Ruida Technology RDC6685U User manual

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
RDC6685U(-DFM)
Control System manual
Read this manual before operation
The content include of electric connections and operating steps
Read the manual to operate the systems
RuiDa Technology Co., Ltd
Add: Unit 202，Block B, Technology Building, NO., 1067 Nanhai
Avenue, Nanshan District, Shenzhen city, Guangdong
Province, P.R.China P.C:518054
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.rd-acs.com
https://www.ruidacontroller.com

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
COPYRIGHT
All rights reserved.You may not reproduce, transmit, store in a
retrieval system or adapt thispublication, in any form or by any means,
without the prior written permissionof RuiDa, except as allowed
under applicable copyright laws. We have identifiedwords that we
consider as trademarks. Neither the presence or absence oftrademark
identifications affects the legal status of any trademarks.

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
CERTIFICATION DECLARATION
CE
The product has been certified by the CE (Commutate European) safety certification. It has
passed the corresponding conformity assessment procedure and the manufacturer's
declaration of conformity, in accordance with the relevant EU directive.
ROHS
This product has been certified by EU legislation (Restriction of Hazardous Substances)
Safety certification; comply with relevant EU environmental regulations.
FCC
This product has been certified by the Federal Communications Commission for safety,
Comply with us electronic safety regulations.

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
SAFETY INFORMATION
When using this system, please make sure the operation is correct and the usage is safe.
Some signs or text will be used to remind you to pay attention to the dangerous matters and
some important information.
Dangerous：
Indicates a serious danger. In the process of use, if the operation is
improper or the way of use is wrong, it may cause serious injury or even
death to the user. Please do not operate it easily until you have made sure
that the operation method is correct and the way of use is correct.
Warning：
Danger.n the process of use, if the operation is improper or the use is
wrong, which may lead to the injury of the personnel, please do not
operate the personnel and related personnel easily, until ensure the correct
operation method and use method is correct before use.
Cautious：
Represents the potential risk of the product. In the process of use, if the
use method is wrong or improper operation, it may cause damage to the
product or some parts. Please do not use it until you have made sure that
the operation method is correct and the usage is correct.
Important：
Represents important information to be paid attention to during the use of
the product.Please do not ignore this information, this information will
provide effective operational help.
This sign indicates laser radiation, which is usually posted on products with
laser output. Please be careful with laser and pay attention to safety when
using this kind of equipment.

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
Sign in、Devanning、Examine cargo
The product itself with plastic or metal shell, can protect the external electrical components
from damage. The products are packed in foam bags and anti-static bags. If there is any
external damage to the package, check the equipment and notify the carrier and carrier in
writing of the damage.
Inportant:
After receiving the product, please check whether the outer package is intact,
check whether the product is complete after unpacking and whether all parts
are intact. If any damage is found, please contact ruida immediately.
Remove all cargo from package and keep packing material and wiring parts. Please take care
of the safety of the goods when unpacking them.After taking out the goods, please check
whether the parts are complete and intact. If any missing parts or damaged parts are found,
please contact ruida technology immediately.Do not install or debug the equipment if any
obvious damage is found.

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
1
Contents
Section 1 Overview..................................................................................................................................... 3
1.1 BRIEFING..................................................................................................................................................4
1.2 DESCRIPTION OF CONTROLLER MODEL.................................................................................................. 4
1.3 LIST OF CONTROLLER FUNCTIONS.......................................................................................................... 5
Section 2 Installation Size.......................................................................................................................... 7
2.1 INSTALLATION SIZE OF MAINBOARD...................................................................................................... 8
2.2 SIZE OF PANEL.........................................................................................................................................8
Section 3 Object Pictures and Interfaces.............................................................................................. 10
3.1 OBJECT PICTURES OF MAINBOARD.......................................................................................................12
3.2 OBJECT PICTURES OF PANEL................................................................................................................. 13
3.3 ELECTRIC CONNECTION......................................................................................................................... 14
3.4 LAMP INSTRUCTION............................................................................................................................... 15
3.5 INTERPRETATION OF DUAL Y/DUAL XCOORDINATE..............................................................................16
Section 4 Description of Interface Signal for MainBoard....................................................................17
4.1 INTERFACE OF MAIN POWER SOURCE CN0...........................................................................................19
4.2 PANEL SIGNAL-CABLE INTERFACE HMI...............................................................................................19
4.3 UDISK INTERFACE..................................................................................................................................19
4.4 PC-USB INTERFACE.............................................................................................................................. 19
4.5 ETHERNET INTERFACE........................................................................................................................... 19
4.6 EXTENDED COMMUNICATION PORT CN1..............................................................................................19
4.7 GENERAL INPUT.....................................................................................................................................20
4.8 GENERAL OUTPUT................................................................................................................................. 21
4.9 8-AXLE SPACING INPUT INTERFACE...................................................................................................... 22
4.10 8-AXLE MOTOR DRIVER INTERFACE.................................................................................................... 23
4.11 LASER POWER CONTROL INTERFACE L1-L4....................................................................................... 24
Section 5 Examples of Laser Power Interface..................................................................................... 26
5.1 BRIEF..................................................................................................................................................... 27
5.2 EXAMPLES OF GLASS TUBE LASER POWER........................................................................................... 28
5.3 EXAMPLES OF RF-LASER...................................................................................................................... 29
Section 6 Examples of Driver Interface for Step-servo Motor........................................................... 30
6.1 BRIEF..................................................................................................................................................... 31
6.2 EXAMPLES OF MOTOR DRIVER CONNECTION........................................................................................28
Section 7 Examples of IO-port Wiring....................................................................................................29
7.1 INPUT AND OUTPUT PORT WIRING EXAMPLE......................................................................................... 30
Section 8 Operating Instruction of Panel...............................................................................................32
8.1 BRIEF..................................................................................................................................................... 33
8.1.1 Overview........................................................................................................................................ 33
8.1.2 Introduction to the Keys.................................................................................................................34
8.2 THE MAIN INTERFACE............................................................................................................................ 35
8.3 SPEED SETTING......................................................................................................................................36
8.4 SET THE LAYER PARAMETERS.................................................................................................................37

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
2
8.5 MENU FUNCTION................................................................................................................................... 38
8.5.1 User parameters..............................................................................................................................38
8.5.2 Vender parameters..........................................................................................................................41
8.5.3 Origin Setting.................................................................................................................................42
8.5.4 Backup parameters.........................................................................................................................44
8.5.5 Restore parameters.........................................................................................................................44
8.5.6 Max/Min Power Setting.................................................................................................................44
8.5.7 Permission Settings........................................................................................................................45
8.6 CONTROLLER SETTING...........................................................................................................................46
8.6.1 Language........................................................................................................................................ 46
8.6.2 Screen origin.................................................................................................................................. 47
8.6.3 Wireless panel................................................................................................................................ 47
8.6.4 IP Setting........................................................................................................................................ 48
8.6.5 System Info.................................................................................................................................... 49
8.6.6 Time Settings..................................................................................................................................49
8.7 FUNTIONS...............................................................................................................................................50
8.7.1 Axis reset........................................................................................................................................50
8.7.2 Keyboard lock................................................................................................................................ 51
8.7.3 Manual setting................................................................................................................................51
8.7.4 Laser Setting...................................................................................................................................52
8.7.5 Diagnose.........................................................................................................................................53
8.7.6 Laser power infomation................................................................................................................. 53
8.8 FILE MANAGEMENT...............................................................................................................................54
8.8.1 Memory File...................................................................................................................................54
8.8.2 Memory operation..........................................................................................................................56
8.8.3 Format memery.............................................................................................................................. 56
8.8.4 U disk file.......................................................................................................................................57
8.9 PASSWORD INPUT AND SETTINGS...........................................................................................................58
8.9.1 Password Input...............................................................................................................................58
8.9.2 Password Setting............................................................................................................................ 58
8.10 PROMPT AND ALARM INFORMATION....................................................................................................59
Section 9 Manufacturer/User Parameters Explanation.......................................................................61
9.1 MANUFACTURER PARAMETERS..............................................................................................................62
9.2 USER PARAMETERS................................................................................................................................ 66

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
3
Section 1 Overview
CONTENTS:
Briefing
Description of Controller Model
List of controller functions

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
4
1.1 Briefing
RDC6685U(-DFM) system is the latest generation of dual X / Y coordinate system controller
developed by Ruida technology. The control system has better hardware stability and better
anti-voltage and anti-static interference characteristics. The HMI based on 5-inch color screen has
more friendly operation interface and more powerful functions. RDC6685U is a common dual
coordinate system controller, and RDC6685U-DFM is a panoramic vision dual coordinate system
controller.
The system uses double coordinate system control technology to realize the synchronous
start of the double head, and asynchronous cutting, independent of each other and processing
separately. At the same time, the system provides automatic collision prevention function. The
software system adopts optimized graphics management and allocation algorithm, which greatly
improves the balanced distribution of double head tasks, and makes the cutting efficiency of
single equipment increase by more than 90%.
The system also provides the functions of automatic feeding, ultra long format segmentation
and cutting, which provides a perfect solution for the large graphics, large batch and high
efficiency processing tasks in garment, leather, cloth and other processing industries.
1.2 Description of Controller Model

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
5
1.3 List of Controller Functions
RDC6685U(-DFM)
Power Feature
Only one-way 24V (3A and above drive capability)
Laser Port Feature
4-way laser port, digital and analog supported
USB Feature
Copying Speed
Very Quick
Compatibility
Support all USB disks with different capacities
Memory Feature
Capacity
256M
Fault Tolerance
Capable of checking defective track and formatting and
good in fault tolerance
General IO
Feature
Input Port
16 channel limit input and 16 channel general input
Output Port
21-ways (300mA high current for each, OC output,
reverse current protection included)
Controller
Software Feature
Parameter Backup
Logics
YES
Online Update HMI
Program
YES
Online Update
Mainboard Program
YES
Double coordinate
system machining
support
YES
Panoramic vision
Optional
Display
Feature
Online Modification
Laser Power/Speed
YES
Offline Modification
Layer parameters
YES
File dynamic/static
preview
YES
Modification
Factory/User’s para
on display
YES
Display type
5 inch TFT display
Motion-axle
Feature
Soft Spacing
YES
Hard Spacing
YES
Auxiliary axis
movement
YES
Feeding Feature
Single/double direction for option
Automatic split head
-double head array
machining
YES
Key move step or
continuity
Configurable
Power on and reset
each axis
Configurable
Axles
8
Encryption
Motherboard integrated time system, authorization code

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
6
Feature
hardware encryption
Communicate
Mode
10/100MHZ Ethernet or USB2.0, communication mode is
automatically checked

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
7
Section 2 Installation
Size
CONTENTS:
Installation Size of
MainBoard
Size of Panel

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
8
2.1 Installation Size of MainBoard
The unit of all sizes is millimeter (mm) and the size accurate to 0.1mm (the four holes are
symmetrical)
2.2 Size of Panel
The unit of all sizes is millimeter (mm) and the size accurate to 0.1mm.

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
9

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
10
Section 3 Object
Pictures and Interfaces
CONTENTS:
Object Pictures of
MainBoard
Object Pictures of
Panel
Electric connection
Lamp instruction
Interpretation of dual Y
/dual X coordinate

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
11

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
12
3.1 Object Pictures of MainBoard
For more detailed pin description, see the Chapter 4: Description of Interface Signal for
MainBoard.
Figure: 3.1-1 Object Picture of MainBoard

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
13
3.2 Object Pictures of Panel
Figure: 3.2-1 Object Picture of Panel

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
14
3.3 Electric connection
Figure 3.3-1 electric
connection

RDC6685U(-DFM) Control System manual
SHENZHEN RUIDA TECHNOLOGY
15
3.4 Lamp instruction
RDC6685U(-DFM) have 22 red lamps:
NUMBER
NAME
SENSE
1
LmtX1-
X1 axis negative limit
2
LmtY1-
Y1 axis negative limit
3
LmtZ1-
Z1 axis negative limit
4
LmtU1-
U1 axis negative limit
5
LmtX2-
X2 axis negative limit
6
LmtY2-
Y2 axis negative limit
7
LmtZ2-
Z2 axis negative limit
8
LmtU2-
U2 axis negative limit
9
WP1
Indication for water protect 1
10
WP2
Indication for water protect 2
11
WP3
Indication for water protect 3
12
WP4
Indication for water protect 4
13
L-ON1
Light output indication for laser1
14
L-ON2
Light output indication for laser2
15
L-ON3
Light output indication for laser3
16
L-ON4
Light output indication for laser4
17
Run
the normal running status
18
Err1
System fault indicator1
19
Err2
System fault indicator2
20
Link
Ethernet connection
21
Act
Ethernet communication
22
+5V
+5V power supply