Rungu Rear Rack User manual

V1.1 Rungu Rear Rack owner’s manual –Use with Electric Juggernaut
Copyright 2017 Standard Bearer Machines, LLC Page 1of 17
rungu®rear rack owner
manual - use with the rungu
electric juggernaut
Congratulations on purchasing the Rungu Rear Rack for your Rungu Electric Juggernaut
1
!This document
reviews the installation and capabilities of the rear rack. Before you ride with your Rear Rack, please
read the following instructions carefully.
IMPORTANT- Standard Bearer Machines will not be liable for any damage or injury that may occur due
to the use of our products. By using the Rear Rack, you are agreeing to Standard Bearer Machines, LLC
Terms and Conditions and the warnings and conditions included in this document.
1
As the owner, you agree and are bound by all sales and transfer conditions as defined in “SBM Rungu Sales Terms
and Conditions US 2017a” or “SBM Rungu Sales Terms and Conditions US 2017 –Demo Model.” Copies of these
documents are available on the USB drive that ships with the product or upon request by e-mailing
[email protected].

V1.1 Rungu Rear Rack owner’s manual –Use with Electric Juggernaut
Copyright 2017 Standard Bearer Machines, LLC Page 2of 17
Contents
Parts, Features and specifications ................................................................................................................3
Parts identification.................................................................................................................................... 3
Top/Plan View Dimensions (inches) ......................................................................................................... 5
Rear/elevation view dimensions (inches).................................................................................................6
Side/elevation view dimensions ............................................................................................................... 6
Installation and removal instructions ...........................................................................................................7
Tools required........................................................................................................................................... 7
Preparation ...............................................................................................................................................7
Installing the Rear Triangle Mounting Plate ............................................................................................. 8
Installing the Rear Rack............................................................................................................................. 9
Removing the Rear Rack .........................................................................................................................14
Further questions........................................................................................................................................ 17

V1.1 Rungu Rear Rack owner’s manual –Use with Electric Juggernaut
Copyright 2017 Standard Bearer Machines, LLC Page 3of 17
Parts, Features and specifications
Parts identification
Warning: The Rear Rack center stiffener can be removed from the Rear Rack Assembly. Because the
Rear Rack Center Stiffener increases the overall strength of the Rear Rack Assembly, DO NOT remove
it. Removing the stiffener reduces the carrying capability to less than 100 lbs. (45kg).
Not shown
•2 ea. 20mm M6 socket head cap screws and washers
•Left side torque arm (factory installed if purchased with Electric Juggernaut)
•Right side torque arm (factory installed if purchased with Electric Juggernaut)

V1.1 Rungu Rear Rack owner’s manual –Use with Electric Juggernaut
Copyright 2017 Standard Bearer Machines, LLC Page 4of 17
Features and specifications
The Rear Rack was designed with outdoor adventure and practicality in mind. The rack is designed to
support an evenly-distributed load of 200 lbs. The rack has more than 32 places to hook a bungee cord,
webbing or the end of a strap to fasten your payload. The rack also has 6 embedded M8 nuts on the top
surface for eye-bolts and other anchors. There are 4 embedded M6 nuts on the right side for additional
racking for side carrying equipment too long to be laid flat.
Warning: Carrying loads of more than 100 lbs. (45 kg) requires significantly longer braking distances
and changes the ride characteristics of the Rungu Electric Juggernaut. Operate the Electric Juggernaut
with caution.
Warning: DO NOT USE THE REAR RACK TO CARRY PASSENGERS. The Rear Rack is not designed to carry
passengers. Standard Bearer Machines will not be liable for any injury that may occur to a passenger
riding on the Rear Rack or to the person controlling the Electric Juggernaut while carrying a passenger
on the Rear Rack. Standard Bearer Machines, LLC will not be liable for any damage to equipment
because of carrying a passenger on the Rear Rack.

V1.1 Rungu Rear Rack owner’s manual –Use with Electric Juggernaut
Copyright 2017 Standard Bearer Machines, LLC Page 5of 17
Top/Plan View Dimensions (inches)