ROYOLE FLX User manual

FLX Display Module
User Manual

Thanks for using FLX display module! This User Manual will guide you to start using
your FLX display module and introduce core functions.
About the module
Introduction
Bluetooth/Hotspot Button
Power Button
Power Port
Data Port
Rear
Front
Display
Protective Casing
Caring For Your FLX Display Module
To clean use a slightly micro fiber nonabrasive wiper.
Ingress Protection Marking: IP53, please avoid submersing in water, keep away
from open flames and excessive heat.
1

Installing the App
To install, scan the QR Codes below or search and download from the App store or
Google Play store.
Power On/Off
Once your FLX display module was properly connected to a portable power bank or
power adapter, the device will be turned on automatically. To turn off, simply disconnect
the device with the power supplier.
Hotspot Connection
1. Open the “XXX” App and scan QR code on the screen of your FLX display module.
2. Or turn on Hotspot and Bluetooth in your smartphone settings, then search and
connect it to your FLX display module by Bluetooth, once the Bluetooth connection
has completed, the Hotspot will be paired automatically.
Wi-Fi Connection
Search and find the Wi-Fi network you are going to connect on the FLX display module,
enter the password of the network to complete the connection.
2

Transfer contents to FLX display module
There are following ways allow you to transfer content (images, videos, texts) to
your display module：
1. Select images/videos from the Local Album of your smartphone, you can use our
App to edit and share them wirelessly to the display module.
2. Connect your display module and your PC or laptop with micro-USB cable,
select images/videos from your PC or laptop, then transfer the selected contents to
your display module through the micro-USB cable.
Touch Control
View/Select Contents
In the main screen, you can view all the contents, and select one to play in full screen.
Swipe up/down ---- view other contents Single-tap ---- select and play
3

Player Control
Tap to play/stop Swipe up/down ---- volume up/down
Swipe left/right ---- rewind/forward Pinch gesture ---- return to last screen
4

Charging
Please connect the device to standard adapter or power bank through USB type-C
cable, power supply should be 5V-2A.
Power Supply Port
Note: Do not use any power adapter or USB cables other than specified types. Otherwise
it may cause the device to malfunction, or even cause damage.
5

Specification
7.8 inches
AMOLED
1920*1440
308ppi
16.7M（3*8bit）
Multi-fingerprint
2GB RAM +32GB ROM
MP4, MKV, MOV, AVI, 3GP, FLV, M2TS, M2V, M4V, MPEG,
MPG, TS, VOB, WEBM, ASF
JPG, PNG, BMP, GIF
Screen Size
Dimensions
Weight
Main-case Material
198mm*142mm*9mm
Less than 100g
Polycarbonate
Screen Type
Resolution
PPI
Color Depth
Touch Sensor
Memory
Video Playing Format
Image Playing Format
Radio frequency information
2.4G WLAN
2.4G BT
2400MHz~2483.5MH
2400MHz~2483.5MHZ
Type Frequency Bands Max. Tx Power(Tune up)
12.5dBm
8dBm
6

Important Safety Instructions
1) Read these instructions-All safety and operating instructions should be read before.
2) Keep these instructions-The safety and operating instructions should be retained for
future reference.
3) Heed all warnings-All warnings on the apparatus and in the operating instructions
should be adhered to.
4) Follow all instructions-All operating and use instructions should be followed.
5) Clean only with dry cloth.
6) Only use attachments/accessories specified by the manufacturer.
7) Unplug the apparatus during lightning storms or when unused for long periods of
time.
8) CAUTION: These servicing instructions are for use by qualified service personnel
only. To reduce the risk of electric shock, do not perform any servicing other than that
specified in the operating instructions unless you are qualified to do so.
9) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in anyway, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the appara-
tus has been exposed to rain or moisture, does not operate normally, device has been
dropped.
7

Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Royole is under license. Other
trademarks and trade names are those of their respective owners.
EU Declarations of Conformity
Hereby, Royole Corporation declares that this device is in conformity with the Radio
Equipment Directive 2014/53/EU and RoHS Directive 2011/65/EU.
For the declaration of conformity, visit http://www.royole.com.
8
Warning
 Do not expose the apparatus to rain or moisture.
 Do not expose the apparatus to open flames, such as lighted candles.
 Do not expose the apparatus near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including) that produce heat.
 Do not expose the apparatus to dripping or splashing, and do not place objects filled
with liquids, such as vases, on the apparatus.
 Do not expose the apparatus to excessive heat.
 Do not move the apparatus by dragging the cable.

FCC Compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Warning
9