Rovo kids Ride-on patrol motorcycle User manual

Colours will vary as pictured in this manual.

Kids Ride-On Patrol Motorcycle

User Manual

[Revision 3.0 November 2017]

READ THIS MANUAL CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE – FAILURE TO DO SO MAY

RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description and packaging.

THE BATTERY MAY HAVE SOME CHARGE ON ARRIVAL, IT IS IMPORTANT

HOWEVER THAT THE BATTERY IS CHARGED PRIOR TO USE.

Kids Ride-On Patrol Motorcycle

Table of Contents

Safety.......................................................................................................................................1

General Safety Reminders ............................................................................................................................1

Charging Safety ............................................................................................................................................1

Operation Safety ...........................................................................................................................................2

Included Items............................................................................................................................3

Set-Up .....................................................................................................................................4

Operation ..................................................................................................................................6

Functions of the motorcycle head..................................................................................................................6

Drive Control.................................................................................................................................................6

Fast and Slow Speed Control........................................................................................................................7

Charging the Accumulator.............................................................................................................................7

Replacing the Fuse .......................................................................................................................................8

Fuse Applications..........................................................................................................................................8

Maintenance ..............................................................................................................................9

Troubleshooting........................................................................................................................10

Technical Specifications..............................................................................................................11

Kids Ride-On Patrol Motorcycle

Safety

General Safety Reminders

Please pay attention to following reminders for your child’s safe driving experience:

•The motorcycle must be installed and adjusted by adults and make sure that children are kept away from the

moving components of the motorcycle.

•This motorcycle is not suitable for children ages 36 months old and younger.

•Children’s use of this motorcycle should be under the supervision of adults. Never leave children unattended

while the motorcycle is being used.

•Do not make or allow the child to stand or play on the foot rest of the motorcycle.

•The accumulator must be charged by adults! Please fully-charge the battery first before using the

motorcycle.

•In order to avoid accidents, injuries or risk of suffocation, please keep packaging materials such as plastic

bags away from children.

•Do not use spare parts or components that are not supplied by the manufacturer.

•Install all of the batteries in the correct polarities.

•The accumulator is not a toy.

•The maximum load capacity of the motorcycle is 25kg. Please do not overload the motorcycle.

•This motorcycle is suitable for children aged 37 to 96 months only.

•The power supply terminals should be shorted out.

•The motorcycle should not be connected to power supplies that go beyond recommended power ratings.

Charging Safety

•Ensure that the accumulator has been charged for 18 hours for the first time of charging, or the accumulator

will be damaged permanently, which can never be recovered.

•Plug the DC pin into the charging jack first when charging the accumulator. Then, plug the accumulator into

the power socket. The motorcycle should not be used while it is still charging.

•Charge the battery in a timely manner after each hour of use. The normal charging duration is 8 – 12 hours.

Do not go over 20 hours.

•The charger and accumulator may emit heat (under 60°C) while charging is taking place. This is a normal

phenomenon.

•To avoid short-circuiting, the battery should not be charged if water is detected inside the connectors.

•Only use the charger and accumulator that is designed for the motorcycle in order to avoid damaging the

charger and the accumulator or short-circuiting the electrical equipment.

•Charge the motorcycle at least once a month when storing it for an extended period of time.

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Kids Ride-On Patrol Motorcycle

Operation Safety

•Make sure that the accumulator has been charged for 18 hours for first time use, otherwise the accumulator

will be damaged permanently, which can never be recovered.

•Make sure that all of the components have been well-mounted and tightly-connected before using the

motorcycle.

•Do not operate the motorcycle in dangerous areas such as on busy streets, roads, slopes or ditches.

•Do not operate the motorcycle on roads with smooth surfaces, such as marble or tilts.

•Do not turn the Forward/Backward switch while the motorcycle is moving. Do not let your child stand on the

seat.

•Never change the wire circuitry of the motorcycle or add any electrical equipment to it.

•The motorcycle will stop moving when it encounters any barriers. Please steer clear of the barrier before

driving again.

•Do not use the motorcycle indoors in order to avoid damaging furniture or injuring your child.

•Cut-off the power supply if the motorcycle is not being used; remove the battery connectors if the motorcycle

will not be used for a long time.

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Kids Ride-On Patrol Motorcycle

Included Items

No. Component

Name Qty. No. Component

Name Qty.

1 Motorcycle

body 1 11 Foot rest 1 21 Wind board 1

2 Rear axle

shaft 1 12 Gear case 1 22 Decorative

lamp socket 2

3 Shims 8 13 Driving

wheel 1 23 Screw 10

4 Boom screw 1 14 Cotter 2 24 Head alarm

lamp 2

5 Exhaust

pipe 2 15 Front wheel

cover 2 25 Charger 1

6 Taillight

shade 1 16 Rear wheel

cover 2 26 Head lamp 1

7 Accumulator 1 17 Front wheel 1 27 Foot switch 1

8 Accumulator

layering 1 18 Upper and

lower caps

of the tool kit 1 28 Nut wrench 1

9 Seat knob 1 19 Fuel tank

cap 1 29 Front fender 1

10 Seat

cushion 1 20 Air intake 2

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Kids Ride-On Patrol Motorcycle

Set-Up

1. Mount the front wheel components and the front wheel (see Pictures 1 and 2).

a. Align the hole of the boom with the head at the same level with the hole at the front boom of the

motorcycle body. Insert a boom screw into the two holes and secure the screw with a nut. Mount other

boom screws according to the directions instructed by the arrows.

b. Install the front fender at the direction instructed by the arrows until the two screw holes are aligned

with each other and then secure it with the screw.

c. Place the front wheel at the middle of the handlebar. Mount a shim at each sides of the front wheel.

When the two holes are parallel to each other, make the front axle go through and then install a shim

and a spring washer at each of the two sides of the front axle and secure with a nut.

2. Mount the rear wheel (see Picture 3-1).

a. Insert a shim into the rear axle from the right side and then insert the rear axle into the motorcycle

body from the left side of the latter; mount the gear case onto the right side of the motorcycle.

b. Mount the driving wheel (match the side where the double wedge lies with the gear case) on the right

side of the motorcycle body and install a shim and a left wheel on to the left side of the motorcycle.

c. Install a shim at both sides of the wheel and insert the cotter into the pore on the real wheel axle and

fix the cotter with tools.

d. Align the screw hole of the wheel cap a

t the screw hole of the real wheel and secure it with a screw.

Video Tutorial:

Ride-On Motorcycle Assembly

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Kids Ride-On Patrol Motorcycle

3. Mount the rear wheel (see Picture 3-2, Optional).

a. Insert the real wheel into the motorcycle body from the left side and mount a gear case at the two

sides of the motorcycle respectively. Make sure that the “L” and “R” on the gear case correspond to

the “L” and “R” on the motorcycle body.

b. Mount the driving wheel. Mount a shim and a cotter at both sides of the rear axle respectively and

align the screw hole on the wheel cap with the screw hole on the real wheel and then secure them with

screws.

4. Mount the tool kit (see Picture 4).

Align the screw hole at the back cover

of the tool kit with the screw hole on

the motorcycle body and secure it with

a screw, as instructed by the arrow.

Finally, connect the power supply wire

of the flash light.

5. Install the seat (see Picture 5).

First, align the two snaps at the back

end of the seat at the two troughs at

the back end of the motorcycle body

and chuck tightly. Then screw the seat

lock catch to the position of “ON”; align

the fixed pillar at the bottom of the seat

at the fixed hold for the seat on the

motorcycle body and then press down

the seat and screw the lock catch to

the position of “OFF” (Please install as

instructed by the arrows).

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Kids Ride-On Patrol Motorcycle

Operation

Functions of the motorcycle head

The motorcycle head is easy and flexible to operate. Press different buttons and you will hear different musical

sound at the same time.

Optional: The front and back flash lights of the motorcycle will flash when the sounds ring out.

Drive Control

The child should sit properly on the seat and then turn the power switch to “ON” and the start sound rings out at

the same time. Turn the switch for the flash light to “ON” and it will turn on simultaneously. Turn the

Forward/Stop/Backward switch to “Forward” and press down on the foot switch. The motorcycle will then move

forward. Let go of your foot from the foot switch and the motorcycle will stop. Turn the Forward/Stop/Backward

switch to “Backward” and press down on the foot switch. The motorcycle will then move backwards. Let go of

your foot from the foot switch and the motorcycle will stop. Place the switch on the “STOP” position. The

motorcycle will then cease moving.

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Kids Ride-On Patrol Motorcycle

Fast and Slow Speed Control

The child should sit properly on the seat and then turn the power switch to “ON” and the start sound rings out at

the same time. Turn the flash light switch to “ON” and it will turn on simultaneously.

Setting the switch on “FAST”: Turn the Forward/Stop/Backward switch to “Forward” and then press down on the

foot switch. The motorcycle will then move forward with a fast speed. Let go of your foot from the foot switch; the

motorcycle will then stop. Turn the switch to “Backward” and then press down on the foot switch. The motorcycle

will the move backwards with a fast speed. Let go of your foot from then foot switch; the motorcycle will then

stop. Turn the switch to “Stop”; the motorcycle will then cease moving.

Setting the switch on “SLOW”: Turn the Forward/Stop/Backward switch to “Forward” and press down on the foot

switch. The motorcycle will then move forward with a slow speed. Let go of your foot from the foot switch; the

motorcycle will then stop. Turn the switch on “Backward” and press down on the foot switch. The motorcycle will

then move backward with a slow speed and until it stops. Turning the switch to “STOP” will stop the motorcycle

from moving.

Charging the Accumulator

Charge the accumulator in a timely manner when the power supply is low. The jack for power charging lies at

the very front of the motorcycle body

Note: Do not operate the motorcycle while it is still charging.

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Kids Ride-On Patrol Motorcycle

Replacing the Fuse

In case the fuse needs to be replaced, remove the fuse (it is inside the transparent fuse base under the seat)

first, then open the fuse case and replace the damaged one with a new fuse. Afterwards, close the fuse case.

Note: The fuse should be rated at 20A. Please be careful of the socket when pulling out/pushing in the charger.

Plug-in the charger towards the vertical direction of the socket.

Fuse Applications

The fuse is resettable. When the current is detected to be over 15A, the power supply will be cut automatically

for 5 to 10 seconds and then it will recover automatically (optional).

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Kids Ride-On Patrol Motorcycle

Maintenance

•Examine and maintain the motorcycle frequently in order to keep your child away from accidents and

injuries.

•Make sure that all of the components are available before using the motorcycle. Contact the manufacturer or

an authorised service centre if any components are missing.

•Check whether any screws are loose or any of the component is damaged at regular intervals.

•Check and confirm that all of the components are in good, working condition when you are using them.

•Clean the motorcycle at regular intervals being careful not to damage the electrical equipment.

•Refer closely to this user manual when dismantling the motorcycle in order to prevent any unnecessary

damages.

•Check the product and its charger at regular intervals and make sure that the wires, socket, outer shell and

other components are all in good working condition. Stop using the motorcycle if there are any damaged

components. Repair any damaged parts first before re-using the motorcycle.

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Kids Ride-On Patrol Motorcycle

Troubleshooting

Symptom Possible Cause Possible Solution

Not moving at all when

accelerating

Battery not connected Please connect battery

RC/TC Switch is on Turn Switch to "Manual"

Switched off Turn power switch to ON

Battery is flat Battery has an average running usage of 1-2 hours.

Please recharge battery.

Exhausted battery life If still does not work after 8 hours of charging the

battery will need replacing

Damaged battery Damage to battery can occur if left on charge for

over 12 hours. Please avoid this. Battery will need

replacing

Not charging

Switched ON This will not charge if unit is switch on! Please

ensure unit is switched off while charging.

Battery If the charging indicator does not light, the battery

may need replacing.

Charger If charging indicator does not light, the charger may

need replacing.

Button is engaged/active

If a button (accelerator, sound or other) is

accidently pressed and held it, the unit will not

charge. Please ensure all buttons are operating

normally and nothing is jamming it.

Remote control is not working

Manual Switch is on Please ensure "RC/TC" switch is on.

Controller batteries Please ensure fresh AA or AAA batteries have been

replaced in the controller.

Aerial is not attached Please ensure that the aerial is screwed on and

secured onto the controller.

Out of range

The controller has roughly 3m range. If the ride on

vehicle is out of this range it may not be receiving

the signal. Please bring the controller within closer

range of the ride on vehicle.

Hi Speed is not working (if

equipped)

Driving wheels are swapped

around (Left on Right and

Right on Left)

Please switch over rear wheels so that Left is on

the Left side and Right is on the Right side.

Switch is on low Please turn switch to Hi

Low battery Please recharge battery

No sound Volume turned down Please turn volume up

Aux cable in MP3 port Please remove aux cable from MP3 port

Forward and Reverse are

switched around / Forward

moves backwards and

backwards moves forwards

Motorised driving wheels are

swapped around (Left on

Right and Right on Left)

Please switch over rear wheels so that Left is on

the Left side and Right is on the Right side.

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Kids Ride-On Patrol Motorcycle

Technical Specifications

Battery DC12V7AH

Suitable Age 3-8 Years

Max Rider Weight 25kg

Range 1-2 hours

ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS ROVOKIDS

Some experts believe that the incorrect or prolonged use of almost any product may

cause seriousinjury or death. To help reduce your risk of seriousinjury or death, refer

to the information below. For more information, see www.datastreamserver.com/safety

Consult all documentation, packaging and product

labelling before use. Note that some products feature

documentation available online. It is recommended to

print and retain the documentation.

Before each use, check the product for loose/broken/

damaged/missing parts, wear or leaks (if applicable).

Never use a product with

loose/broken/damaged/missing parts, wear or leaks.

Products must be inspected and serviced (if

applicable) by a qualified technician every 6 months.

This is based on average residential use by persons of

average size and strength, and on a property of

average metropolitan size. Use beyond these

recommendations may require more frequent

inspections/servicing.

Ensure that all users of the product have completed a

suitable industry recognised training course before

being allowed access to the product.

If this product has been purchased in error when

considering the information presented here, contact

the retailer directly for details of their returns policy, if

required.

The product has been supplied by a general

merchandise retailer that may not be familiar with your

specific application or description of application. Be

sure to attain third-party approval from a qualified

specialist for your application before use, regardless of

any assurances from the retailer or its representatives.

This product is not intended for use where fail-safe

operation is required. As with any product (for

example, automobile, computer, toaster), there is the

possibility of technical issues that may require the

repair or replacement of parts, or the product itself. If

the possibility of such failure and the associated time it

may take to rectify could in any way inconvenience the

user, business or employee, or financially affect the

user, business or employee, then the product is not

suitable for your requirements. This product is not

intended for use where incorrect operation or a failure

of any kind, including but not limited to, a condition

requiring product return, replacement, parts

replacement or service by a technician may cause

financial loss, loss of employee time or an

inconvenience requiring compensation.

ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Rovo Kids Ride-On Patrol Motorcycle User manual

Popular Motorized Toy Car manuals by other brands