Rosewill RC-305E User manual

Serial PCI Express Card 4 Ports RC-305E
User Manual

SERIAL PCI Express Card 4 Ports RC-305E UserManual
1
Features and Benefits
Features Compliant with PCI Express Base Specification 1.1
Supports 4 x UART serial port
Built-in 16C450/550 compatible UART
On chip 256 byte FIFOs in transmit and receive path of each
serial port
Data transfer rate up to 230400bps
Bus PCI-Express x1
Connectors 4 x DB9 male serial connectors
System Requirements
Windows® XP/Vista/7 (32/64 bit)
PCI Express-enabled system with an available PCI Express slot
Package Contents
1 x PCIe Serial Card 4 Ports
1 x Bracket with two DB9 male serial ports
1 x Driver CD
1 x User Manual
Hardware Installation
1. Turn off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on
the motherboard. Push the board down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.

SERIAL PCI Express Card 4 Ports RC-305E UserManual
2
Driver Installation
1. Insert the included setup CD in your CD-ROM drive.
2. On your desktop, click “Start” then “Run”.
3. When the prompt displays
•For Windows XP 32-bit – Enter “D:\RC-305E\XP\Win32\stnsetup.exe” (where “D” is the
designation of your CD drive)
•For Windows XP 64-bit – Enter “D:\RC-305E\XP\Win64\stnsetup.exe” (where “D” is the
designation of your CD drive)
•For Windows Vista 32-bit – Enter “D:\RC-305E\Vista\Win32\stnsetup.exe” (where “D” is
the designation of your CD drive)
•For Windows Vista 64-bit – Enter “D:\RC-305E\Vista\Win64\stnsetup.exe” (where “D” is
the designation of your CD drive)
•For Windows 7 32-bit – Enter “D:\RC-305E\7\Win32\stnsetup.exe” (where “D” is the
designation of your CD drive)
•For Windows 7 64-bit – Enter “D:\RC-305E\7\Win64\stnsetup.exe” (where “D” is the
designation of your CD drive)
4. Follow any on-screen instructions to complete the driver installation.
5. Restart your computer. Once you’ve re-booted, the adapter is ready for use.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and future support for your
product.