Rowkin micro User manual

TRUE WIRELESS
micro
User Manual

WELCOME
Welcome to your True Wireless experience
with your Rowkin Micro. This User Manual
will guide will introduce you to the Micro
and how it can change the way you
experience your music.
User Manual

CONTENTS
1
2
3
4
5
6
User Manual
What You Get
What Does What
True Wireless
Needs Bluetooth
Single Earbud Pairing
and Multi-device Pairing
When in Doubt
Advanced Stuff
7Sorry... We Have To.

1. WHAT YOU GET
User Manual
In the box you get
pair of our epic true
wireless earbuds.
Plus your sleek new
portable charging
case.
We also give you 3 different
size ear tips to make sure
your headphones fit
perfectly in your ears.
Oh, and we also gave you
something charge them with...

2. WHAT DOES WHAT?
User Manual
Control Button
Battery Indicator
Charging Port
Built-in-Mic/
LED Indicator
CONTROLS
Press the control button once to answer the
incoming call.
Press the control button once to end a call.
Press the control button for 2 seconds to reject
the incoming call.
Press the control button once to play music.
Press the control button once to pause music.
Answer call:
End call:
Reject call:
Play music:
Pause music:
Double press the control button.
Activate voice command:
Note: Please ensure your mobile device supports voice command function for this feature.

3. SYNC & PAIR YOUR EARBUDS
User Manual
1. Power on both
headphones and hold
the control buttons
until the headphones
enter sync mode.
2. Hold both
earbuds next to
each other to allow
them to sync to
each other.
3. Once the
earbuds sync to
each other, the
primary earbud will
enter to pairing
mode.
For Subsequent Use:
• Power on both headphones by pressing the
control button for 2-3 sec.
• Power on both headphones by pressing the
control button for 2-3 sec.
• When you see the white light ( ), release the
control button
4. Go to your
bluetooth settings
on your device and
select:
“Rowkin Bit S-B”.
Sometimes this will
take up to 10 sec.
Hold for
6-8 sec.
Wait
10-30 sec.
Primary
(Left Channel)
Primary
(Left Channel)
Secondary
(Right Channel)
Blinks White Only
Primary
(Left Channel)

Rowkin Bit S
Bluetooth
4. SINGLE EARBUD PAIRING AND
MULTI-DEVICE PAIRING
1. Power on one
earbud and hold the
control button until it
enters pairing mode.
2. Find the Bit
earbud in your first
device's Bluetooth
settings and select
it to connect.
3. Once the
earbud has been
paired, turn
Bluetooth off on
your first device.
For Subsequent Use:
• Power on both headphones by pressing the
control button for 2-3 sec.
• When you see the white light ( ), release the
control button
4. Repeat steps 1-3
for the second
earbud with your
second device.
Then go back to
your first device
and turn back on
the Bluetooth.
OFF
6 sec
ON
User Manual

Step 1
Step 2
5. HOW TO RESET
User Manual
Place earbuds in the
Micro charging case.
Step 3
Hold the control buttons until you see
the lights flash white and then red.
Press down on both control
buttons and hold.
If you ever need to reset your device follow these instructions:

6. ADVANCED STUFF
User Manual
SPECIFICATIONS
Dimension:
Earbud: 0.55”(D) x 0.82”(L) (14x21mm)
Portable charging case:
Size: 1.46" x 2.54" x 0.88"
(37mm x 64.6mm x 22.4mm)
Weight:
Earbud: 0.18oz (5.2g) each
Portable charging case: 1.2oz (36g)
Battery type:
Rechargeable lithiumion polymer battery
Battery input:
Earbud: 5V / 35mA
Portable charging case: 5V / 1A
To earbuds: 5V / 200mA
USB Output: 5V/0.5A
Battery output (Portable charging case):
Battery capacity:
Earbud: 55mAh
Portable charging case: 800mAh
Charging time:
Earbud: ≤90 minutes
Portable charging case: ≤150 minutes
Standby time (power on):
Standby time (power off):
Bluetooth profiles:
about 27 hours
about 120 days
Music time: up to 2 hours
Talk time: up to 3 hours
Frequency response: 100Hz-20kHz
Bluetooth version: 4.1
HFP, HSP, AVRCP, A2DP, and SPP
Audio enhancements:
Noise reduction and echo cancellation
PROBLEM PROBABLE CAUSE SOLUTION
Sound breaks up or fades
in and out
TROUBLESHOOTING
Headset is too far away
from the source device;
Interference between the
headset and the source
device; The human body
may interfere and weaken
signal in some conditions.
Keep source device close
and in direct view of the
headset. Do not cover with
your hands or arms.
The other party on the call
can’t hear my voice
Environment is too noisy;
Headset is covered during
the call, for example, by
hair or hands.
Remove anything covering
the headset; Speak louder
and call in a quiet environ-
ment.
Only one earbud has sound
when calling
By design only the primary
headset is functional when
calling.
Refer to Stereo Mode Con-
trols for more detail.
For the best Bluetooth connection, keep source device in direct view of the
headset. The human body may interfere and weaken signal in some conditions.

7. SORRY... WE HAVE TO.
User Manual