Rosle Biber Brush 22 User manual

Transport and storage
• Secure the appliance when transporting.
• For transporting, the appliance should be switched off and stowed in the packing provided.
• The battery and the charging unit should be stored in a dry place, free of damp and safe from frost.
• The battery should not be stored in a place where there may be electrostatic activity. The battery should
never be stored in a metal box.
• The battery and the charging unit should be stored where there is a temperature of between 5 and 45
°C and where they are not exposed to sunlight.
• Make sure the appliance is stored in a lockable room where children and unauthorized persons do not
have access.
• Before storing for a long period, make sure that the appliance is thoroughly cleaned and has undergone
complete maintenance and that the battery is fully charged.
• Always recharge the battery every time after use!
Problem solving if the brush does not work:
Th battery is not charged
The plugs are not correctly connected
The battery is not switched on
The battery may only be used in an environment with temperatures between -10 °C and 40 °C.
Power overload, check that the supply voltage is the same as that shown on the identication plate on the appliance.
Disposal of the battery, charging unit and the appliance:
The symbol on the appliance or the packaging indicates that this product cannot be disposed of with
normal household refuse. Disposal should be carried out at a recycling centre for electrical and electronic
equipment.
Technical data Biber Brush 22:
Motor 200 W, BLDC 24 V
Rotational speed of the rotating brush 120 U/min
Cleaning width Ø 250 mm
Weight of the brush 3,7 kg without battery, battery weight 2 kg
Battery running time, depending on workload approx. 4 h
Battery type: Lithium-Ion, battery capacity 10 Ah, 24 V
Power supply for the charging unit, 220-240 V, 50 Hz
EG declaration of conformity
The Rössle Bau- und Natursteine AG,
Johann-Georg-Fendt-Str. 50
D-87616 Marktoberdorf
Germany
hereby declares, that the Bisam Brush 44 meets the demands
of the following directives:
Machines directive 2006/42/EG,
low voltage directive 2006/95/EG.
Batteries and rechargeable batteries together with used
batteries and used rechargeable batteries 2006/66/EG.
EN 60335-1, EN 60335-2-67, EN 62133, EN 60335-2-29
Signed: ______________________
Name of the signatory Hubert Rössle
Function of the signatory: Director
Datum / Date: 10.02.2016
Name of the authorized representative
for the technical documents:
Rössle Bau- und Natursteine AG
Johann-Georg-Fendt-Str. 50
D87616 Marktoberdorf, Germany
Biber-Brush 22
Biber-Brush 22
Operating instructions
Dear customer!
Congratulations on the purchase of this product!
Please remember to keep these operating instructions in a safe
place. By closely following the information contained (use, service,
maintenance etc.) you will extend the working life of the appliance
considerably. The Rössle Bau- und Natursteine AG is continually
working to develop and improve their products and therefore reserves
the right to make any changes without previous notice, for example in
matters of form and appearance.
This product meets the current CE regulation standards.
Read the operating instructions carefully and make
sure you understand them before using the appliance.
• Before performing any maintenance work always turn off the battery.
• Before using the appliance, it should be carefully checked for any
signs of wear or damage and, if necessary, repaired.
• Before using the appliance, check it over completely.
• The appliance is only designed for use in cleaning ponds. It should
only be used with the original cylindrical brushes. Use the Bisam
Brush only for the purpose intended.
• The appliance should not be used by persons (including children) who
have a reduced physical, sensorial or mental capacity or who do not possess the necessary experience
or knowledge unless they are supervised while working by a person responsible for their safety who has
been instructed on using the appliance. Never let children play with the appliance.
• Hands and feet should be kept away from the working area.
• Wear the correct clothing. Never wear loose clothing or jewellery. Keep hair, clothing and gloves away
from the moveable parts. Loose clothing, jewellery or long hair can get caught up in the moving parts.
• Never work with an appliance which has been modied without the agreement of the manufacturer
and no longer matches the original appliance. The appliance should never be used near explosive or
inammable materials.
• Before starting work, all covers, protective devices and handles should be attached.
It is impossible to list all conceivable situations which could arise while using the appliance. Always
proceed with reasonable care. All the generally laid down regulations concerning the use of electrical
equipment apply. In addition, please note the following points.
This section explains the safety regulations applying to the battery and the charging unit.
For Rössle products, you should only use the original Bisam batteries. These should only be charged
using the original charging unit.
The rechargeable Li-ion batteries should only be used to provide power for the cordless Bisam Brush. In
order to avoid injury, the battery should not be used to provide power for other equipment.
Biber-Brush 22

WARNING! The battery should be protected against direct sunlight, heat or open  ame. The battery
could explode if thrown into an open  re. There is a danger of  re or acid burns. WARNING! Avoid any
contact with battery acid. Battery acid can cause skin rash and burns. If battery acid should come into con-
tact with your eyes, do not rub them. Rinse your eyes with plenty of water for 15 minutes. Visit a doctor. If
there is contact with your skin, wash the area with plenty of water and soap.
WARNING!! The battery should never come into contact with keys, coins, screws or other metal
objects as this could lead to a short circuit in the battery. Do not introduce any objects into the ventilation
holes of the battery.
Batteries which are not in use should be kept away from metal objects such as nails, coins and jewellery.
Do not attempt to open up the battery or take it apart..
• The battery may only be used in an environment with temperatures between -10 °C and 40 °C.
• The battery should not be exposed to microwaves or high pressure.
• The battery and the charging unit should never be cleaned using water.
• Keep the battery away from children.
• Protect the battery from rain and moisture.
• The charging unit should not be covered over. If smoke or  re develops, the plug for the charging unit should be
removed from the socket immediately, Be aware of the danger of  re!
• Check regularly to make sure that the connection cable for the charging unit is intact and has no cracks.
• Never carry the appliance using the cable and never remove the plug from the socket by pulling on the cable.
• The charging unit should only be used when the surrounding temperature is between 5 and 40 °C.
• Only use the charging unit in a well aired, dry and dust-free environment.
Battery status
All 3 LEDs are alight: Fully charged (75-100 %).
LED 1 and LED 2 are alight: The battery is 25-50 % charged.
LED 1 is alight: The battery is 0-25 % charged. Recharge the battery.
Warning! Please remember to store the Li-Ion battery pack only when it is fully
charged and recharge it again at the latest after 2 months.
Charging the Li-Ion battery
First turn the switch on the battery unit to Pos. 0, then connect the plug on the charging cable to the socket
provided (DC Input) and connect the charging unit to the mains. The control lamp on the battery will show
red, as will the LED on the power supply unit during charging operations. When the LED on the power unit
changes to green, the battery is full.
Battery charging unit
Make sure that the cable is not damaged.
Lithium-Ion batteries can be charged whatever their charge level. The charging operation can be started
or interrupted whatever the charge level of the battery. This does not damage the battery in any way. A
fully loaded battery will keep its charge even if the battery is left in the charging unit. The battery cannot be
loaded if its temperature is higher than 50 °C.
Checks before starting cleaning
• Make sure the brush can rotate easily.
• Remove any weed, string or similar material which may be tangled in the brush, turning off the battery
beforehand.
• Check that the appliance is in good condition.
• Before starting up the appliance, all casings should be correctly attached and in perfect condition.
• Only use the appliance for the tasks for which it is intended.
• Make sure you are standing in a safe position and can keep your balance.
• Always use both hands when operating the appliance.
• Never put the appliance down until you have turned it off.
• If you encounter a foreign body or the appliance starts to vibrate, lay it to one side. Switch off the appli-
ance and the battery before removing any material which may be tangled in
the brush. Otherwise, there is danger of injury!
Attaching the brush head to the telescopic rod
When attaching,  rst pay attention to the spiral cable  xed to the end of the rod
by a velcro fastener. Whatever you do, do not let go of the cable while loosening
the velcro strip and screw the plug into the socket on the brush immediately.
If you let go of the cable too soon, it will slip back into the rod and is almost
impossible to retrieve!
After connecting the cable, push the Bisam Brush adaptor with the cable into the
telescopic rod and make it fast with the two screws. Keep the velcro strip and
when detaching the cable,  x it back to the rod as it was originally.
Working with the Biber-Brush
Put together the Biber brush as shown in Abb.1 and connect it to the suction
hose of the suction cleaner
Place the circular brush on the pond wall, activate the forward/backward switch
and switch on the suction cleaner. The brush is guided by hand using the teles-
copic rod. The rotating movement automatically pulls the brush against the wall
surface. Working on coarse surfaces wears out the brush more quickly, so use
the correct hardness of brush depending on the surface to be cleaned. The circular brush should not be
pressed hard down onto the surface being cleaned as this can result in damage to the motor or gears or to
the pond foil.
Changing the brush
Take very great care before you start, to turn the main
switch on the battery pack to position 0. Press the circular
brush in the direction 1 using a slotted screwdriver and
pull on the brush. To attach the brush, simply press it into
position until it clicks into place.
Servicing and maintenance
WARNING! Before performing any maintenance work,
always switch off the battery.
Clean the appliance after using. If the battery plug on the
appliance is dirty, clean it with compressed air or a soft
brush.
Clean the outside surfaces of the appliance with a clean dry cloth. Never use water near the switches and
on the battery unit.
Keep the handles dry and clean from oil and grease.
Make sure that the On/Off switch is working properly and is not damaged.
Check that the battery is not damaged, check the charge level of the battery.
Check that the charging unit is not damaged and in working order.
Check that the carrying case is not damaged.
Make sure that all connections and cables are clean and intact.
Biber-Brush 22 Biber-Brush 22