Rosewill RMS-SWM01 User manual

RMS-SWM01 Wall Mount Installation Guide
Rosewill Technical Support information
1-800-575-9885 Monday - Friday 8AM - 5PM PST
[email protected]

ENGLISH
Index
1 Package Contents ...................................................... 1
2 Installation.............................................................2~10
3 Installation Guide for VESA...............................11~13
1 Contenu de la boîte .................................................. 14
2 Installation...........................................................16~23
3 Moniteur VESA trous..........................................24~26
1 Contenido del paquete............................................. 27
2 Instalación...........................................................29~36
3 Monitor VESA agujeros......................................37~39
SPANISH
FRENCH
RMS-SWM01 Wall Mount Installation Guide

1
RMS-SWM01 Wall Mount Installation Guide
Part No. Part Qty. Sub-Part No. Sub-part Qty. Description
N/A
1 1 1 Arm Set
1 2 1 Wall Mount Set
1 3 1 Mounting Plate
Package Contents
ENGLISH
3
2
1

2
RMS-SWM01 Wall Mount Installation Guide
Part No. Part Qty. Sub-Part
No. Sub-part Qty. Description
A-1 1
A-A 1 3mm Allen Wrench
A-B 1 Adjustable Wrench
A-C 1 5mm Allen Wrench
A-D 1 Torx Tool
A-2 1A-E 2 Monitor Screw
A-3 1 A-F 1 Access Card
B-1 1
B-A 2 Lag Bolt (8mmx65mm)
B-B 2 Steel Washer (Ø8.5 x Ø18 x 1.5T)
B-2 1 B-C 2 10D Anchor (Ø8 mm x Ø10 mm)
C-1 1
C-A 1 Fixed Clip
C-B 1 M6 x 5mm Socket Set Screw
C-C 1 Adjustable Arm Sleeve
D-1 1 D-A 4 Plastic Pad

3
RMS-SWM01 Wall Mount Installation Guide
Carefully place the computer faced down on a flat surface to ensure not to scratch the display
with the stand hanging over the edge. Lift the stand up to its highest point. Insert A-F card at
slight upward angle until you feel the latch.
Step 1 :
Original iMac stand
A-F
A-D
Installation
With the card in the slot, lower the stand until it is as far down as it can be (you will see screws).
Separate the stand from iMac monitor by using A-D tool, and set the original M3 screw 8 pcs
aside carefully.
Step 2 :

4
RMS-SWM01 Wall Mount Installation Guide
Fasten the mounting plate on the iMac monitor by using the M3 screws.
Install D-A into four holes at the corners of 1.
Step 3 :
Step 4 :
3
1
D-A L
S
A-D
iMac Monitor Original M3 screws x 8
# Use A-D tool to
fasten M3 screws
L toward outside

5
RMS-SWM01 Wall Mount Installation Guide
Fasten the arm set onto the mounting plate by using A-E screws.
Step 5 :
3
1
# Use A-C wrench for A-E screws
A-C
A-E

6
RMS-SWM01 Wall Mount Installation Guide
Mark the holes of the wall mount set on the concrete wall. (Hole distance: 152mm)
Drill Ø 3/8" (10 mm) holes about the depth of 60mm on the wall.
Insert B-C anchors into the holes.
Screw the wall mount set on the wall with B-A bolts and B-B washers.
# Install 2 on wood wall.
Drill Ø 7/32" (5 mm) holes about the depth of 60mm on the wall. There is no need to use B-C.
Step 6 :
Step 7 :
Step 8 :
Step 9 :
B-C
B-B
Wall
152
B-A
2

7
RMS-SWM01 Wall Mount Installation Guide
Insert C-A clip into the curved notch of the arm set.
Install C-C sleeve into the hole of the arm set. (Note the sleeve gap location)
Set the arm set into the wall mount set, and tighten the arm set with C-B screw.
Step10 :
Step 11 :
Step 12 :
C-B
The gap should be on the
opposite side to C-A clip
C-A
C-C
A-A
1
2

8
RMS-SWM01 Wall Mount Installation Guide
Note :
After installation, please use A-B wrench to adjust the spring adjusting block tension
based on the weight of the monitor. “H” is provided for the heavy monitor and “L” is
provided for the light monitor.
Spring adjusting block.
A-B
A-B
1

9
RMS-SWM01 Wall Mount Installation Guide
※The distance of the arm extension is depending on the spring tension adjusted for different
weights of monitors.
[23.6~26.4±0.2]
600~670±5mm
[11.2~13.4±0.2]
285~340±5mm
[27.6±0.1]
700±2mm
[21.3~23.6±0.2]
540~600±5mm
[5.118±0.197]
130±5mm

10
RMS-SWM01 Wall Mount Installation Guide
Monitor Compatibility:
Thunderbolt Display.
360o
180o
180o
180o
90o
45o
# Below angles are estimated for general monitors.
Actual angles would depend on the monitor in use.

11
RMS-SWM01 Wall Mount Installation Guide
Installation Guide for VESA
Part No. Part Qty. Sub-Part
No. Sub-part Qty. Description
N/A 1 4 1 VESA Mounting Plate
D-1 1
D-A 4 M4 x 15mm Philips Screw
D-B 4 M4 x 30mm Philips Screw
D-2 1
D-C 4 M5 x 15mm Philips Screw
D-D 4 M5 x 30mm Philips Screw
D-3 1
D-E 4 5mm Spacer
D-F 4 10mm Spacer

12
RMS-SWM01 Wall Mount Installation Guide
Use D-1 or D-2 screws for part 4, and use D-3 5mm or 10mm spacers between part 4 and
the monitor. (Due to the various depths of the VESA holes, please determine and select
the suitable spacers and screws to use)
Step 1 :
4
Part No. D-1 or D-2
(Selective based on the monitor holes)
Part No. D-3
(Selective based on the monitor holes)
Monitor
Monitor VESA holes

13
RMS-SWM01 Wall Mount Installation Guide
Fasten the 1 onto the 4 by using A-F screws.
Step 2 :
4
1
#Use A-D wrench for A-F screw
A-F
A-D

14
RMS-SWM01 Wall Mount Guide d'installation
No. pièce Qté no. pièce No. sous-pièce Qté sous-pièce Description
N/A
1 1 1 Jeu de bras
121Jeu de montage
mural
1 3 1 Plaque de montage
Contenu de la boîte
FRENCH
3
2
1

15
RMS-SWM01 Wall Mount Guide d'installation
No.
pièce Qté no. pièce
No.
sous-
pièce
Qté
sous-
pièce Description
A-1 1
A-A 1 Clé Allen 3mm
A-B 1 Clé à molette ajustable
A-C 1 Clé Allen 5mm
A-D 1 Clé Torx
A-2 1A-E 2 Vis de moniteur
A-3 1 A-F 1 Carte d'accès
B-1 1
B-A 2 Tire-fond (8mmx65mm)
B-B 2 Rondelle en acier (Ø8.5 x Ø18 x
1.5T)
B-2 1 B-C 2 10D Ancre (Ø8 mm x Ø10 mm)
C-1 1
C-A 1 Abrazadera de fijación
C-B 1 Tornillo con encastre M6 x 5 mm
C-C 1 Manguito del brazo ajustable
D-1 1 D-A 4 Tampon en plastique

16
RMS-SWM01 Wall Mount Guide d'installation
Placer délicatement l'ordinateur face vers le bas sur une surface plane afin de s'assurer de
ne pas rayer l'écran avec le support suspendu au-dessus du bord. Soulevez-le à son point
culminant. Insérer la carte A-F légèrement vers l'angle du haut jusqu'à ce que vous sentiez le
verrou.
Étape 1 :
Original support iMac
A-F
A-D
Installation
Avec la carte dans la fente, abaisser le support jusqu'à ce qu'il soit aussi loin que possible (vous
verrez les vis). Séparer le socle du moniteur iMac en utilisant l'outil A-D, et placer les 8 vis
originales M3 sur le côté avec soin.
Étape 2:

17
RMS-SWM01 Wall Mount Guide d'installation
Fixer la plaque de montage sur le moniteur iMac à l'aide des vis M3.
Installer D-A dans les quatre trous au niveau des coins de 1.
Étape 3 :
Étape 4 :
3
1
D-A L
S
A-D
iMac moniteur Original M3 vis x 8
# Utiliser l'outil A-D
outil pour f ixer
les vis M3
L vers l'extérieur

18
RMS-SWM01 Wall Mount Installation Guide
Fixer le jeu de bras sur la plaque de montage à l'aide de la vis A-E
Étape 5 :
3
1
# Utiliser la clé A-C pour la vis A-E
A-C
A-E