Russell Hobbs PRO ELITE RHFP001 Installation guide

INSTRUCTIONS AND WARRANTY
MODEL NO. RHFP001
RUSSELL HOBBS PRO ELITE 8-IN-1 FOOD PROCESSOR

2
Congratulations on purchasing our Russell Hobbs Pro Elite 8-in-1 Food Processor. Each
unit is manufactured to ensure safety and reliability. Before using this appliance for the
first time, please read the instruction manual carefully and keep it for future reference.
FEATURES OF THE RUSSELL HOBBS Pro Elite 8-in-1 FOOD PROCESSOR
•1000W
•2 speed control plus pulse for precise start and stop control
•Stylish silver aluminium and black design
•Extra-large 75mm feed chute
•Non-slip rubber feet for stability
•The Pro Elite Food Processor includes the following accessories:
- dough tool
- stainless steel slicing/chopping/mixing blade
- stainless steel reversible thin slicing and fine shredding disc
- stainless steel rasping/grating disc
- stainless steel chip slicing disc
- citrus juicing attachment
- 1.5L glass blender jug
- plastic 1.2L food processing bowl with maxi blend canopy
•Double safety lock system
•Blue illuminated control panel
•For domestic use only
•2 year warranty (1 year retail • 1 year extended upon online registration of
product • visit www.russellhobbs.co.za)
IMPORTANT SAFEGUARDS
When using any electrical appliance, basic safety precautions should always be followed
including the following:
1. Please read the instructions carefully before using any appliance.
2. Always ensure that the voltage on the rating label corresponds to the mains
voltage in your home.

3
3. Incorrect operation and improper use can damage the food processor and cause
injury to the user.
4. This food processor is intended for household use only. Commercial use invalids
the warranty and the supplier can not be held responsible for injury or damage
caused when using the appliance for any other purpose than that intended.
5. Avoid any contact with moving parts.
6. This food processor is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
7. Children should be supervised to ensure that they do not play with the food
processor.
8. Check the power cord and plug regularly for any damage. If the cord or the plug
is damaged, it must be replaced by the manufacturer or a qualified person in
order to avoid an electrical hazard.
9. Do not use the food processor if it has been dropped or damaged in any way. In
case of damage, take the unit in for examination and/or repair by an authorised
service agent.
10. To reduce the risk of electric shock, do not immerse or expose the motor
assembly, plug or the power cord to water or any other liquid.
11. Never immerse the unit in water or any other liquid for cleaning purposes.
12. Remove the plug from the socket by gripping the plug. Do not pull on the cord to
disconnect the appliance from the mains. Always unplug the unit when not in
use, before cleaning or when adding or removing parts.
13. The use of accessory attachments that are not recommended or supplied by the
manufacturer may result in injuries, fire or electric shock.
14. Care must be taken when dismantling and assembling the blender as the blades
and discs are very sharp.
15. Never reach with your fingers into the feed chute.
16. Never place hard objects into the processor, the blades could become blunt. This
process may also result in injury.
17. The maxi blend should only be removed when the tools/blades /discs/ are
stationary.
18. Do not fill the processing bowl with hot liquids (only cold or warm liquids).

4
19. The appliance can be used for up to 1 minute without stopping (this is one cycle).
Ensure the appliance is cooled down for at least 2 minutes after each cycle. After
the 3rd cycle the food processor should be switched off for 5 minutes.
20. Always remove the tools/blades/discs and spindles before removing the contents
of the bowl.
21. Do not exceed the maximum filling volume.
22. Please be careful with the metal blade, it is extremely sharp, store it with the
blade protector fitted.
23. A short cord is provided to reduce the hazards resulting from becoming
entangled in or tripping over a longer cord.
24. Do not let the cord hang over the edge of a table or counter. Ensure that the cord
is not in a position where it can be pulled on inadvertently.
25. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas
or electric burner or in a heated oven.
26. Do not use the food processor on a gas or electric cooking top or over or near an
open flame.
27. Use of an extension cord with this appliance is not recommended. However, if it
is necessary to use an extension lead, ensure that the lead is suited to the power
consumption of the appliance to avoid overheating of the extension cord,
appliance or plug point. Do not place the extension cord in a position where it can
be pulled on by children or animals or tripped over.
28. This food processor is not suitable for outdoor use. Do not use this appliance for
anything other than its intended use.
29. DO NOT carry the food processor by the power cord.
30. Do not leave this food processor unattended during use. Always unplug the unit
when not in use or before cleaning.
31. Always operate the appliance on a smooth, even, stable surface. Do not place
the unit on a hot surface.
32. Ensure that the switch is in the “Off” position after each use.
33. The manufacturer does not accept responsibility for any damage or injury caused
by improper or incorrect use, or for repairs carried out by unauthorised
personnel.

5
34. In case of technical problems, switch off the machine and do not attempt to repair
it yourself. Return the appliance to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentioned pre-cautions and instructions, could affect the
safe operation of this machine.
35. The appliance is fitted with a safety switch to prevent the motor operating unless
the food processor bowl or blender jug is in place. Do not use this to switch the
appliance on and off.
36. Do not use the appliance without first locking the lid in place.
37. Do not put your hand into the bowl or jug, even when it has been
removed for cleaning –the blades are very sharp.
38. Do not put any other object (spoon, spatula, etc.) into the bowl or jug while the
blender is plugged in.
39. Do not let the bowl or jug overflow. If liquid gets under the motor unit, it may be
sucked into the motor, damaging it.
40. Do not fill the bowl or jug above the MAX. mark. If you do, the contents may force
the lid off when you start the motor.
41. Do not use the appliance for any purpose other than those described in these
instructions.
42. Do not run the appliance empty, as it may overheat.
43. This appliance is designed for processing household quantities; it is not suitable
for commercial purposes. Use the appliance only for the purpose it was designed
for.
44. Do not run this appliance with an external timer or remote control system.
45. To avoid the danger of fire and/or explosion, do not use this appliance to stir/mix
paints or solvents.
Safety System
The processor will only operate once the maxi blend cover is fitted correctly.

6
PARTS DIAGRAM
(1) Safety pusher (11) Stainless steel reversible thin slicing/fine shredding disc
(2) Feed chute (12) Stainless steel chip slicing disc
(3) Maxi blend canopy (13) Stainless steel rasping/grating disc
(4) Removable drive attachment (14) Citrus press juicing cone
(5) Plastic food processor bowl (15) Citrus press attachment plastic strainer
(6) Motor shaft attachment (16) Blender measuring cap
(7) Rotor (17) Blender lid
(8) Motor body (18) Blending jug
(9) Dough tool (19) Sealing ring
(10) Stainless steel chopping/mixing/slicing blade (20) Blender base
PLEASE NOTE: When opening the box for the first time, the removeable drive attachment
(4) comes as one attachment joined with the dough tool (9). You would then have to
detach it when you need to use it with the stainless-steel chopping blade (10). To achieve
this, remove the dough tool by pressing on the drive attachment at the far end (close to
the tool) then slide up the dough tool to detach it from the drive attachment.

7
OPERATING INSTRUCTIONS
Locking the bowl/jug
Align the base and jug/bowl as illustrated. Turn the jug/bowl clockwise until it locks into
place. The jug/bowl will lock onto the base in 3 different positions for user
convenience.
NOTE: The food processor will not work unless the jug/bowl is locked into position.
Assembling the lid
Align the lid as illustrated by placing your thumb on the lid tab and twisting the lid
clockwise. Four visual alignment markers are provided, one on the bowl, one on the
handle and two on bowl lid. NOTE: The food processor will not work unless the lid is
locked into position.
Operating the controls
The control dial is conveniently located on the front of the base. Rotate the dial
clockwise to speed up. Rotate counter clockwise to slow down. For more precise

8
start/stop control, turn the dial clockwise to the (P) PULSE setting by rotating it counter
clockwise. To turn off the machine, rotate the dial to the OFF (O) position.
Processing tips and techniques
1. The food processor is excellent for chopping, mixing, slicing and shredding most
foods. However, to maintain peak performance, do not use your food processor
for the following: grinding grain, coffee beans or spices or slicing frozen meat.
2. To process the maximum capacity, use the stainless steel
chopping/slicing/mixing blade and add food no higher than the maximum fill line
on the plastic food processor bowl.
3. Operating time will depend on the quantity of the food being processed. Most
foods can be sliced, chopped, or shredded in seconds.
4. Do not puree or mash starchy vegetables like potatoes. They will be over
processed in a matter of seconds and turn gummy.
Processing using the stainless steel slicing/chopping/mixing blade
1. For a more uniform consistency, start with pieces of food that are similar in size.
Do not process 10cm pieces together with 1cm pieces for example.
2. The stainless steel slicing/chopping/mixing blade can be used to coarsely chop,
finely mince, mix, or puree food to a smooth consistency.
3. Make sure the control dial is turned to OFF (O) and the unit is unplugged.
4. Place the motor shaft attachment onto the motor body.
5. Lock the food processor bowl onto the motor body. (See “Locking the bowl”)
6. Place the removable drive attachment into the food processor bowl
7. Place the slicing/chopping/mixing blade onto the removable drive attachment of
the food processor in centre of the bowl. Turn slowly until the blade drops into
place. Handle carefully as the blade is sharp.
Removable drive
attachment
Chopping/mixing
blade
Motor shaft
attachment

9
8. Lock the lid onto the bowl.
9. Plug in the appliance and switch it on to process the food.
10. Process the food by pushing it through the feed chute with the safety pusher.
11. When finished processing, turn the dial to the OFF (0) position or release from
the PULSE position. Wait until the blade has stopped rotating before removing
the lid.
12. Unplug the appliance.
Processing using the stainless steel reversible thin slicing and fine
shredding disc
1. The reversible thin slicing/fine shredding disc has a slicing blade on one side
and shredding teeth on the other. The name engraved on the blade, facing
up, is the function selected.
2. Place the disc on the removable drive attachment with the desired cutting
edge facing up.
3. Make sure the control dial is turned to OFF (O) and the unit is unplugged.
4. Lock the bowl onto the base. (See “Locking the bowl”.)
5. Place the removable drive attachment on the motor shaft. Put the thin
slicing/fine shredding disc on the removable drive attachment with the
desired side facing up for either slicing or shredding. Lock lid onto bowl (See
“Assembling the lid”).
6. Plug in the appliance and switch it on to process the food.
7. Process the food by pushing it through the feed chute with the safety pusher.
Slicer/shredder
disc
Removable
drive
attachment
Motor shaft
attachment

10
Tips
•To slice or shred cheese, make use of firm cheese like, Cheddar, Monterey
Jack, or Swiss. Place the cheese in the freezer for 30 minutes before
processing for best results.
•To slice/shred longer shaped thin foods (such as pepperoni, carrots, and
celery) lock the lid. These foods can be inserted into the feed chute opening
and processed as long as the feed chute lid is closed. Always use the
safety pusher to feed food into the chute.NEVER PUSH FOOD
THROUGH THE FEED CHUTE WITH HANDS, FINGERS, UTENSILS OR
ANY OTHER OBJECTS.
Select speed
•While pressing down the safety pusher, rotate the control dial for optimum
slicing and shredding performance or set it to PULSE mode.
•NOTE: The feed chute lid is designed to pivot towards the right when processing
food that fills the whole feed chute capacity.
Processing using the citrus juicer
Citrus press
juicing cone
Citrus press
plastic strainer
Motor shaft
attachment

11
1. Make sure the control dial is turned to the OFF (O) position and the unit is
unplugged.
2. Attach the motor shaft attachment to the blending base.
3. Lock the plastic food processor bowl onto the base (See “Locking the bowl”).
4. Place citrus press plastic strainer on the removable drive attachment, then place
the citrus press juicing cone on the removable drive attachment on top of the
citrus press plastic strainer
5. The large cone is suitable for juicing small citrus fruit, such as grapefruit,
oranges etc. The small cone is suitable for juicing small citrus fruit, such as
lemons, limes etc.
6. Cut a citrus fruit in half and press the cut end of one fruit half onto the cone.
Turn on the machine and choose the speed. Please select a low speed before
juicing and gradually increase it throughout the juicing process.
7. The cone scrapes the pulp out and squeezes the juice from the fruit.
8. To maximize the quantity of juice extracted from a fruit, press a fruit onto the
cone several times.
Processing using the blending jug
1. First check the position of the safety switch.
2. Put the sealing ring into blender base slot then screw and fasten the
blending jug into the blending base (clockwise for fastening and
counterclockwise for loosening).
Blender lid
Blending jug
Blender base

12
3. Screw the blender base clockwise into the main machine motor body
(counter clockwise for loosening).
4. Add desired ingredients and put the blender lid and the blender cap on.
5. Select the appropriate speed for blending the ingredients.
TROUBLESHOOTING GUIDE
POTENTIAL PROBLEM
PROBABLECAUSE/SOLUTION
Unit does not operate on
any speed or Pulse mode.
•Is the unit plugged in? Does the power outlet work?
•Is the bowl and bowl lid all locked in place? See “Operating instructions”
Food is not chopped,
sliced or shredded
uniformly.
•Packing too much food in the feed chute, or pushing too hard on the safety
pusher may cause the processed food to be irregularly sliced or shredded.
Unit stops and will
not switch back on.
•Are the bowl and bowl lid all locked in place? They may have moved slightly
during processing. See “Operating instructions.”
•Is the power outlet still working? Check this, by plugging in any other working
appliance. You may have overloaded the circuit and blown a fuse or tripped
the circuit breaker.
•Turn the unit OFF, allow the appliance to rest for 3 to 4 minutes, and then turn
the appliance back ON. If none of these suggestions correct the problem, DO
NOT attempt to repair the unit. Call the Customer Service number to get the
name of your nearest Authorized Service Centre.
Unit has a burning smell.
•There maybe residue left on the motor from the manufacturing process, causing a
slight odour during initial use. This will go away. If a strong odour or any visible
smoke appears, unplug the unit IMMEDIATELY and call the Customer Service
number.
Motor seems weak.
•Are you using the correct speed for theitem you are processing?
•Do the food items need to be diced into pieces before processing?

13
RELEASING THE SUCTION CUP FEET AFTER USE
The suction cup feet on the bottom of the food processor are designed to keep the unit
stationary during use. To maximize the life of the unit please review the following
instructions:
1. Lift the fully assembled food processor from the counter by placing hands
underneath the unit as shown and lift it to one side
2. Alternatively lift it from the counter by grabbing the food processor bowl handle
as shown and lifting from the same side as the bowl handle
3. If bowl and lid removed are from food the food processor: Lift it from the counter
by placing your hands underneath the unit as shown and lift it to one side

14
CLEANING AND MAINTENANCE
1. Wash the bowl, lids, blades, discs, removable drive attachment and safety
pusher in warm, soapy water.
2. Rinse and dry thoroughly. To clean food thoroughly from the bowl and the
bowl lid/feed chute, immerse in warm, soapy water. NOTE: Do not store the
unit with lid in locked position; this may put strain on the interlock tab.
3. Wipe base, control panel, and cord with a damp cloth or sponge. To remove
stubborn foods, use a mild non-abrasive cleanser.
4. To store, place bowl on base. Then place chopping/slicing/mixing blade on
motor shaft attachment and the thin slicing/fine shredding disc on
chopping/slicing/mixing blade. The removable drive attachment may be
stored in the bowl. Place lid on bowl but do not lock.
5. Place a drop of vegetable oil on the blades of the food processor on a
monthly basis.
SMOOTHIE MAKER RECIPES
Banana Smoothie
Ingredients:
1Banana Peeled & Sliced
¼ Cup Oats
1Tbsp Honey
1 Tbsp Peanut Butter
100g flax seeds
150ml Yogurt
1 Cup Ice
Method:
1. Add all ingredients into the blender.
2. Pulse it at first to break the ice.
3. Blend for about 2 minutes until smooth.
Tip
- This smoothie is great for sustained energy throughout the day.

15
- The banana has high levels of potassium, helping you to quickly replenish
electrolytes. (The riper a banana, the higher sugar content), the peanut butter is
high in protein and the raw oats is a Low GI filler.
- Flax seed is a great source of fibre and Omega 3 fatty acids, and yoghurt
contains protein, calcium, riboflavin, vitamin B6and vitamin B12.
Berry smoothie
Ingredients:
1 Cup Strawberry, blueberry & Raspberry
150ml low fat ice cream/frozen yogurt
1 Banana
1 Cup Ice
Method:
1. Add all ingredients into the blender.
2. Pulse it at first to break the ice.
3. Blend for about 2 minutes until smooth.
Tip.
- Strawberry –high in vitamin C and antioxidants
- Blueberry - high level of antioxidants and may be considered most nutritional
berry
- Raspberry - sweet taste along with vitamin C, vitamin E, and a good weight loss
supplement
- Banana-high in dietary fibre
Coconut Smoothie
Ingredients:
1 Tin coconut milk
1 tablespoon sesame oil
1 tablespoon flax seeds
1 teaspoon vanilla extract
1 Tbsp Honey

16
1 Cup ice
Method:
1. Add all ingredients into the blender.
2. Pulse it at first to break the ice.
3. Blend for about 2 minutes until smooth.
Tip
- Sesame oil is a source of vitamin E which is an anti-oxidant and has been
correlated with lowering cholesterol levels.
- Flax seed is a great source of fibre and Omega 3 fatty acids.
Fruit & Muesli smoothie
Ingredients:
1½ cups low-fat milk
2 tablespoons low-fat natural or vanilla yoghurt
1 ripe banana
¼ cup chopped berries: strawberries, raspberries, blueberries
1-2 tablespoons muesli
½ Cup Rolled Oats
1 cup ice
Method:
1. Add all ingredients into the blender.
2. Pulse it at first to break the ice.
3. Blend for about 2 minutes until smooth.
Tip:
This delicious smoothie is a meal in itself, rich in protein, complex carbohydrates, dietary
fibre, vitamin C and antioxidants. Sweetened naturally with berries and banana.

17
Green tea Smoothie
Ingredients:
250ml Green Tea
1Tbsp Honey
1 Tsp Chopped Mint
100ml Vanilla flavoured low fat ice cream/frozen yoghurt
Method
1. Brew a cup of green tea using 2 tea bags and chill.
2. Once the tea has cooled down, add all ingredients into the blender.
3. Blend for about 2 minutes until smooth.
Tip:
- Green tea has tons of antioxidants, helps boost metabolism, and stabilizes
Cholesterol.
- Fresh mint works as a decongestant for illness such as the common cold.
High Fiber/Low GI Smoothie
Ingredients:
½ Papino
1Tbsp Flax Seeds
2Tbsp Digestive Bran
1/2Cup 100% Orange juice
1/2Cup Low Fat Cultured Yogurt
1 Tbsp Honey
1 Cup Ice
Method:
1. Add all ingredients into the blender.
2. Pulse it at first to break the ice.
3. Blend for about 2 minutes until smooth.

18
Tip:
- Papaya fruit is an excellent source of dietary fiber, folate, vitamin A, C and E. It
also contains small amount of calcium, iron, riboflavin, thiamine and niacine. It is
also very rich in antioxidant nutrients flavonoids and carotenes, very high in
vitamin C plus A, and low in calories and sodium.
- Flax seed is a great source of fibre and Omega 3 fatty acids, and yogurt contains
protein, calcium, riboflavin, vitamin B6and vitamin B12.
Low fat Chocolate Crunch Smoothie
Ingredients:
1 Cup 2% milk
1 Tbsp Cocoa Powder
½ Cup peanuts/ cashews
1 Tbsp Honey
¼ tsp Vanilla essence
1 Cup Ice
Method
1. Add all ingredients into the blender.
2. Pulse it at first to break the ice.
3. Blend for about 2 minutes until smooth.
Tip:
- This smoothie is low fat and delicious.
- For an iced coffee, replace the cocoa powder with instant coffee powder or a
chilled espresso.
Spiced Mango lassi
Ingredients:
1 Large Mango, peeled & Chopped
1 Cup Plain Low Fat Yogurt
1 Tbsp Honey
¼ Tsp Ground Cinnamon

19
1/8 Tsp Ground Cardamom
½ Tsp vanilla Extract
1 Cup Ice
Method:
1. Add all ingredients into the blender.
2. Pulse it at first to break the ice.
3. Blend for about 2 minutes until smooth.
Tip:
- This rendition of India's popular yogurt shake makes a cooling counterpoint to
any spicy dish
- For a great cocktail, add 50 ml dark rum.
Sweet Melon Smoothie (Serves 4)
Ingredients:
½ Honey Melon
Thumb size Ginger, peeled
1 medium Cucumber
1 TBSP Honey
150 ml Yogurt
1 Cup Ice
Method:
1. Add all ingredients into the blender.
2. Pulse it at first to break the ice.
3. Blend for about 2 minutes until smooth.
Tip:
- Cucumbers, part of the melon family, are rich in Vitamin C and dietry fibre.
- Ginger is a great source of anti-oxidants, making this smoothie a delightfully
fresh way to strengthen your immune system.

20
Tomato Smoothie
Ingredients:
2 tomatoes (chopped then frozen)
1 small tin of tomato juice
¼ Cup Chopped Celery juice and rind of 1/2 lemon
Tbsp Chopped basil leaves
Tobasco To taste
Salt & Pepper to taste
1 Cup Ice
Method:
1. Add all ingredients into the blender.
2. Pulse it at first to break the ice.
3. Blend for about 2 minutes until smooth.
Tip:
- This smoothie is great for sustained energy throughout the day.
- The banana has high levels of potassium, helping you to quickly replenish
electrolytes. (The riper a banana, the higher sugar content).
- The peanut butter is high in protein and the raw oats is a Low GI filler.
- Flax seed is a great source of fibre and Omega 3 fatty acids, and yoghurt
contains protein, calcium, riboflavin, vitamin B6and vitamin B12.
STORING THE APPLIANCE
•Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
•Store the appliance in its box or in a clean, dry place.
•Never store the appliance while it is still dirty.
•Never wrap the power cord around the appliance.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating
correctly, please check the following: