RTscan RT212 Instruction manual

RT212 Quick User Guide
RT212 Quick User Guide
(For PDF417 Reading)
Thank you for choosing RTscan, this guide will help you to use RT212 easily.
Index
1. USB-HID KBW ......................................................................................................................2
2. USB-COM (USB COM Port Emulation).................................................................................4
3. RS232 Serial Port.................................................................................................................7
4. TTL Interface......................................................................................................................10
5. Instruction Documents Download.....................................................................................11
6. Programming Guide...........................................................................................................11

RT212 Quick User Guide
1. USB-HID KBW
If your RT212 come with USB interface, the default setting is USB-HID KBW, it's plug and play,
connect the scanner with your computer and run Notepad / MS Word, after reading the
barcode, the decoded data will be shown there.
For the connection of the connector, please refer to the picture below.

RT212 Quick User Guide

RT212 Quick User Guide
2. USB-COM (USB COM Port Emulation).
If your RT212 come with USB-COM (USB COM Port Emulation), you will need to have
a software that can work with a virtual serial port to test the scanner.
You can use your own Virtual Serial Tool, or download the Virtual Serial Tool at the
following link :
https://drive.google.com/open?id=1djokTmXZJAlDSehhI_7EMugiCazIkP5N
Please do the following steps to use the reader with USB Virtual COM.
①Connect the reader with your PC or terminal.
②In most cases, the computer will install the driver automatically, if not, please contact
our sales to get the driver.
③Confirm the COM port number at Device Manager as below picture, below is the COM13.
④Run a virtual serial port tool, then pick the exact COM port number (like the above is
COM13) and also the correct baud rate 9600 (default baud rate is 9600).

RT212 Quick User Guide
For the connection of the connector, please refer to the picture below.

RT212 Quick User Guide

RT212 Quick User Guide
3. RS232 Serial Port
If your RT212 come with RS232 interface, you will need to have a software that can
work with a serial port to test the scanner.
You can use your own Virtual Serial Tool, or download the Virtual Serial Tool at the
following link :
https://drive.google.com/open?id=1djokTmXZJAlDSehhI_7EMugiCazIkP5N
Please do the following steps to use the reader with RS232 serial port.
①Connect the reader with your PC or terminal.
②Confirm the COM port number at Device Manager as below picture, below is the COM13.
③Run a virtual serial port tool, then pick the exact COM port number (like the above is
COM13) and also the correct baud rate 9600 (default baud rate is 9600).

RT212 Quick User Guide
For the connection of the connector, please refer to the picture below.

RT212 Quick User Guide

RT212 Quick User Guide
4. TTL Interface
If your RT212 come with TTL interface, for the connection of the connector, please refer to
the picture below.

RT212 Quick User Guide
5. Instruction Documents Download
You can kindly download the instruction documents of reader at the following link :
https://drive.google.com/open?id=13HVARg5IAeFSJ8a5EFXYgtTiQG0Qg0yT
Inclused:
Integration Guide
User Guide
Data sheet
6. Programming Guide
You can program the barcode reader by commands, kindly refer to the RT212 User
Guide Page 15 - Page16.
If you need any other technical support from RTscan, please feel free to contact us:
[e-mail], thank you!