ROYAL GOURMET PD1300 User manual

Series No.: 0609-D

This griddle is for outdoor use only,
assemble or safely operate the griddle.
3. Always place your griddle on a hard, and leveled surface far away from combustibles.
4. DO NOT leave a lit griddle unattended. Keep children and pets away from the griddle AT ALL TIMES.
5. DO NOT place griddle on any type of tabletop surface.
6. DO NOT use griddle in high winds.
4. This griddle is shipped from the factory for propane gas use only.
1. The minimum distances around the griddle that must be kept free of combustible materials is
36 inches (90cm),
2. Do not place the griddle where there are combustible surfaces overhead.

Note:The right and left sides of the griddle are designed as if you are facing the front of the griddle.

A 2 pcs B 2 pcs
A
B

4. Ensure your griddle is on level ground and the locking casters are locked before use.
9. Do not lean over the griddle or touch the edges of the firebox,air vent,or griddle top when in use.
11. Do not use charcoal briquettes,lava rock,or any type of ceramic product in the gas section of this griddle.
Your new gas griddle operates on LP (Liquid Petroleum）Gas.It is odorless,colorless,and non-toxic when
produced. You can smell LP gas as it has been given an odor similar to rotten cabbage for your safety.
Your griddle uses the newest and safest LP gas cylinder(tank) which includes two features:

When purchasing or exchanging a tank for your gas griddle, it must be constructed and marked in accordance
LP GAS CYLINDER (NOT SUPPLIED WITH THIS GRIDDLE)
The LP (Liquid Propane) gas tank specifically designed to be used with this griddle must have a 20-lb (9.1kg)
This griddle is designed to fit Worthington, Manchester, or SMPC brand 20-lb (9.1kg) cylinders. Other brands
may fit this griddle if the top collar and bottom support ring have similar dimensions.
DO NOT connect this griddle to an existing #510POL cylinder valve with Left Hand threads. The Type 1

Replace a damaged hose assembly with the one specified in the parts list before using the griddle.
2. Place the tank on the hook under the griddle body with the valve facing outward.
See Assembly instructions to secure the tank to the griddle body.

hose assembly with the one specified in the parts list before using the griddle.
3. Always perform the Leak Test listed below before using your griddle for the first time,if the cylinder
4. Do not attempt to connect this griddle to the LP system of a motor home or trailer.
1. Do not connect this griddle to any unregulated sources of propane.
DO NOT USE THE GRIDDLE

Always visually inspect your griddle before lighting. Replace any hose that are frayed or cracked. Look for
anything that could block spaces for ventilation and remove it or move the griddle.
TURNING OFF YOUR GRIDDLE

Do not clean any part of your griddle in a self -cleaning oven.
Clean your griddle regularly to prevent grease buildup, grease fires or excessive flare-ups.
Always allow the griddle to cool down prior to cleaning.
We recommend you clean your burners at least twice a year, or before use, if the griddle has not
include the griddle uneven or low heat,or difficulty igniting the burners.In cases of severe blockage,this can
griddle and/or personal injury.
Wait for the griddle to cool, and

GRIDDLE STORAGE
1. Clean your griddle before storage.
2. Storage of a gas griddle indoors is permissible only if the propane tank is disconnected and removed from
the gas griddle.
3. Cover the griddle.
4. Perform a Leak Test before using the griddle after it has been in storage a period of time

Turn off control knobs and LP tank valve.
After fire is out and griddle is cold, remove
burner and inspect for spider nests or rust.
see natural hazard and cleaning the
burner assembly pages.

1. Clean burners and inside of griddle/
firebox
2. Trim fat from meat before grilling.
Turn front of griddle to face wind or increase
flame height.
Refill LP tank.
Refer to “sudden drop in gas flow” above.
Turn knobs to OFF. Turn gas off at LP tank.
Leave lid in position and let fire burn out.
After griddle cools, remove and clean all
parts
1. Clean burners and inside of
griddle/firebox
2. Trim fat from meat before grilling.
3. Adjust (lower) temperature
a) Turn the burner on for 15 to 20 minutes. Ensure appliance is cold before continuing.
b) Grids should be cleaned periodically by soaking and washing in soapy water.
c) The interior surfaces of the griddle housing cover should also be washed with hot, soapy water. Use a wire brush, steel
wool or a scouring pad to remove stubborn spots.
d) Periodically check the burner to see that it is free from insects and spiders which may clog the gas system, deflecting gas
flow. Ensure to clean venturi pipes on burner very carefully, making sure that there are no obstructions. We recommend
that you use a pipe cleaner to clean the venturi pipe area.
e) Any modifications of this appliance may be dangerous and are not permitted.
Stand your gas griddle on a safe level surface, away from inflammable items such as wooden fences or overhanging
tree branches.Never use your gas griddle indoors!
Once lit do not move your gas griddle or leave it unattended.
Keep children and pets at a safe distance from the gas griddle.
Keep a fire extinguisher handy.
The gas griddle will become hot when in use, so handle lids etc. with the help of gloves.
Ensure that the appliance has completely cooled down before storing.

appreciation of your new griddle. We provide a warranty for your product within the framework warranty condition under
griddles