Rush TANK Series User manual

TANK Series 5.8GHz Video Transmitter
USER MANUAL
WARNINGS Read this user manual before use.
!
● The user needs to have relevant professional knowledge while mounting or operating the VTX product, any illegal use
may cause potential danger.Please ensure that you have the skills of operating radio equipments, or operate under the
guidance of a professional.Read this manual carefully before you use.For those who ignore the following statement or
violate the operating regulations, the user assumes the responsibility for any personal injury and property damage.
● The VTX will generate a lot of heat while normal working, please ensure adequate airiflow to provide a well-ventilated
environment, and direct touch may cause burns.Please ensure all the cables and plugs are installed correctly.Before
powering up, please ensure the antenna has been installed correctly to the VTX RF output.There are a large number of
precision components in the VTX, please do not disassemble, repair or modify this product personally.Contact your dealer
for technical support when the VTX breakdown.
●Please follow the local radio regulations, HAM licensed is required for operating on HAM channels, and HAM power
levels, some channels need to be notified to the local radio regulatory agency before use. Ensure you are in accordance
with all local laws and regulations about the drones and radio. It is strictly forbidden to fly in the no fly zone such as
airport, military facilities and over corwds.
Specifications
Botton function
Power 25-200-500-800mW
No
RUSH LOCK-ON TECH TBS SmartAudio
No
48CH (US version has 37 channels)
7-36V DC IN
AGC MIC
Built-in Support audio input
7-26V DC IN
25-50-200-500mW
Channel
Voltage
Audio
Software
TANK ULTIMATE TANK ULTIMATE PLUS / RACING TANK ULTIMATE MINI
PROFESSIONAL
FPV VIDEO
TRANSMITTER MODULE
5.8G H Z
Model
:
TANK
48CH 0-25-200-500-800mW 7-25V 5VDC IN DC OUT
TBS SMARTAUDIO INSIDE
TM
ANT
MMCX
POWER/PIT
7-36V HVDC-IN
5V 1A DC-OUT
SMARTAUDIO
LOCK-ON TECHNOLOGY
INSIDE
AGC
MIC
7-36V
ULTIMATE ULTIMATE ULTIMATE RACING
36*36*4.5mm 23.5*34*4.5mm
30-30.5mm spacing holes
6.8g
28*29*4.8mm
20mm spacing holes
5.2g6.6g
21.5*34*4mm
5.7g
Press to set 1-8 channes, press and hold to set band.
Press to set transmit power, press and hold to switch PIT mode.
PWR PWR PWRFREQ FREQ FREQ
FREQ
PWR PWR
FREQ
PLUS MINI

LED DISPLAY
SmartAudio
The TANK Series VTX uses 4 red channel LEDs, 3 blue band LEDs, and one RGB power LED.
They display the VTX status in real time and can be linked to the SmartAudio control.
RUSH TANK has built-in SmartAudio Control Protocol.After the VTX is connected to the FC
or CF receiver, the VTX parameters can be quickly set via the OSD or radio control.
1.Connect the smartaudio port to the Flight
controller Free UART-TX
2.Open BetaFlight configurator, Goto Ports
tab, Select TBS SmartAudio from Peripherals
drop down menu, Speed can be left at
AUTO.and save settings
4.In FEATURES > VTX SA menu,you can set
the transmit frequency and power.
3.Turn on the radio control,THR middle,YAW
left,PITCH up,Enter the OSD menu.
Frequency table
Power table
For more information please visit：https://github.com/betaflight/betaflight/wiki/Unify-Smartaudio
CHANNEL BAND A BAND B BAND E BAND F RaceBAND LowRace
5865
5845
5825
5805
5785
5765
5745
5725
5733
5752
5771
5790
5809
5828
5847
5866
5705
5685
5665
5645
5885
5905
5925
5945
5740
5760
5780
5800
5820
5840
5860
5880
5658
5695
5732
5769
5806
5843
5880
5917
5362
5399
5436
5473
5510
5547
5584
5621
!
!
!
!
!
!
!
!
!
!
!
!
!
!
The selections in requires HAM license to operate.legally. selections are only available on special request.
Power LED color
ULTIMATE Series
RACING Series
GREEN
25mW
25mW
RED
500mW
200mW
PURPLE
800mW
500mW
YELLOW
200mW
50mW
1
2
3
4
5
6
7
8
LED OFF LED FLASH LED ON
Mode-2 Mode-1
VTX FC UART
SA TX
RX
Peripherais
Disabled
Disabled
Blackbox logging
VTX（TBS SmartAudio）
VTX（TBS Sma
VTX（IRC Tramp）
Camera（RunCam Protocol）
Benewake LIDAR
AUTO
AUTO
5820
FATSHARK
5
25
- SMARTAUDIO -
R F5 5820 25
>BAND
>
>
CHAN
(FREQ)
POWER
SET
CONFIG
BACK
Device status
Band selection
Channel selection
Frequency of selected band and
channel（not selectable；read only）
RF power selection
Commence current selection
Configuration menu
SmartAudio VTX top menu（Band/Channel mode）