rst brands Asta OP-AWSS4-AST User manual

Asta 4pc seating set
Model: OP-AWSS4-AST
ASSEMBLY INSTRUCTIONS
IMPORTANT, RETAIN FOR FUTURE REFERENCE.
READ CAREFULLY.
For assistance with assembly or customer service,
call 1-877-924-2090 (English) Monday-Friday, 8 a.m. to 5 p.m. Mountain
Time, North America. Email: [e-mail] or visit
our website at www.rstbrands.com
RST Brands®Collection

1
PARTS LIST
NO PICTURE PART DESCRIPTION QTY.
ATop and bottom back slat 2
BCenter slat 1
CSeat 1
DArm 2
EBase rail 2
FCenter support leg 1
GScrew (M6 x 70) 4
HScrew (M6 x 35) 4
IBolt (M6 x 70) 4
JBarrel nut 4
KBolt (M6 x 35) 4
LBolt caps for (M6 x 35) 4
MAllen wrench 2

2
ATTACH BACK SLATS AND BASE RAILS TO SOFA ARM
1. Attach top and bottom back slats (A) to the sofa arm (D) using screws (G) and
Allen wrench (M).
2. Attach base rails (E) to the sofa arm (D) using bolts (I), barrel nuts (J), and Allen
wrenches (M).
Step 1.

3
INSERT CENTER BACK SLAT AND CONNECT REMAINING SOFA ARM
1. Insert the center back slat (B) into the assembled side of the sofa arm (D).
2. Attach remaining sofa arm (D) to the top and bottom back slats (A), the center
back support (B), and the base rails (E). Use screws (G), bolts (I), barrel nuts (J), and
Allen wrenches (M).
Step 2.

4
POSITION SEAT AND SECURE TO BASE RAILS
1. Position seat (C) on top of base rails (E).
2. Secure seat (C) to base rails (E) using screws (H) and Allen wrench (M).
Step 3.

5
ATTACH CENTER SUPPORT LEG TO SEAT  Attach the center support leg (F) to
the sofa seat (C) using bolts (K), bolt caps (L), and Allen wrench (M).
Step 4.

6
NO PICTURE PART DESCRIPTION QTY.
ATop and bottom back slat 2
BCenter slat 1
CSeat 1
DArm 2
EBase rail 2
FScrew (M6 x 70) 4
GScrew (M6 x 35) 4
HBolt (M6 x 70) 4
IBarrel nut 4
JAllen wrench 2
PARTS LIST

7
ATTACH BACK SLATS AND BASE RAILS TO CHAIR ARM
1. Attach top and bottom back slats (A) to the chair arm (D) using screws (F) and
Allen wrench (J).
2. Attach base rails (E) to the chair arm (D) using bolts (H), barrel nuts (I), and Allen
wrenches (J).
Step 1.

8
INSERT CENTER BACK SLAT AND CONNECT REMAINING CHAIR ARM
1. Insert the center back slat (B) into the assembled side of the chair arm (D).
2. Attach remaining chair arm (D) to the top and bottom back slats (A), the center
back support (B), and the base rails (E). Use screws (F), bolts (H), barrel nuts (I), and
Allen wrenches (J).
Step 2.

9
POSITION SEAT AND SECURE TO BASE RAILS
1. Position seat (C) on top of base rails (E).
2. Secure seat (C) to base rails (E) using screws (H) and Allen wrench (M).
Step 3.

10
PARTS LIST
NO PICTURE PART DESCRIPTION QTY.
ATable top 1
BLeg 2
CSupport rail 1
DBolt (M6 x 70) 6
EBarrel nut 6
Screw (M6 x 50) 2
Allen wrench 2

11
ATTACH TABLE LEG TO TABLE TOP  Attach table leg (B) to the table top (A) using
bolts (D), barrel nuts (E), and allen wrenches (G).
Step 1.

12
ATTACH SUPPORT RAIL TO TABLE LEG  Attach the support rail (C) to the table leg
(B) using bolt (D), barrel nut (E), and Allen wrenches (G).
ATTACH REMAINING TABLE LEG AND CONNECT SUPPORT RAIL  Attach the
remaining table leg (B) to the table top (A) while connecting support rail (C) to table
leg (B). Use bolts (D), barrel nuts (E), and Allen wrenches (G).
Step 2.
Step 3.

13
SECURE TABLE TOP TO TABLE LEGS USING SCREWS  Further secure the table top
(A) to the table legs (B) using screws (F) and Allen wrench (G).
Step 4.

14
Care and Maintenance
All outdoor furniture is subject to UV rays and weather elements. In order to keep your
furniture as long lasting and vibrant as possible, we advise using furniture covers or
storing the furniture when not in use. For more information about the materials used
to make our furniture please visit www.rstbrands.com/details-landing
WICKER
Simply washing your wicker with a mild detergent and
protecting it as much as possible by covering and or storing
it when not in use for long periods of time is sucient.
WOOD FRAMES
Make sure all surfaces are protected from heat and liquids. Wipe up
spills immediately and do not place furniture next to a heat source
such as radiators or res. All timber surfaces may change color. Spray
polishes are best to avoid as they contain silicones which may spoil
the surface by building up overtime. Check bolts and screws regularly
and tighten when necessary.
STONE TOPS/ TABLE TOPS
Spills should be wiped up quickly to avoid any staining on
the surface. Regular cleaning with mild soap and water with
a sponge or soft scrub brush is all that is required. Storing or
covering your natural stone top when not in use for extended
periods of time is recommended.
FABRICS
Wipe o spills with a cloth and water. RST Brands uses Sunbrella®
fabrics designed to protect and last for several years. Sunbrella
fabrics are treated with a proprietary water and stain repellent.
If needed to revive fabrics Glen Raven® recommends 303® Fabric
Guard™. For more information visit www.303products.com and
follow instructions on the container.

15
WARRANTY
Welcome to the RST Family
How it Works
Here to Help
Here at RST Brands® we are committed to your satisfaction by oering you a competitive warranty
to ensure all of our products are free from defects, in material and workmanships, to the original
purchaser for a period of one year from the date of your purchase.
We are happy to furnish a replacement at no cost to you in the case we determine a component
to be defective. While our warranty applies to conditions of normal use, it does not apply to
defects or damage resulting from intentional or accidental damage, outdoor use. negligence,
or unreasonable use.
Please immediately report any defect to RST by calling [phone] or send an email to t@rst-
brands.com. Have your receipt and order number handy for our team of customer service profession-
als that will be eager to assist you.
For assistance with assembly or customer service,call 1-877-924-2090 (English) Monday-Friday,
8 a.m. to 5 p.m. Mountain Time, North America. Email: customerser[email protected]om
or visit our website at www.rstbrands.com

Ensemble de 4 pièces Asta
Modèle: OP-AWSS4-AST
INSTRUCTION D’ASSEMBLAGE
IMPORTANT, À CONSERVER À TITRE DE RÉFÉRENCE. À LIRE
ATTENTIVEMENT.
Pour de l’aide a l’assemblage ou le service a la clientèle, composez le 1-877-924-2090 (Anglais) Lun-
di - Vendredi 8 heures - 17 heures, heure des Rocheuses, en Amérique du Nord.
Émail: [email protected] ou visitez notre site Web a rstbrands.com
RST Brands®Collection

1
LISTE DES PIÈCES
NO IMAGE RÉFÉRENCE DESCRIPTION QTÉ
ALatte arrière supérieure et inférieure 2
BLatte centrale 1
CSiège 1
DBras 2
ERail de base 2
FPied de support central 1
GVis (M6 x 70) 4
HVis (M6 x 35) 4
IBoulon (M6 x 70) 4
JÉcrous à barillet 4
KBoulon (M6 x 35) 4
LBouchons de boulons (M6 x 35) 4
MClé Allen 2

2
FIXEZ LES LATTES ARRIÈRE ET LES RAILS DE BASE AU BRAS DU CANAPÉ
1. Fixez les lattes arrière supérieures et inférieures (A) au bras du canapé (D) à
l'aide de vis (G) et d'une clé Allen (M).
2. Fixez les rails de base (E) au bras du canapé (D) à l'aide de boulons (I), d'écrous
cylindriques (J) et de clés Allen (M).
Étape 1.

3
INSÉREZ LA LATTE ARRIÈRE CENTRALE ET CONNECTEZ LE BRAS DE CANAPÉ RESTANT
1. Insérez la latte centrale arrière (B) dans le côté assemblé du bras du canapé (D).
2. Fixez le bras de canapé restant (D) aux lattes arrière supérieures et inférieures (A),
au support central arrière (B) et aux rails de base (E). Utilisez des vis (G), des boulons
(I), des écrous à barillet (J) et des clés Allen (M).
Étape 2.