RTscan RT870 Instruction manual

RT870 Quick User Guide
RT870 Quick User Guide
Thank you for choosing RTscan, this guide will help you to use RT870 easily.
Index
1. Outlook................................................................................................................................... 2
2. USB-HID KBW........................................................................................................................ 3
3. USB-COM (USB COM Port Emulation)..................................................................................4
4. RS232 Serial Port................................................................................................................... 6
5. Instruction Documents Download....................................................................................... 8
6. Programming Video Guide....................................................................................................8

RT870 Quick User Guide
1. Outlook

RT870 Quick User Guide
2. USB-HID KBW
If your RT870 come with USB interface, the default setting is USB-HID KBW, it's plug and play,
connect the scanner with your computer and run Notepad / MS Word, after reading the
barcode, the decoded data will be shown there.

RT870 Quick User Guide
3. USB-COM (USB COM Port Emulation).
If your RT870 come with USB-COM (USB COM Port Emulation), you will need to have
a software that can work with a virtual serial port to test the scanner.
You can use your own Virtual Serial Tool, or download the Virtual Serial Tool at the
following link :
https://drive.google.com/open?id=1djokTmXZJAlDSehhI_7EMugiCazIkP5N
Please do the following steps to use the reader with USB Virtual COM.
①Connect the reader with your PC or terminal.
②In most cases, the computer will install the driver automatically, if not, please contact our
sales to get the driver.
③Confirm the COM port number at Device Manager as below picture, below is the COM13.
④Run a virtual serial port tool, then pick the exact COM port number (like the below is
COM10) and also the correct baud rate 115200 (default baud rate is 115200).

RT870 Quick User Guide

RT870 Quick User Guide
4. RS232 Serial Port
If your RT870 come with RS232 interface, you will need to have a software that can
work with a serial port to test the scanner.
You can use your own Virtual Serial Tool, or download the Virtual Serial Tool at the
following link :
https://drive.google.com/open?id=1djokTmXZJAlDSehhI_7EMugiCazIkP5N
Please do the following steps to use the reader with RS232 serial port.
①Connect the reader with your PC or terminal.
②Confirm the COM port number at Device Manager as below picture, below is the COM13.
③Run a virtual serial port tool, then pick the exact COM port number (like the below is
COM13) and also the correct baud rate 115200 (default baud rate is 115200).

RT870 Quick User Guide
For all of Default serial communication parameters and baud rate setting, same with
above for “USB COM Port Emulation”

RT870 Quick User Guide
5. Instruction Documents Download
You can kindly download the instruction documents of reader at the following link :
https://drive.google.com/file/d/16woH4PKEhfpzjsBv859qfEaO4gSe0c3U/view
Inclused:
Integration Guide
User Manual
Programming Commands Guide
Datasheet
6. Programming Video Guide
You can program the barcode reader by commands, kindly refer to our video guide
as below.
https://youtu.be/LsX7aeaME00 -------Command programming guide
The barcode reader can be program by setting codes as well, please refer to the
RT870 User Guide.
If you need any other technical support from RTscan, please feel free to contact us:
[e-mail], thank you!