Rotel RSP-1098 Installation manual

RSP 1098
RS232 Controller Command List
Table: RSP 1098 Waveform format expected:
Baud Rate Parity Valid Data Bits Stop Bit Value Handshaking Data Type
19200 N 8 1 None String
Table: RSP 1098 expected format of a request by RS 232 controller:
Start Count Device ID Type Key Checksum
0xFE 0x03 0xa0 0x10 0xXX 0xXX
Table 1: Type 10 Primary Command List
NOTE: The values in the table below show the exact byte sequence of all requests. The device
will expect the bytes only - no spaces, no delimiter, etc. The controlling device may implement its
own method to download each command sequence. The numerical values in the first column are
Hexadecimal.
RSP 1098 HEX Command Command Description
FE 03 A0 10 00 B3 RMC Vol+ Remote Volume Up
FE 03 A0 10 01 B4 RMC Vol- Remote Volume Down
FE 03 A0 10 02 B5 CD Source CD
FE 03 A0 10 03 B6 Tuner Source Tuner
FE 03 A0 10 04 B7 Tape Source Tape
FE 03 A0 10 05 B8 Video 1 Source Video 1
FE 03 A0 10 06 B9 Video 2 Source Video 2
FE 03 A0 10 07 BA Video 3 Source Video 3
FE 03 A0 10 08 BB Video 4 Source Video 4
FE 03 A0 10 09 BC Video 5 Source Video 5
FE 03 A0 10 0A BD Power Power Toggle
FE 03 A0 10 0B BE Vol+ Volume Up
FE 03 A0 10 0C BF Vol- Volume Down
FE 03 A0 10 0D C0 Treble+ Treble Up
FE 03 A0 10 0E C1 Treble- Treble Down
FE 03 A0 10 0F C2 Bass+ Bass Up
FE 03 A0 10 10 C3 Bass- Bass Down
FE 03 A0 10 11 C4 Stereo Stereo
FE 03 A0 10 12 C5 3 Stereo Dolby 3 Stereo
FE 03 A0 10 13 C6 Pro Logic Dolby Pro Logic
FE 03 A0 10 14 C7 DSP DSP Music
FE 03 A0 10 15 C8 Multi Multi Input
FE 03 A0 10 16 C9 Dynamic Dynamic Range
FE 03 A0 10 17 CA Rec Record
FE 03 A0 10 18 CB OSD Menu OSD Menu
FE 03 A0 10 19 CC OSD Enter OSD Enter
FE 03 A0 10 1A CD OSD Right (+) OSD Right
FE 03 A0 10 1B CE OSD Left (-) OSD Left
FE 03 A0 10 1C CF OSD Up OSD Up

RSP 1098 HEX Command Command Description
FE 03 A0 10 1D D0 OSD Down / Dynamic OSD Down / Dynamic
FE 03 A0 10 1E D1 Mute Mute
FE 03 A0 10 1F D2 Digital In Select Digital Input Select
FE 03 A0 10 22 D5 Surround+ Next Surround Mode
FE 03 A0 10 23 D6 Zone 2 / Main Zone
FE 03 A0 10 4A FD Power Off Power Off
FE 03 A0 10 4B FE Power On Power On
FE 03 A0 10 4C FF C Center
FE 03 A0 10 4D 00 S Subwoofer
FE 03 A0 10 4E 01 R Surround
FE 03 A0 10 4F 02 Filter (EQ) Cinema EQ
FE 03 A0 10 52 05 FL On / Off FL Display Toggle
FE 03 A0 10 53 06 Pro Logic / 3 Stereo Dolby 3 Stereo
FE 03 A0 10 54 07 dts Neo:6 dts Neo:6
FE 03 A0 10 57 0A Music 1 Music 1
FE 03 A0 10 58 0B Music 2 Music 2
FE 03 A0 10 59 0C Music 3 Music 3
FE 03 A0 10 5A 0D Music 4 Music 4
FE 03 A0 10 5B 0E 5Ch Stereo 5Ch Stereo
FE 03 A0 10 5C 0F 7Ch Stereo 7Ch Stereo
FE 03 A0 10 5D 10 PLII Cinema Dolby PLII Cinema
FE 03 A0 10 5E 11 PLII Music Dolby PLII Music
FE 03 A0 10 5F 12 Pro Logic Dolby Pro Logic
FE 03 A0 10 60 13 dts Neo:6 Music dts Neo:6 Music
FE 03 A0 10 61 14 dts Neo:6 Cinema dts Neo:6 Cinema
FE 03 A0 10 62 15 PLII Panorama PLII Panorama
FE 03 A0 10 63 16 PLII Dimension Up PLII Dimension Up
FE 03 A0 10 64 17 PLII Dimension Down PLII Dimension Down
FE 03 A0 10 65 18 PLII Center Width Up PLII Center Width Up
FE 03 A0 10 66 19 PLII Center Width Down PLII Center Width Down
FE 03 A0 10 67 1A Shift (Treble Bass) Tone Controls
FE 03 A0 10 68 1B DD EX On/Off DD EX On/Off
FE 03 A0 10 74 27 PLII Game Dolby PLII Game
FE 03 A0 10 FF B2 Display Refresh Display Refresh
Table 2: Commands Sent with exceptions or modifications required
RSP 1098 HEX Command Expected Command
FE 03 A0 10 4A FD FE 03 A0 10 4A FD 00 Power Off
FE 03 A0 10 4B FE FE 03 A0 10 4B FD 01 Power On
The table above list commands with exceptions. To keep the RSP 1098 from encountering the
start byte FE in any position other than as the start byte, any occurrence of the bytes FE or FD in
the command string must be converted to either FD 00 (for FD) or FD 01 (for FE). This will allow
the string to pass while masking any occurrence of the byte FE except as the start byte.

Table 3: Type 14 Main Zone Command List
NOTE: These commands are duplicate functions of the primary commands in the table above
bearing the same name, but are discrete for the main zone only. For multi-zone installation
applications, it is recommended that the below commands be used rather than the type 10
commands to avoid zone conflicts.
RSP 1098 HEX Command Command Description
FE 03 A0 14 00 B7 RMC Vol+ Remote Volume Up
FE 03 A0 14 01 B8 RMC Vol- Remote Volume Down
FE 03 A0 14 02 B9 Main CD Main Zone Source CD
FE 03 A0 14 03 BA Main Tuner Main Zone Source Tuner
FE 03 A0 14 04 BB Main Tape Main Zone Source Tape
FE 03 A0 14 05 BC Main Video 1 Main Zone Source Video 1
FE 03 A0 14 06 BD Main Video 2 Main Zone Source Video 2
FE 03 A0 14 07 BE Main Video 3 Main Zone Source Video 3
FE 03 A0 14 08 BF Main Video 4 Main Zone Source Video 4
FE 03 A0 14 09 C0 Main Video 5 Main Zone Source Video 5
FE 03 A0 14 0A C1 Main Power Main Zone Power Toggle
FE 03 A0 14 1E D5 Main Mute Main Zone Mute
FE 03 A0 14 6C 23 Main Mute On Main Zone Mute On
FE 03 A0 14 6D 24 Main Mute Off Main Zone Mute Off
Table 4: Type 15 Record Source Command List
RSP 1098 HEX Command Command Description
FE 03 A0 15 02 BA Record CD Record Source CD
FE 03 A0 15 03 BB Record Tuner Record Source Tuner
FE 03 A0 15 04 BC Record Tape Record Source Tape
FE 03 A0 15 05 BD Record Video 1 Record Source Video 1
FE 03 A0 15 06 BE Record Video 2 Record Source Video 2
FE 03 A0 15 07 BF Record Video 3 Record Source Video 3
FE 03 A0 15 08 C0 Record Video 4 Record Source Video 4
FE 03 A0 15 09 C1 Record Video 5 Record Source Video 5
FE 03 A0 15 6B 23 Record Source Record Source
Table 5: Type 16 Zone 2 Command List
RSP 1098 HEX Command Command Description
FE 03 A0 16 00 B9 Vol+ Zone 2 Volume Up
FE 03 A0 16 01 BA Vol- Zone 2 Volume Down
FE 03 A0 16 02 BB Zone 2 CD Zone 2 Source CD
FE 03 A0 16 03 BC Zone 2 Tuner Zone 2 Source Tuner
FE 03 A0 16 04 BD Zone 2 Tape Zone 2 Source Tape
FE 03 A0 16 05 BE Zone 2 Video 1 Zone 2 Source Video 1
FE 03 A0 16 06 BF Zone 2 Video 2 Zone 2 Source Video 2
FE 03 A0 16 07 C0 Zone 2 Video 3 Zone 2 Source Video 3
FE 03 A0 16 08 C1 Zone 2 Video 4 Zone 2 Source Video 4
FE 03 A0 16 09 C2 Zone 2 Video 5 Zone 2 Source Video 5

RSP 1098 HEX Command Command Description
FE 03 A0 16 0A C3 Zone 2 Power Zone 2 Power Toggle
FE 03 A0 16 1E D7 Zone 2 Mute Zone 2 Mute
FE 03 A0 16 4A 03 Zone 2 Power Off Zone 2 Power Off
FE 03 A0 16 4B 04 Zone 2 Power On Zone 2 Power On
FE 03 A0 16 6B 24 Zone 2 Source Zone 2 Follow Main Source
FE 03 A0 16 6C 25 Zone 2 Mute On Zone 2 Mute On
FE 03 A0 16 6D 26 Zone 2 Mute Off Zone 2 Mute Off
Table 6: Type 30 Volume Direct Command List
RSP 1098 HEX Command Command Description
FE 03 A0 30 00 D3 Volume Min Volume Min
FE 03 A0 30 01 D4 Volume 1 Volume 1
FE 03 A0 30 02 D5 Volume 2 Volume 2
FE 03 A0 30 03 D6 Volume 3 Volume 3
FE 03 A0 30 04 D7 Volume 4 Volume 4
FE 03 A0 30 05 D8 Volume 5 Volume 5
FE 03 A0 30 06 D9 Volume 6 Volume 6
FE 03 A0 30 07 DA Volume 7 Volume 7
FE 03 A0 30 08 DB Volume 8 Volume 8
FE 03 A0 30 09 DC Volume 9 Volume 9
FE 03 A0 30 0A DD Volume 10 Volume 10
FE 03 A0 30 0B DE Volume 11 Volume 11
FE 03 A0 30 0C DF Volume 12 Volume 12
FE 03 A0 30 0D E0 Volume 13 Volume 13
FE 03 A0 30 0E E1 Volume 14 Volume 14
FE 03 A0 30 0F E2 Volume 15 Volume 15
FE 03 A0 30 10 E3 Volume 16 Volume 16
FE 03 A0 30 20 F3 Volume 32 Volume 32
FE 03 A0 30 30 03 Volume 48 Volume 48
FE 03 A0 30 40 13 Volume 64 Volume 64
FE 03 A0 30 50 23 Volume 80 Volume 80
FE 03 A0 30 5F 32 Volume 95 Volume 95
FE 03 A0 30 60 33 Volume Max Volume Max
Table 7: Commands Sent with exceptions or modifications required
RSP 1098 HEX Command Expected Command
FE 03 A0 30 2A FD FE 03 A0 30 2A FD 00 Volume 43
FE 03 A0 30 2B FE FE 03 A0 30 2B FD 01 Volume 44
Table 8: Type 32 Zone 2 Volume Direct Command List
RSP 1098 HEX Command Command Description
FE 03 A0 32 00 D5 Zone 2 Volume Min Zone 2 Volume Min
FE 03 A0 32 01 D6 Zone 2 Volume 1 Zone 2 Volume 1
FE 03 A0 32 02 D7 Zone 2 Volume 2 Zone 2 Volume 2
FE 03 A0 32 03 D8 Zone 2 Volume 3 Zone 2 Volume 3

RSP 1098 HEX Command Expected Command
FE 03 A0 32 04 D9 Zone 2 Volume 4 Zone 2 Volume 4
FE 03 A0 32 05 DA Zone 2 Volume 5 Zone 2 Volume 5
FE 03 A0 32 06 DB Zone 2 Volume 6 Zone 2 Volume 6
FE 03 A0 32 07 DC Zone 2 Volume 7 Zone 2 Volume 7
FE 03 A0 32 08 DD Zone 2 Volume 8 Zone 2 Volume 8
FE 03 A0 32 09 DE Zone 2 Volume 9 Zone 2 Volume 9
FE 03 A0 32 0A DF Zone 2 Volume 10 Zone 2 Volume 10
FE 03 A0 32 0B E0 Zone 2 Volume 11 Zone 2 Volume 11
FE 03 A0 32 0C E1 Zone 2 Volume 12 Zone 2 Volume 12
FE 03 A0 32 0D E2 Zone 2 Volume 13 Zone 2 Volume 13
FE 03 A0 32 0E E3 Zone 2 Volume 14 Zone 2 Volume 14
FE 03 A0 32 0F E4 Zone 2 Volume 15 Zone 2 Volume 15
FE 03 A0 32 10 E5 Zone 2 Volume 16 Zone 2 Volume 16
FE 03 A0 32 20 F5 Zone 2 Volume 32 Zone 2 Volume 32
FE 03 A0 32 30 05 Zone 2 Volume 48 Zone 2 Volume 48
FE 03 A0 32 40 15 Zone 2 Volume 64 Zone 2 Volume 64
FE 03 A0 32 50 25 Zone 2 Volume 80 Zone 2 Volume 80
FE 03 A0 32 5F 34 Zone 2 Volume 89 Zone 2 Volume 89
FE 03 A0 32 60 35 Zone 2 Volume Max Zone 2 Volume Max
Table 9: Commands Sent with exceptions or modifications required
RSP 1098 HEX Command Expected Command
FE 03 A0 32 28 FD FE 03 A0 32 28 FD 00 Zone 2 Volume 40
FE 03 A0 32 29 FE FE 03 A0 32 29 FD 01 Zone 2 Volume 41