for device access, available with the KVM-Hub switch option only

Trackball mouse

DC power, 12, 24, 48, 125, 250V
Before Installation
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the mounting location has good ventilation, is out of direct sunlight, and away from sources of
excessive dust, dirt, heat, water, moisture, and vibration.

MODELS
RackView High-Resolution 17" Manual 3
RackView Model
The RackView is available as described below.
RackView Layout
RackView High-Resolution 17-inch color LCD
Figure 1. RackView product layout - key features
RackView Rear Panel Connector Layout
The RackView rear panel includes an HD15(KVM) and DVI-D connector as standard. The HD15(KVM)
connector supports VGA video, and also the keyboard/mouse interface.
This diagram shows the approximate positioning of the DVI-D and KVM connectors on the rear panel.
Figure 2. RackView rear panel connector layout

INSTALLATION
RackView High-Resolution 17" Manual 4
Installation Procedure
Installation of the RackView 17-inch
Step 1
Insert the Left and Right rear-mounting slides into
the RackView Console Drawer
Step 2
Measure the depth of the front and rear rack rails
Align each rear-mounting slide to a suitable length
(depth)
Step 3
Complete the Installation
Fix the RackView Console Drawer into the Rack
A set of mounting accessories is provided
Figure 3. RackView installation procedure

RackView High-Resolution 17" Manual 5
Operation of the RackView 17-inch
Step 1
Hold the handle and slide out the RackView drawer
Step 2
Flip up the LCD to a suitable viewing angle
Step 3
Operate the RackView Console Drawer
Figure 4. RackView console drawer operation

RackView High-Resolution 17" Manual 6
Cabling RackView to an External Device
Connection to a PS2 or USB Server
Connection to an External KVM Switch
Figure 5. RackView cable connectivity
Note: Cabling options include either a VGA/USB, a VGA/PS2, or a DVI/USB cable.
Note: Please check cable details with your supplier.
Caution: The RackView KVM drawer is hot-pluggable, but components of connected devices, such as the
servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM
switch are powered-on may cause irreversible damage to the servers, KVM and LCD console drawer. Before
attempting to connect anything to the RackView, we suggest turning off the power to all devices. Apply power
to connected devices only after the RackView has been powered-on. Rose Electronics is not responsible for
any product damage or warranty claims caused in this way.

RackView High-Resolution 17" Manual 7
RackView Cables
There are 3 different combo connection cables available for RackView. The user should select one of these
cables at time of order placement. These cables are used to connect the RackView to either a PC or an
external KVM switch
Add either /K1, /K2 or /K3 onto the RackView part number
K1: VGA + USB K2: VGA + PS2
K3: DVI + USB
Figure 6. RackView device interface cables
The RackView can support 4 different video interfaces, VGA, DVI-D, and the optional HDMI and 3G-SDI.
Under the PIP function, the user can view two different signal inputs on the monitor, typically selected from the
VGA, DVI-D and HDMI video sources.
With the HDMI option installed, the RackView can be cabled to 3 different video sources as shown below.
Figure 7. Connection showing 3 external devices connected to RackView FH
LCD Console Drawer
HDMI
DVI
VGA
HDMI
Player
PC
DVI-D
USB
Server
KB/
MS
VGA

OPERATION
RackView High-Resolution 17" Manual 8
RackView Operation
Power-On Procedure

Power on the RackView (see power switch on back panel)

Power on the KVM Switch or other connected product

Power on the CPU
Video Input Select Button

The RackView remembers the last valid video input selection, so if the CPU input has changed, the user
needs to re-select the video input.

Locate the “Video Input Select” button on the OSD display control panel

Push the Video Input Select button to toggle between VGA and DVI Input

Select the appropriate Video Input format (VGA or DVI)
OSD Selection
OSD Selection Panel
Figure 8. OSD menu selection

RackView High-Resolution 17" Manual 9
OSD Operation
OSD Configuration and Settings
Picture
Picture mode: Standard / Vivid / Soft / User mode to choose
Brightness: Adjust background black level of the screen image
Contrast: Adjust the difference between the image background
(black level) and the foreground (white level)
Hue: Adjust the screen hue value
Saturation: Adjust the saturation of the image color
Picture size: Adjust the image size
Color temp: Standard / Cool / Warm / User to choose
Noise reduce: Reduce the noise of the image
Sharpness: Adjust the image from weak to sharp
PC
Auto adjust: Automatically adjust sizes, centers and fine tunes
the video signal to eliminate waviness and distortion.
Clock: Adjust the clock value
Phase: Adjust the phase value
H. Position: Align the screen image left or right
V. Position: Align the screen image up or down
Audio
Audio mode: Movie / Voice / Normal / Music mode to choose
Volume: Adjust the volume of sound
Bass: Set the value of bass sound
Treble: Set the value of treble sound
Balance: Set the balance value of treble and bass sound
Analog TV audio: Set the value of analog TV audio sound
Mute: Turn off the surrounding sound
Misc.
Language: Select the language in which the OSD menu is
displayed - English
Sleep timer: Set the off time
PIP mode: Adjust picture in picture setting
PIP position: Enter into PIP position
PIP source: Enter into the Sub source and sound source
System reset: Return the adjustment back to factory setting
Information: Select for Help
Figure 9. RackView OSD configuration and settings

RackView High-Resolution 17" Manual 10
Picture in Picture and Picture by Picture Modes (PIP and PBP)
PIP (Picture-In-Picture) and PBP (Picture-By-Picture) settings are available when two different video sources
are selected in the MISC option in the OSD.
PIP and PBP Settings
PIP Mode
Display the Sub screen in the Main screen.
OSD Menu →MISC →PIP Mode →Large / Small /
OFF
PIP Position
Adjust the position of the Sub screen (top left,
bottom left, top right, bottom right)
OSD Menu →MISC →PIP Position →top left / top
right / bottom left / bottom right
PIP Size
Adjust the size of the Sub screen (Large / Small)
OSD Menu →MISC →PIP Mode →Large / Small
PBP Mode
Display the Sub screen next to the Main screen.
OSD Menu →MISC →PIP Mode →PBP
Figure 10. PIP and PBP configuration

RackView High-Resolution 17" Manual 11
PIP and PBP Operation
PBP Size
Adjust the size of the Sub-screen (Large/Small)
OSD Menu --- MISC --- PBP Mode --- Large/Small
PIP / PBP Source
To select an input signal for PIP / PBP Sub screen.
OSD Menu →MISC
Figure 11. PIP and PBP settings and operation
Troubleshooting
If the RackView KVM Drawer fails to synchronize correctly with the attached product (PC, Switch, Extender),
and the monitor displays a distorted video pattern, press the screen power reset button once on the RackView
keyboard tray to re-synchronize the video signal

PRODUCT SAFETY
RackView High-Resolution 17" Manual 12
Safety
The RackView KVM Drawer, like all electronic equipment, should be used with care. To protect yourself from
possible injury and to minimize the risk of damage to the Unit, read and follow these safety instructions.

Follow all instructions and warnings marked on this Unit.

Except where explained in this manual, do not attempt to service this Unit yourself.

Do not use this Unit near water.

Assure that the placement of this Unit is on a stable surface.

Provide proper ventilation and air circulation.

Keep connection cables clear of obstructions that might cause damage to them.

Use only power cords, power adapter and connection cables designed for this Unit.

Keep objects that might damage this Unit and liquids that may spill, clear from this Unit. Liquids and
foreign objects might come in contact with voltage points that could create a risk of fire or electrical
shock.

Do not use liquid or aerosol cleaners to clean this Unit. Always unplug this Unit from the power source
before cleaning.
Remove power from the unit and refer servicing to a qualified service center if any of the
following conditions occur:

The connection cables are damaged or frayed.

The Unit has been exposed to any liquids.

The Unit does not operate normally when all operating instructions have been followed.

The Unit has been dropped or the case has been damaged.

The Unit exhibits a distinct change in performance, indicating a need for service.

SERVICE AND MAINTENANCE
RackView High-Resolution 17" Manual 13
Maintenance and Repair
This Unit does not contain any internal user-serviceable parts. In the event a Unit needs repair or maintenance,
you must first obtain a Return Authorization (RA) number from Rose Electronics or an authorized repair center.
This Return Authorization number must appear on the outside of the shipping container.
See Limited Warranty for more information.
When returning a Unit, it should be double-packed in the original container or equivalent, insured and shipped
to:
Rose Electronics
Attn: RA __________
10707 Stancliff Road
Houston, Texas 77099 USA
Technical Support
If you are experiencing problems, or need assistance installing your product, consult the appropriate section of
this manual. If, however, you require additional information or assistance, please contact the Rose Electronics
Technical Support Department at:
Phone: [phone]
E-mail: [email protected]
Web: www.rose.com
Technical Support hours are from: 8:00 am to 6:00 pm CST (USA), Monday through Friday.
Please report any malfunctions in the operation of this Unit or any discrepancies in this manual to the Rose
Electronics Technical Support Department.

APPENDICES
RackView High-Resolution 17" Manual 14
Appendix A —Specifications
Chassis Details
Display Monitor 17.1" High Resolution TFT Color LCD, 1U height
Drawer Dimensions 17.4 x 18.9x 1.73 inch (441.6 x 480 x 44 mm)
Weight 24 lb (10.9Kg)
Display Size 17.1 inch
Mounting Rail Distance 19.3 – 28.3 inch (490-720mm)
Video Specification
Maximum Resolution 1920 x 1200 @60Hz, WUXGA
Brightness and Backlight Type 210 cd/m², LED
Color Support 16.7M, 8-bit
Contrast Ratio (typical.) 600:1
Viewing Angle (H/V) 65/65/55/55 (L/R/U/D)
Dot Pitch 0.191mm
Display Area 367.20 H x 229.5 V mm
Response Time 30ms
Surface Treatment Anti-glare, hard coating
Surface Hardness 3H
DVI Signal DVI-D, TMDS single-link
HDMI Signal HDMI 1.3, CEA-861-D
VGA Signal Analog 0.7Vp-p
Sync. Type (VGA) Separate, Composite and Sync-On-Green
Plug & Play DDC (DVI and VGA) VESA EDID 1.3
Connectors and Controls
Console Ports (standard model)
(one cable included)
1 x DVI-D
1 x KVM (for VGA video, keyboard and mouse signals)
Power 1 x IEC power connector
Display power switch 1 x Display power-off switch on the front panel
USB2.0 1 x USB2.0 port on the front panel with the USB-Hub switch option
Power
Power Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption Screen ON = 34W or less, Power Saving Mode = 4W or less
Environmental, Approvals and Support
Operating Temp 0˚ to 55˚C Degree
Storage Temp -20˚ to 60 ˚C Degree
Operating Humidity Operating: 20~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random vibration
Regulation/Approvals cUL, FCC, CE, RoHS2, REACH
Compatibility Multi-platform - Mix PCs, SUNs, IBMs, HPs and DELLs.
LCD Panel MTBF 20,000 hours

RackView High-Resolution 17" Manual 15
Appendix B —Part Numbers
Part Number Description
RV1-CAKVT17/FHD/Kn RackView High Resolution 17", 1920 x 1200 Ultra HD, KVM Rack Drawer,
Touchpad Mouse, (for Kn, see cables below)
RackView Interface Cable: (only 1 cable is included – select with order). For above model only
/K1: CAB-CMBVMUAC005: HD15 to HD15 + 1 x USB-A. (VGA +USB)
/K2: CAB-CMBVM66C005: HD15 to HD15 + 2 x PS2. (VGA +PS2)
/K3: CAB-CMBDVUAC005: DVI-D + HD15(M) to DVI-I + 1 x USB-A
RackView + KVM Switch
RV1-CAKVT17/FHD/KVM12TDVI-K1 RackView High Resolution 17" with 12-port DVI/USB KVM Switch + 6 x
DVI/USB 6ft cables
RV1-CAKVT17/FHD/KVM108CMB-K1 RackView High Resolution 17" with 8-port VGA/USB KVM Switch + 8 x
VGA/USB 6ft cables
RV1-CAKVT17/FHD/KVM116CMB-K1 RackView High Resolution 17" with 16-port VGA/USB KVM Switch + 16 x
VGA/USB 6ft cables
RV1-CAKVT17/FHD/KVM108CMH-K1 RackView High Resolution 17" with 8-port VGA/USB KVM Switch + 8 x
VGA/USB 6ft cables, with a 2-port USB2.0 Hub
RV1-CAKVT17/FHD/KVM116CMH-K1 RackView High Resolution 17" with 16-port VGA/USB KVM Switch + 16 x
VGA/USB 6ft cables, with a 2-port USB2.0 Hub
Additional CPU cables for KVM Switch
CAB-CMBVMUAC006 CPU Cable, 6ft (2.0m) cable, Combo HD15 to VGA/USB
CAB-CMBVMUAC010 CPU Cable, 10ft (3.0m) cable, Combo HD15 to VGA/USB
CAB-CMBVMUAC015 CPU Cable, 15ft (4.5m) cable, Combo HD15 to VGA/USB
CAB-CMBDVUAC006 CPU Cable, 6ft (2.0m), DVI-D + Audio + USB-A to DVI-D+USB-B, (for DVI
Switch)
CAB-CMBDVUAC015 CPU Cable, 15ft (4.5m), DVI-D + Audio + USB-A to DVI-D+USB-B, (for
DVI Switch)
RackView Options
/HM HDMI video with audio
/SD 3G/HD/SD-SDI video
/KM Trackball 2-button mouse option
/nnnDC 12/24/48/125/250V DC power
/nn Keyboard Language Option: /UK, /FR, /IT, /DN, /BE, /NO, /DE, /ES, /PO,
/SI, /SD, /DA, /JP, /TW. Add /nn to part